From: Ryan Wanner <Ryan.Wanner@microchip.com>

Add the USER button as a GPIO input as well as add the LEDs and enable
the blue LED as a heartbeat.

Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
 .../dts/microchip/at91-sama7d65_curiosity.dts | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
index f091cc40a9f0..2fe34c59d942 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -11,6 +11,7 @@
 #include "sama7d65-pinfunc.h"
 #include "sama7d65.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -26,6 +27,42 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
@@ -352,6 +389,18 @@ pinctrl_i2c10_default: i2c10-default {
 		bias-pull-up;
 	};
 
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PC10__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PB15__GPIO>,
+			 <PIN_PB17__GPIO>,
+			 <PIN_PA21__GPIO>;
+		bias-pull-up;
+	};
+
 	pinctrl_sdmmc1_default: sdmmc1-default {
 		cmd-data {
 			pinmux = <PIN_PB22__SDMMC1_CMD>,
-- 
2.43.0

Hello Ryan,

Am Tue, Sep 09, 2025 at 09:08:38AM -0700 schrieb Ryan.Wanner@microchip.com:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> Add the USER button as a GPIO input as well as add the LEDs and enable
> the blue LED as a heartbeat.
> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> ---
>  .../dts/microchip/at91-sama7d65_curiosity.dts | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> index f091cc40a9f0..2fe34c59d942 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> @@ -11,6 +11,7 @@
>  #include "sama7d65-pinfunc.h"
>  #include "sama7d65.dtsi"
>  #include <dt-bindings/mfd/atmel-flexcom.h>
> +#include <dt-bindings/input/input.h>
>  #include <dt-bindings/pinctrl/at91.h>
>  
>  / {
> @@ -26,6 +27,42 @@ chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_key_gpio_default>;
> +
> +		button {
> +			label = "PB_USER";
> +			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_PROG1>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_led_gpio_default>;
> +
> +		led-red {
> +			label = "red";
> +			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
> +		};
> +
> +		led-green {
> +			label = "green";
> +			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
> +		};
> +
> +		led-blue {
> +			label = "blue";
> +			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};

The label property is deprecated.  Please use the properties "color"
and "function" for new boards.  See devicetree binding documentation
for LEDs.

Thanks and greetings
Alex

> +
>  	memory@60000000 {
>  		device_type = "memory";
>  		reg = <0x60000000 0x40000000>;
> @@ -352,6 +389,18 @@ pinctrl_i2c10_default: i2c10-default {
>  		bias-pull-up;
>  	};
>  
> +	pinctrl_key_gpio_default: key-gpio-default {
> +		pinmux = <PIN_PC10__GPIO>;
> +		bias-pull-up;
> +	};
> +
> +	pinctrl_led_gpio_default: led-gpio-default {
> +		pinmux = <PIN_PB15__GPIO>,
> +			 <PIN_PB17__GPIO>,
> +			 <PIN_PA21__GPIO>;
> +		bias-pull-up;
> +	};
> +
>  	pinctrl_sdmmc1_default: sdmmc1-default {
>  		cmd-data {
>  			pinmux = <PIN_PB22__SDMMC1_CMD>,
> -- 
> 2.43.0
> 
>

Hello Ryan,

Am Wed, Sep 10, 2025 at 08:20:28AM +0200 schrieb Alexander Dahl:
> Hello Ryan,
> 
> Am Tue, Sep 09, 2025 at 09:08:38AM -0700 schrieb Ryan.Wanner@microchip.com:
> > From: Ryan Wanner <Ryan.Wanner@microchip.com>
> > 
> > Add the USER button as a GPIO input as well as add the LEDs and enable
> > the blue LED as a heartbeat.
> > 
> > Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> > ---
> >  .../dts/microchip/at91-sama7d65_curiosity.dts | 49 +++++++++++++++++++
> >  1 file changed, 49 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> > index f091cc40a9f0..2fe34c59d942 100644
> > --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> > +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> > @@ -11,6 +11,7 @@
> >  #include "sama7d65-pinfunc.h"
> >  #include "sama7d65.dtsi"
> >  #include <dt-bindings/mfd/atmel-flexcom.h>
> > +#include <dt-bindings/input/input.h>
> >  #include <dt-bindings/pinctrl/at91.h>
> >  
> >  / {
> > @@ -26,6 +27,42 @@ chosen {
> >  		stdout-path = "serial0:115200n8";
> >  	};
> >  
> > +	gpio-keys {
> > +		compatible = "gpio-keys";
> > +
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_key_gpio_default>;
> > +
> > +		button {
> > +			label = "PB_USER";
> > +			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
> > +			linux,code = <KEY_PROG1>;
> > +			wakeup-source;
> > +		};
> > +	};
> > +
> > +	leds {
> > +		compatible = "gpio-leds";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_led_gpio_default>;
> > +
> > +		led-red {
> > +			label = "red";
> > +			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
> > +		};
> > +
> > +		led-green {
> > +			label = "green";
> > +			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
> > +		};
> > +
> > +		led-blue {
> > +			label = "blue";
> > +			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
> > +			linux,default-trigger = "heartbeat";
> > +		};
> > +	};
> 
> The label property is deprecated.  Please use the properties "color"
> and "function" for new boards.  See devicetree binding documentation
> for LEDs.

From a quick glance, this seems to be an RGB-LED, so I would suggest
to not model it as three distinct LEDs, but make use of the
"leds-group-multicolor" feature, example:

 59         multi-led {
 60                 compatible = "leds-group-multicolor";
 61                 color = <LED_COLOR_ID_RGB>;
 62                 function = LED_FUNCTION_INDICATOR;
 63                 leds = <&led_red>, <&led_green>, <&led_blue>;
 64         };

Greets
Alex

> 
> Thanks and greetings
> Alex
> 
> > +
> >  	memory@60000000 {
> >  		device_type = "memory";
> >  		reg = <0x60000000 0x40000000>;
> > @@ -352,6 +389,18 @@ pinctrl_i2c10_default: i2c10-default {
> >  		bias-pull-up;
> >  	};
> >  
> > +	pinctrl_key_gpio_default: key-gpio-default {
> > +		pinmux = <PIN_PC10__GPIO>;
> > +		bias-pull-up;
> > +	};
> > +
> > +	pinctrl_led_gpio_default: led-gpio-default {
> > +		pinmux = <PIN_PB15__GPIO>,
> > +			 <PIN_PB17__GPIO>,
> > +			 <PIN_PA21__GPIO>;
> > +		bias-pull-up;
> > +	};
> > +
> >  	pinctrl_sdmmc1_default: sdmmc1-default {
> >  		cmd-data {
> >  			pinmux = <PIN_PB22__SDMMC1_CMD>,
> > -- 
> > 2.43.0
> > 
> > 
>

On 9/9/25 23:25, Alexander Dahl wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hello Ryan,
> 
> Am Wed, Sep 10, 2025 at 08:20:28AM +0200 schrieb Alexander Dahl:
>> Hello Ryan,
>>
>> Am Tue, Sep 09, 2025 at 09:08:38AM -0700 schrieb Ryan.Wanner@microchip.com:
>>> From: Ryan Wanner <Ryan.Wanner@microchip.com>
>>>
>>> Add the USER button as a GPIO input as well as add the LEDs and enable
>>> the blue LED as a heartbeat.
>>>
>>> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
>>> ---
>>>  .../dts/microchip/at91-sama7d65_curiosity.dts | 49 +++++++++++++++++++
>>>  1 file changed, 49 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
>>> index f091cc40a9f0..2fe34c59d942 100644
>>> --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
>>> +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
>>> @@ -11,6 +11,7 @@
>>>  #include "sama7d65-pinfunc.h"
>>>  #include "sama7d65.dtsi"
>>>  #include <dt-bindings/mfd/atmel-flexcom.h>
>>> +#include <dt-bindings/input/input.h>
>>>  #include <dt-bindings/pinctrl/at91.h>
>>>
>>>  / {
>>> @@ -26,6 +27,42 @@ chosen {
>>>             stdout-path = "serial0:115200n8";
>>>     };
>>>
>>> +   gpio-keys {
>>> +           compatible = "gpio-keys";
>>> +
>>> +           pinctrl-names = "default";
>>> +           pinctrl-0 = <&pinctrl_key_gpio_default>;
>>> +
>>> +           button {
>>> +                   label = "PB_USER";
>>> +                   gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
>>> +                   linux,code = <KEY_PROG1>;
>>> +                   wakeup-source;
>>> +           };
>>> +   };
>>> +
>>> +   leds {
>>> +           compatible = "gpio-leds";
>>> +           pinctrl-names = "default";
>>> +           pinctrl-0 = <&pinctrl_led_gpio_default>;
>>> +
>>> +           led-red {
>>> +                   label = "red";
>>> +                   gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
>>> +           };
>>> +
>>> +           led-green {
>>> +                   label = "green";
>>> +                   gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
>>> +           };
>>> +
>>> +           led-blue {
>>> +                   label = "blue";
>>> +                   gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
>>> +                   linux,default-trigger = "heartbeat";
>>> +           };
>>> +   };
>>
>> The label property is deprecated.  Please use the properties "color"
>> and "function" for new boards.  See devicetree binding documentation
>> for LEDs.
> 
> From a quick glance, this seems to be an RGB-LED, so I would suggest
> to not model it as three distinct LEDs, but make use of the
> "leds-group-multicolor" feature, example:
> 
>  59         multi-led {
>  60                 compatible = "leds-group-multicolor";
>  61                 color = <LED_COLOR_ID_RGB>;
>  62                 function = LED_FUNCTION_INDICATOR;
>  63                 leds = <&led_red>, <&led_green>, <&led_blue>;
>  64         };

I see, I was not aware of this feature. This would combine all of the
LED pins into one RGB light correct, it seems from sysfs that this is
the case.

Would having the default-trigger="heartbeat" still be allowed for the
led-blue node or should that be moved into the multi-led node? From the
bindings it seems that the default trigger is still in the gpio-led nodes.

Best,
Ryan
> 
> Greets
> Alex
> 
>>
>> Thanks and greetings
>> Alex
>>
>>> +
>>>     memory@60000000 {
>>>             device_type = "memory";
>>>             reg = <0x60000000 0x40000000>;
>>> @@ -352,6 +389,18 @@ pinctrl_i2c10_default: i2c10-default {
>>>             bias-pull-up;
>>>     };
>>>
>>> +   pinctrl_key_gpio_default: key-gpio-default {
>>> +           pinmux = <PIN_PC10__GPIO>;
>>> +           bias-pull-up;
>>> +   };
>>> +
>>> +   pinctrl_led_gpio_default: led-gpio-default {
>>> +           pinmux = <PIN_PB15__GPIO>,
>>> +                    <PIN_PB17__GPIO>,
>>> +                    <PIN_PA21__GPIO>;
>>> +           bias-pull-up;
>>> +   };
>>> +
>>>     pinctrl_sdmmc1_default: sdmmc1-default {
>>>             cmd-data {
>>>                     pinmux = <PIN_PB22__SDMMC1_CMD>,
>>> --
>>> 2.43.0
>>>
>>>
>>

Hello Ryan,

Am Wed, Sep 10, 2025 at 10:16:03AM -0700 schrieb Ryan Wanner:
> On 9/9/25 23:25, Alexander Dahl wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > 
> > Hello Ryan,
> > 
> > Am Wed, Sep 10, 2025 at 08:20:28AM +0200 schrieb Alexander Dahl:
> >> Hello Ryan,
> >>
> >> Am Tue, Sep 09, 2025 at 09:08:38AM -0700 schrieb Ryan.Wanner@microchip.com:
> >>> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> >>>
> >>> Add the USER button as a GPIO input as well as add the LEDs and enable
> >>> the blue LED as a heartbeat.
> >>>
> >>> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> >>> ---
> >>>  .../dts/microchip/at91-sama7d65_curiosity.dts | 49 +++++++++++++++++++
> >>>  1 file changed, 49 insertions(+)
> >>>
> >>> diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> >>> index f091cc40a9f0..2fe34c59d942 100644
> >>> --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> >>> +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> >>> @@ -11,6 +11,7 @@
> >>>  #include "sama7d65-pinfunc.h"
> >>>  #include "sama7d65.dtsi"
> >>>  #include <dt-bindings/mfd/atmel-flexcom.h>
> >>> +#include <dt-bindings/input/input.h>
> >>>  #include <dt-bindings/pinctrl/at91.h>
> >>>
> >>>  / {
> >>> @@ -26,6 +27,42 @@ chosen {
> >>>             stdout-path = "serial0:115200n8";
> >>>     };
> >>>
> >>> +   gpio-keys {
> >>> +           compatible = "gpio-keys";
> >>> +
> >>> +           pinctrl-names = "default";
> >>> +           pinctrl-0 = <&pinctrl_key_gpio_default>;
> >>> +
> >>> +           button {
> >>> +                   label = "PB_USER";
> >>> +                   gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
> >>> +                   linux,code = <KEY_PROG1>;
> >>> +                   wakeup-source;
> >>> +           };
> >>> +   };
> >>> +
> >>> +   leds {
> >>> +           compatible = "gpio-leds";
> >>> +           pinctrl-names = "default";
> >>> +           pinctrl-0 = <&pinctrl_led_gpio_default>;
> >>> +
> >>> +           led-red {
> >>> +                   label = "red";
> >>> +                   gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
> >>> +           };
> >>> +
> >>> +           led-green {
> >>> +                   label = "green";
> >>> +                   gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
> >>> +           };
> >>> +
> >>> +           led-blue {
> >>> +                   label = "blue";
> >>> +                   gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
> >>> +                   linux,default-trigger = "heartbeat";
> >>> +           };
> >>> +   };
> >>
> >> The label property is deprecated.  Please use the properties "color"
> >> and "function" for new boards.  See devicetree binding documentation
> >> for LEDs.
> > 
> > From a quick glance, this seems to be an RGB-LED, so I would suggest
> > to not model it as three distinct LEDs, but make use of the
> > "leds-group-multicolor" feature, example:
> > 
> >  59         multi-led {
> >  60                 compatible = "leds-group-multicolor";
> >  61                 color = <LED_COLOR_ID_RGB>;
> >  62                 function = LED_FUNCTION_INDICATOR;
> >  63                 leds = <&led_red>, <&led_green>, <&led_blue>;
> >  64         };
> 
> I see, I was not aware of this feature. This would combine all of the
> LED pins into one RGB light correct, it seems from sysfs that this is
> the case.

The group-multicolor feature was merged for kernel v6.6 so it's still
quite new.  I tried this some time ago, so this is from memory only.
The three single color gpio leds are still visible in sysfs, but you
can not control them independently anymore, only through the sysfs
interface of that one multicolor led.

> Would having the default-trigger="heartbeat" still be allowed for the
> led-blue node or should that be moved into the multi-led node? From the
> bindings it seems that the default trigger is still in the gpio-led nodes.

Sorry, not sure here.  I put linux-leds in Cc, maybe someone over
there can answer.  If this does not fit how Microchip wants to handle
that LED on their boards I think that's fine, too.  Just wanted to
make people aware of the possibility.

Greets
Alex

> 
> Best,
> Ryan
> > 
> > Greets
> > Alex
> > 
> >>
> >> Thanks and greetings
> >> Alex
> >>
> >>> +
> >>>     memory@60000000 {
> >>>             device_type = "memory";
> >>>             reg = <0x60000000 0x40000000>;
> >>> @@ -352,6 +389,18 @@ pinctrl_i2c10_default: i2c10-default {
> >>>             bias-pull-up;
> >>>     };
> >>>
> >>> +   pinctrl_key_gpio_default: key-gpio-default {
> >>> +           pinmux = <PIN_PC10__GPIO>;
> >>> +           bias-pull-up;
> >>> +   };
> >>> +
> >>> +   pinctrl_led_gpio_default: led-gpio-default {
> >>> +           pinmux = <PIN_PB15__GPIO>,
> >>> +                    <PIN_PB17__GPIO>,
> >>> +                    <PIN_PA21__GPIO>;
> >>> +           bias-pull-up;
> >>> +   };
> >>> +
> >>>     pinctrl_sdmmc1_default: sdmmc1-default {
> >>>             cmd-data {
> >>>                     pinmux = <PIN_PB22__SDMMC1_CMD>,
> >>> --
> >>> 2.43.0
> >>>
> >>>
> >>
> 
>

On 9/11/25 00:00, Alexander Dahl wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hello Ryan,
> 
> Am Wed, Sep 10, 2025 at 10:16:03AM -0700 schrieb Ryan Wanner:
>> On 9/9/25 23:25, Alexander Dahl wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> Hello Ryan,
>>>
>>> Am Wed, Sep 10, 2025 at 08:20:28AM +0200 schrieb Alexander Dahl:
>>>> Hello Ryan,
>>>>
>>>> Am Tue, Sep 09, 2025 at 09:08:38AM -0700 schrieb Ryan.Wanner@microchip.com:
>>>>> From: Ryan Wanner <Ryan.Wanner@microchip.com>
>>>>>
>>>>> Add the USER button as a GPIO input as well as add the LEDs and enable
>>>>> the blue LED as a heartbeat.
>>>>>
>>>>> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
>>>>> ---
>>>>>  .../dts/microchip/at91-sama7d65_curiosity.dts | 49 +++++++++++++++++++
>>>>>  1 file changed, 49 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
>>>>> index f091cc40a9f0..2fe34c59d942 100644
>>>>> --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
>>>>> +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
>>>>> @@ -11,6 +11,7 @@
>>>>>  #include "sama7d65-pinfunc.h"
>>>>>  #include "sama7d65.dtsi"
>>>>>  #include <dt-bindings/mfd/atmel-flexcom.h>
>>>>> +#include <dt-bindings/input/input.h>
>>>>>  #include <dt-bindings/pinctrl/at91.h>
>>>>>
>>>>>  / {
>>>>> @@ -26,6 +27,42 @@ chosen {
>>>>>             stdout-path = "serial0:115200n8";
>>>>>     };
>>>>>
>>>>> +   gpio-keys {
>>>>> +           compatible = "gpio-keys";
>>>>> +
>>>>> +           pinctrl-names = "default";
>>>>> +           pinctrl-0 = <&pinctrl_key_gpio_default>;
>>>>> +
>>>>> +           button {
>>>>> +                   label = "PB_USER";
>>>>> +                   gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
>>>>> +                   linux,code = <KEY_PROG1>;
>>>>> +                   wakeup-source;
>>>>> +           };
>>>>> +   };
>>>>> +
>>>>> +   leds {
>>>>> +           compatible = "gpio-leds";
>>>>> +           pinctrl-names = "default";
>>>>> +           pinctrl-0 = <&pinctrl_led_gpio_default>;
>>>>> +
>>>>> +           led-red {
>>>>> +                   label = "red";
>>>>> +                   gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
>>>>> +           };
>>>>> +
>>>>> +           led-green {
>>>>> +                   label = "green";
>>>>> +                   gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
>>>>> +           };
>>>>> +
>>>>> +           led-blue {
>>>>> +                   label = "blue";
>>>>> +                   gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
>>>>> +                   linux,default-trigger = "heartbeat";
>>>>> +           };
>>>>> +   };
>>>>
>>>> The label property is deprecated.  Please use the properties "color"
>>>> and "function" for new boards.  See devicetree binding documentation
>>>> for LEDs.
>>>
>>> From a quick glance, this seems to be an RGB-LED, so I would suggest
>>> to not model it as three distinct LEDs, but make use of the
>>> "leds-group-multicolor" feature, example:
>>>
>>>  59         multi-led {
>>>  60                 compatible = "leds-group-multicolor";
>>>  61                 color = <LED_COLOR_ID_RGB>;
>>>  62                 function = LED_FUNCTION_INDICATOR;
>>>  63                 leds = <&led_red>, <&led_green>, <&led_blue>;
>>>  64         };
>>
>> I see, I was not aware of this feature. This would combine all of the
>> LED pins into one RGB light correct, it seems from sysfs that this is
>> the case.
> 
> The group-multicolor feature was merged for kernel v6.6 so it's still
> quite new.  I tried this some time ago, so this is from memory only.
> The three single color gpio leds are still visible in sysfs, but you
> can not control them independently anymore, only through the sysfs
> interface of that one multicolor led.
> 
>> Would having the default-trigger="heartbeat" still be allowed for the
>> led-blue node or should that be moved into the multi-led node? From the
>> bindings it seems that the default trigger is still in the gpio-led nodes.
> 
> Sorry, not sure here.  I put linux-leds in Cc, maybe someone over
> there can answer.  If this does not fit how Microchip wants to handle
> that LED on their boards I think that's fine, too.  Just wanted to
> make people aware of the possibility.

It does not fit very well how we want to handle the LEDs on this board
as of right now. I am assuming it is fine for now to have these as
individual LEDs?

Best,
Ryan>
> Greets
> Alex
> 
>>
>> Best,
>> Ryan
>>>
>>> Greets
>>> Alex
>>>
>>>>
>>>> Thanks and greetings
>>>> Alex
>>>>
>>>>> +
>>>>>     memory@60000000 {
>>>>>             device_type = "memory";
>>>>>             reg = <0x60000000 0x40000000>;
>>>>> @@ -352,6 +389,18 @@ pinctrl_i2c10_default: i2c10-default {
>>>>>             bias-pull-up;
>>>>>     };
>>>>>
>>>>> +   pinctrl_key_gpio_default: key-gpio-default {
>>>>> +           pinmux = <PIN_PC10__GPIO>;
>>>>> +           bias-pull-up;
>>>>> +   };
>>>>> +
>>>>> +   pinctrl_led_gpio_default: led-gpio-default {
>>>>> +           pinmux = <PIN_PB15__GPIO>,
>>>>> +                    <PIN_PB17__GPIO>,
>>>>> +                    <PIN_PA21__GPIO>;
>>>>> +           bias-pull-up;
>>>>> +   };
>>>>> +
>>>>>     pinctrl_sdmmc1_default: sdmmc1-default {
>>>>>             cmd-data {
>>>>>                     pinmux = <PIN_PB22__SDMMC1_CMD>,
>>>>> --
>>>>> 2.43.0
>>>>>
>>>>>
>>>>
>>
>>