The SolidRun CN9130 SoC based boards have a variety of functional
problems, in particular
- SATA ports
- CN9132 CEX-7 eMMC
- CN9132 Clearfog PCI-E x2 / x4 ports
are not functional.
The SATA issue was recently introduced via changes to the
armada-cp11x.dtsi, wheras the eMMC and SPI problems were present in the
board dts from the very beginning.
This patch-set aims to resolve the problems after testing on Debian 13
release (Linux v6.12).
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Changes in v2:
- fixed mistakes in the original board device-trees that caused
functional issues with eMMC and pci.
- Link to v1: https://lore.kernel.org/r/20250911-cn913x-sr-fix-sata-v1-1-9e72238d0988@solid-run.com
---
Josua Mayer (4):
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9130-sr-som: add missing properties to emmc
arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 7 ++++---
arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 2 ++
arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 6 ++++--
arch/arm64/boot/dts/marvell/cn9132-clearfog.dts | 22 ++++++++++++++++------
arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi | 8 ++++++++
5 files changed, 34 insertions(+), 11 deletions(-)
---
base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585
change-id: 20250911-cn913x-sr-fix-sata-5c737ebdb97f
Best regards,
--
Josua Mayer <josua@solid-run.com>