From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The Renesas RZ/G3S SoC USB PHY HW block receives as input the USB PWRRDY
signal from the system controller. Add support for the Renesas RZ/G3S SoC.

Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v6:
- collected tags

Changes in v5:
- none

Changes in v4:
- none

Changes in v3:
- none; this patch is new

 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
index c58bf19993c1..a7fbf5c50940 100644
--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -108,6 +108,10 @@ static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
 
 static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
 	{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
+	{
+		.compatible = "renesas,r9a08g045-usbphy-ctrl",
+		.data = (void *)RZG2L_USBPHY_CTRL_PWRRDY
+	},
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
-- 
2.43.0