On X Elite platform, the eDP PHY uses one more clock called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So attach the this ref clock to the PHY.
Cc: stable@vger.kernel.org # v6.10
Fixes: 5d5607861350 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
.../devicetree/bindings/phy/qcom,edp-phy.yaml | 28 +++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index eb97181cbb9579893b4ee26a39c3559ad87b2fba..bfc4d75f50ff9e31981fe602478f28320545e52b 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -37,12 +37,15 @@ properties:
- description: PLL register block
clocks:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
clock-names:
+ minItems: 2
items:
- const: aux
- const: cfg_ahb
+ - const: ref
"#clock-cells":
const: 1
@@ -64,6 +67,29 @@ required:
- "#clock-cells"
- "#phy-cells"
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,x1e80100-dp-phy
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ minItems: 3
+ maxItems: 3
+ else:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ minItems: 2
+ maxItems: 2
+
additionalProperties: false
examples:
--
2.45.2