Document support for Airoha AN8855 Switch SoC. This SoC expose various
peripherals like an Ethernet Switch, a NVMEM provider and Ethernet PHYs.

It does also support i2c and timers but those are not currently
supported/used.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../bindings/mfd/airoha,an8855.yaml           | 175 ++++++++++++++++++
 1 file changed, 175 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/airoha,an8855.yaml

diff --git a/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml b/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
new file mode 100644
index 000000000000..a683db4f41d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/airoha,an8855.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN8855 Switch SoC
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: >
+  Airoha AN8855 Switch is a SoC that expose various peripherals like an
+  Ethernet Switch, a NVMEM provider and Ethernet PHYs.
+
+  It does also support i2c and timers but those are not currently
+  supported/used.
+
+properties:
+  compatible:
+    const: airoha,an8855
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+
+  efuse:
+    type: object
+    $ref: /schemas/nvmem/airoha,an8855-efuse.yaml
+    description: EFUSE exposed by the Airoha AN8855 SoC
+
+  ethernet-switch:
+    type: object
+    $ref: /schemas/net/dsa/airoha,an8855-switch.yaml
+    description: Switch exposed by the Airoha AN8855 SoC
+
+  mdio:
+    type: object
+    $ref: /schemas/net/airoha,an8855-mdio.yaml
+    description: MDIO exposed by the Airoha AN8855 SoC
+
+required:
+  - compatible
+  - reg
+  - mdio
+  - ethernet-switch
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        soc@1 {
+            compatible = "airoha,an8855";
+            reg = <1>;
+
+            reset-gpios = <&pio 39 0>;
+
+            efuse {
+                compatible = "airoha,an8855-efuse";
+
+                #nvmem-cell-cells = <0>;
+
+                nvmem-layout {
+                    compatible = "fixed-layout";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    shift_sel_port0_tx_a: shift-sel-port0-tx-a@c {
+                       reg = <0xc 0x4>;
+                    };
+
+                    shift_sel_port0_tx_b: shift-sel-port0-tx-b@10 {
+                        reg = <0x10 0x4>;
+                    };
+
+                    shift_sel_port0_tx_c: shift-sel-port0-tx-c@14 {
+                        reg = <0x14 0x4>;
+                    };
+
+                    shift_sel_port0_tx_d: shift-sel-port0-tx-d@18 {
+                       reg = <0x18 0x4>;
+                    };
+
+                    shift_sel_port1_tx_a: shift-sel-port1-tx-a@1c {
+                        reg = <0x1c 0x4>;
+                    };
+
+                    shift_sel_port1_tx_b: shift-sel-port1-tx-b@20 {
+                        reg = <0x20 0x4>;
+                    };
+
+                    shift_sel_port1_tx_c: shift-sel-port1-tx-c@24 {
+                       reg = <0x24 0x4>;
+                    };
+
+                    shift_sel_port1_tx_d: shift-sel-port1-tx-d@28 {
+                        reg = <0x28 0x4>;
+                    };
+                };
+            };
+
+            ethernet-switch {
+                compatible = "airoha,an8855-switch";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                        phy-mode = "internal";
+                        phy-handle = <&internal_phy1>;
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                        phy-mode = "internal";
+                        phy-handle = <&internal_phy2>;
+                    };
+
+                    port@5 {
+                        reg = <5>;
+                        label = "cpu";
+                        ethernet = <&gmac0>;
+                        phy-mode = "2500base-x";
+
+                        fixed-link {
+                            speed = <2500>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+
+            mdio {
+                compatible = "airoha,an8855-mdio";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                internal_phy1: ethernet-phy@1 {
+                  compatible = "ethernet-phy-idc0ff.0410",
+                               "ethernet-phy-ieee802.3-c22";
+                  reg = <1>;
+
+                  nvmem-cells = <&shift_sel_port0_tx_a>,
+                      <&shift_sel_port0_tx_b>,
+                      <&shift_sel_port0_tx_c>,
+                      <&shift_sel_port0_tx_d>;
+                  nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+                };
+
+                internal_phy2: ethernet-phy@2 {
+                  compatible = "ethernet-phy-idc0ff.0410",
+                               "ethernet-phy-ieee802.3-c22";
+                  reg = <2>;
+
+                  nvmem-cells = <&shift_sel_port1_tx_a>,
+                      <&shift_sel_port1_tx_b>,
+                      <&shift_sel_port1_tx_c>,
+                      <&shift_sel_port1_tx_d>;
+                  nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+                };
+            };
+        };
+    };
-- 
2.51.0

On Tue, 09 Sep 2025 02:43:35 +0200, Christian Marangi wrote:
> Document support for Airoha AN8855 Switch SoC. This SoC expose various
> peripherals like an Ethernet Switch, a NVMEM provider and Ethernet PHYs.
> 
> It does also support i2c and timers but those are not currently
> supported/used.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../bindings/mfd/airoha,an8855.yaml           | 175 ++++++++++++++++++
>  1 file changed, 175 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml:
	Error in referenced schema matching $id: http://devicetree.org/schemas/net/airoha,an8855-mdio.yaml
	Tried these paths (check schema $id if path is wrong):
	/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/airoha,an8855-mdio.yaml
	/usr/local/lib/python3.13/dist-packages/dtschema/schemas/net/airoha,an8855-mdio.yaml

/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/airoha,an8855.example.dtb: soc@1 (airoha,an8855): mdio: {'compatible': ['airoha,an8855-mdio'], '#address-cells': 1, '#size-cells': 0, 'ethernet-phy@1': {'compatible': ['ethernet-phy-idc0ff.0410', 'ethernet-phy-ieee802.3-c22'], 'reg': [[1]], 'nvmem-cells': [[3], [4], [5], [6]], 'nvmem-cell-names': ['tx_a', 'tx_b', 'tx_c', 'tx_d'], 'phandle': 1}, 'ethernet-phy@2': {'compatible': ['ethernet-phy-idc0ff.0410', 'ethernet-phy-ieee802.3-c22'], 'reg': [[2]], 'nvmem-cells': [[7], [8], [9], [10]], 'nvmem-cell-names': ['tx_a', 'tx_b', 'tx_c', 'tx_d'], 'phandle': 2}} should not be valid under {'description': "Can't find referenced schema: http://devicetree.org/schemas/net/airoha,an8855-mdio.yaml#"}
	from schema $id: http://devicetree.org/schemas/mfd/airoha,an8855.yaml#
Documentation/devicetree/bindings/mfd/airoha,an8855.example.dtb: /example-0/mdio/soc@1/mdio: failed to match any schema with compatible: ['airoha,an8855-mdio']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250909004343.18790-5-ansuelsmth@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.