Documentation/gpu/nova/core/todo.rst | 17 - drivers/gpu/nova-core/falcon.rs | 6 +- drivers/gpu/nova-core/falcon/hal.rs | 2 +- drivers/gpu/nova-core/fb.rs | 65 +++- drivers/gpu/nova-core/firmware.rs | 107 ++++-- drivers/gpu/nova-core/firmware/booter.rs | 375 ++++++++++++++++++++++ drivers/gpu/nova-core/firmware/gsp.rs | 239 ++++++++++++++ drivers/gpu/nova-core/firmware/riscv.rs | 89 +++++ drivers/gpu/nova-core/gpu.rs | 93 ++++-- drivers/gpu/nova-core/gsp.rs | 11 + drivers/gpu/nova-core/gsp/fw.rs | 101 ++++++ drivers/gpu/nova-core/gsp/fw/r570_144.rs | 28 ++ drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs | 126 ++++++++ drivers/gpu/nova-core/nova_core.rs | 1 + drivers/gpu/nova-core/util.rs | 20 -- 15 files changed, 1184 insertions(+), 96 deletions(-)
This series makes more progress on the GSP boot process for Ampere GPUs.
At the end of the previous series [1], we were left with a WPR memory
region created by the FRTS firmware, but still far from the GSP running.
This series brings us closer to that goal by preparing 2 new firmware
packages:
* The Booter firmware, which the driver loads and runs on the SEC2
falcon;
* The GSP bootloader, which is loaded by Booter onto the GSP RISC-V
core;
* The GSP firmware itself, which is verified and loaded by the GSP
bootloader.
There 3 firmwares are involved in a rather complex dance that is made
necessary by limitations related to the level of privilege required to
load code onto the GSP (doing so requires a Heavy Secured signed
firmware, which is the role fulfilled by Booter).
The first 5 patches do some cleanup and preparatory work for the
remainder of the series. Notably, the GSP boot is moved to a new method
of `Gpu` to get ready for the additional steps that will be added to it.
We also simplify chipset name generation a bit and move the code
requesting a firmware file into a dedicated function in prevision of the
removal of the `Firmware` structure.
Patch 6 parses the Booter firmware file, queries the hardware for the
right signature to use, and patch it into the firmware blob. This makes
Booter ready to load and run.
Patches 7 and 8 prepare the GSP firmware and its bootloader, and keep
them into a single structure as they are closely related.
Patches 9 and 10 switch to the 570.144 firmware and introduce the layout
for its bindings. The raw bindings are stored in a private module, and
abstracted by the parent module as needed. This allows consumer
modules to access a safer/nicer form of the bindings than the raw one,
and also makes it easier to switch to a different (and potentially
incompatible) firmware version in the future.
570.144 has been picked because it is the latest firmware currently in
linux-firmware, but as development progresses the plan is to switch to a
newer one that is designed with the constraint of upstream in mind. So
support for 570.144 will be dropped in the future. Support for multiple
firmware versions is not considered at the moment: there is no immediate
need for it as the driver is still unstable, and we can think about this
point once we approach stability (and have better visibility about the
shape of the firmware at that point).
The last patch introduces the first bindings and uses them to compute
more framebuffer layout information needed for booting the GSP. A
separate patch series will pick up from there to use this information
and finally run these firmware blobs.
The base of this series is today's drm-rust-next, with a couple more
dependencies required:
- The Alignment series [2],
- The pin-init patch allowing references to previously initialized
fields [3],
- The following diff to make the aforementioned pin-init patch build:
--- a/rust/kernel/devres.rs
+++ b/rust/kernel/devres.rs
@@ -138,7 +138,6 @@ pub fn new<'a, E>(
try_pin_init!(&this in Self {
dev: dev.into(),
- callback,
// INVARIANT: `inner` is properly initialized.
inner <- {
// SAFETY: `this` is a valid pointer to uninitialized memory.
@@ -160,6 +159,7 @@ pub fn new<'a, E>(
data <- Revocable::new(data),
}))
},
+ callback,
})
}
A tree with all these dependencies and the patches of this series is
available at [4].
[1] https://lore.kernel.org/rust-for-linux/20250619-nova-frts-v6-0-ecf41ef99252@nvidia.com/
[2] https://lore.kernel.org/rust-for-linux/20250908-num-v5-0-c0f2f681ea96@nvidia.com/
[3] https://lore.kernel.org/rust-for-linux/20250905140047.3325945-1-lossin@kernel.org/
[4] https://github.com/Gnurou/linux/tree/b4/nova_firmware
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
Changes in v4:
- Rebase on top of latest Alignment series.
- Make use of pin-init references to initialized fields.
- Remove all uses of `unsafe` except for `FromBytes` and `AsBytes`
implementations.
- Keep the GSP placeholder inside the `Gpu` struct.
- Move GSP firmware bindings under the `gsp` module.
- Get the firmware-specific information from the bindings instead of a
HAL.
- Link to v3: https://lore.kernel.org/r/20250902-nova_firmware-v3-0-56854d9c5398@nvidia.com
Changes in v3:
- Move the GSP boot process out of the Gpu constructor.
- Get rid of the `Firmware` struct and discard loaded firmware blobs
after the GSP is booted.
- Consolidate the GSP firmware, bootloader and signatures into a single
type.
- Make firmware bindings completely opaque to the driver.
- Improve firmware abstractions related to framebuffer carveout.
- Improve comments and naming throughout the series. (thanks John!)
- Use alias for bindings module in `nvfw` to avoid repeated version
numbers everywhere. (thanks John!)
- Fix inconsistency in naming of members of Booter header. (thanks
Timur!)
- Link to v2: https://lore.kernel.org/r/20250826-nova_firmware-v2-0-93566252fe3a@nvidia.com
Changes in v2:
- Add some GSP bindings and use them to compute more FB layout info
needed to boot GSP,
- Use PinInit in GspFirmware to avoid several heap allocations,
- Rename `bootloader` to `gsp_bootloader` in `Firmware` to avoid
confusion with the future Turing falcon bootloader,
- Link to v1: https://lore.kernel.org/r/20250822-nova_firmware-v1-0-ff5633679460@nvidia.com
---
Alexandre Courbot (10):
gpu: nova-core: require `Send` on `FalconEngine` and `FalconHal`
gpu: nova-core: move GSP boot code to a dedicated method
gpu: nova-core: add Chipset::name() method
gpu: nova-core: firmware: move firmware request code into a function
gpu: nova-core: firmware: add support for common firmware header
gpu: nova-core: firmware: process Booter and patch its signature
gpu: nova-core: firmware: process and prepare the GSP firmware
gpu: nova-core: firmware: process the GSP bootloader
gpu: nova-core: firmware: use 570.144 firmware
gpu: nova-core: compute layout of more framebuffer regions required for GSP
Alistair Popple (1):
gpu: nova-core: Add base files for r570.144 firmware bindings
Documentation/gpu/nova/core/todo.rst | 17 -
drivers/gpu/nova-core/falcon.rs | 6 +-
drivers/gpu/nova-core/falcon/hal.rs | 2 +-
drivers/gpu/nova-core/fb.rs | 65 +++-
drivers/gpu/nova-core/firmware.rs | 107 ++++--
drivers/gpu/nova-core/firmware/booter.rs | 375 ++++++++++++++++++++++
drivers/gpu/nova-core/firmware/gsp.rs | 239 ++++++++++++++
drivers/gpu/nova-core/firmware/riscv.rs | 89 +++++
drivers/gpu/nova-core/gpu.rs | 93 ++++--
drivers/gpu/nova-core/gsp.rs | 11 +
drivers/gpu/nova-core/gsp/fw.rs | 101 ++++++
drivers/gpu/nova-core/gsp/fw/r570_144.rs | 28 ++
drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs | 126 ++++++++
drivers/gpu/nova-core/nova_core.rs | 1 +
drivers/gpu/nova-core/util.rs | 20 --
15 files changed, 1184 insertions(+), 96 deletions(-)
---
base-commit: e2580413a83680f679904ad2f2c1aa6969876469
change-id: 20250822-nova_firmware-e0ffb492ba35
prerequisite-message-id: <20250905140047.3325945-1-lossin@kernel.org>
prerequisite-patch-id: 32113c3a3ca8ccf16e2ed272303d9abbc4300ae3
prerequisite-change-id: 20250620-num-9420281c02c7:v5
prerequisite-patch-id: 50077433250cad1cf60eb8f85c78e532ac91852e
prerequisite-patch-id: 021a41cd35f09790ec383521ecc9b4c167868732
prerequisite-patch-id: a1ec5698a198d4aad45432b50d42f401e3db6452
prerequisite-patch-id: 8565b054c432bcc9a3a0d0121a934c74ef36d535
prerequisite-patch-id: 19d008deabb88beb441d2398f120ecb426fbdb43
prerequisite-patch-id: 3bc0d2be065a900d224ff8c1bc4450abfe9eb2cc
prerequisite-patch-id: 5b4eb0f71fa2ccf662594819fa79fd932f4f164f
prerequisite-patch-id: 9058ca08cd149444b5f910e4bb4494a890d1a733
prerequisite-patch-id: 8804806f7cc605feddded0804eec8b8362d7b965
prerequisite-patch-id: f999cabde51824432a1bf60817518d1ce189eb76
prerequisite-patch-id: 49e15538e142f2e7dd4f1ba0cf2fd891bd265d36
prerequisite-patch-id: 2ecf9b1e26b5203065bfac4ccf74301b3bb4fbe6
prerequisite-patch-id: 1af6ec7c2ce8503fe476985f59949dcd150ee6bf
prerequisite-patch-id: ac72e72b3affece504bff76b60b88769ff200a2f
prerequisite-patch-id: 7dc0a6da8c9727d27250cf730f8aaf6dd8b3d8c7
prerequisite-patch-id: 31a0a2469de9ac965186098072753dcc749b40fe
prerequisite-patch-id: 7e6d1fc7cf910decf481d135a19b0add38da2b2a
prerequisite-patch-id: c72ab11e9346de71eabfe0e6466636d5ab15a5ba
prerequisite-patch-id: 3f236fdea8c4b33620d0f863fea573b46ab0ded6
prerequisite-patch-id: a8ab42d0c9c3c837bb4cacb02cef585ef163a27e
prerequisite-patch-id: 930a1f26364ed67e0d6b85c96251028fda43c80a
prerequisite-patch-id: f1bc1fd46145a66235ab7475463584e1803882a3
prerequisite-patch-id: 4a2fd7bd8d13dc2feaf68e0dc681546ce2ab3e40
prerequisite-patch-id: 2da333d93c188016ad87c5ae882a4c1f669d3819
prerequisite-patch-id: dd0df8d299dc0615a88cc0019f38bc09cee31ed7
prerequisite-patch-id: 795530b48c8a232f5221846ad96696fe60f24db3
prerequisite-patch-id: 3f1cb6654d6d4281c0fac3310b156a7d3ae9c641
prerequisite-patch-id: a82ca85da78fcd6ecb33de2fbe90a029f6232e50
prerequisite-patch-id: dd4880d4228c175486a7313459a6fba6d8e1f6ed
prerequisite-patch-id: a05c9aacdcd29aa789f755f98dc8bd8588f0393a
prerequisite-patch-id: b0be3d658a177f73a0a666fc4441829445681b2a
prerequisite-patch-id: 0e1b1f9a665317ff569a37df6ff49cd1880b04f8
prerequisite-patch-id: 178b864e6d1b88ee299dcc05d1a7a4c89ec7ed51
prerequisite-patch-id: 8e2eeaa55f11f485bac082243c7d1f3b3d6efe54
prerequisite-patch-id: 62fa6de7d3ae99dc54c092087bd716e6749545fd
prerequisite-patch-id: 3d14d56ca93b0831837aa26b802100a250adeac6
prerequisite-patch-id: 7a12f4b0e7588874ce589b41b70671dc261b9468
prerequisite-patch-id: c44763ec35c4e4431e769df088b98424cbddf7df
prerequisite-patch-id: a9e008c179b1c2fbe76654a191e5018880383d49
prerequisite-patch-id: 1e9ce500ce25188c575be608cd39e15a59836f83
prerequisite-patch-id: 39ca3a210a6c365434924c07a0c98a074eb73b97
prerequisite-patch-id: a747e05834cdb8b8f727e1f7c8b110c636cadab8
prerequisite-patch-id: 24833689bdecd3fc7a604e13bfe203ccd2fca6f0
prerequisite-patch-id: 107d1766d92729e84241f359d4763adb380fb566
prerequisite-patch-id: ac3060c99744a78b608b865d344ef2ef4d929071
prerequisite-patch-id: 1739e6a78e50414134dafb772ca76b7db40900f1
Best regards,
--
Alexandre Courbot <acourbot@nvidia.com>We want to store the GSP and SEC2 falcon instances inside the `Gpu`
structure, but doing so require these types to implement `Send` for
`pci::Driver` to remain implementable on `NovaCore`, which embeds `Gpu`.
All implementors of `FalconEngine` and `FalconHal` satisfy the
requirements of `Send`, and this traits also already required `Sync`, so
this a minor tweak.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/falcon.rs | 2 +-
drivers/gpu/nova-core/falcon/hal.rs | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs
index 2dbcdf26697beb7e52083675fc9ea62a6167fef8..b16207e7242fe1ac26b8552575b8b4e52f34cf6a 100644
--- a/drivers/gpu/nova-core/falcon.rs
+++ b/drivers/gpu/nova-core/falcon.rs
@@ -286,7 +286,7 @@ fn from(value: bool) -> Self {
/// Each engine provides one base for `PFALCON` and `PFALCON2` registers. The `ID` constant is used
/// to identify a given Falcon instance with register I/O methods.
pub(crate) trait FalconEngine:
- Sync + RegisterBase<PFalconBase> + RegisterBase<PFalcon2Base> + Sized
+ Send + Sync + RegisterBase<PFalconBase> + RegisterBase<PFalcon2Base> + Sized
{
/// Singleton of the engine, used to identify it with register I/O methods.
const ID: Self;
diff --git a/drivers/gpu/nova-core/falcon/hal.rs b/drivers/gpu/nova-core/falcon/hal.rs
index b233bc365882f9add9b6eab33b8d462d7913df37..bba28845561795914e9a4dba277d72bbac0b37dd 100644
--- a/drivers/gpu/nova-core/falcon/hal.rs
+++ b/drivers/gpu/nova-core/falcon/hal.rs
@@ -13,7 +13,7 @@
/// Implements chipset-specific low-level operations. The trait is generic against [`FalconEngine`]
/// so its `BASE` parameter can be used in order to avoid runtime bound checks when accessing
/// registers.
-pub(crate) trait FalconHal<E: FalconEngine>: Sync {
+pub(crate) trait FalconHal<E: FalconEngine>: Send + Sync {
/// Activates the Falcon core if the engine is a risvc/falcon dual engine.
fn select_core(&self, _falcon: &Falcon<E>, _bar: &Bar0) -> Result {
Ok(())
--
2.51.0Right now the GSP boot code is very incomplete and limited to running
FRTS, so having it in `Gpu::new` is not a big constraint.
However, this will change as we add more steps of the GSP boot process,
and not all GPU families follow the same procedure, so having these
steps in a dedicated method is the logical construct.
Relatedly, booting the GSP typically happens only once in the GPU reset
cycle. Most of the data created to complete this step (notably firmware
loaded from user-space) is needed only temporarily and can be discarded
once the GSP is booted; it then makes all the more sense to store these
as local variables of a dedicated method , instead of inside the `Gpu`
structure where they as kept as long as the GPU is bound, using dozens
of megabytes of host memory.
Thus, introduce a `start_gsp` static method on the `Gpu` struct, which
is called by `Gpu::new` to initialize the GSP and obtain its runtime
data. The GSP runtime data is currently an empty placeholder, but this
will change in a subsequent patch.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/gpu.rs | 47 +++++++++++++++++++++++++++++++++-----------
1 file changed, 36 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index a0878ecdc18bc9e9d975b9ab9c85dd7ab9c3d995..cb991c7faef5523459367f3b9a7fd9cc29671b98 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -172,18 +172,18 @@ pub(crate) struct Gpu {
/// System memory page required for flushing all pending GPU-side memory writes done through
/// PCIE into system memory, via sysmembar (A GPU-initiated HW memory-barrier operation).
sysmem_flush: SysmemFlush,
+ gsp_falcon: Falcon<Gsp>,
+ sec2_falcon: Falcon<Sec2>,
+ gsp: (),
}
impl Gpu {
/// Helper function to load and run the FWSEC-FRTS firmware and confirm that it has properly
/// created the WPR2 region.
- ///
- /// TODO: this needs to be moved into a larger type responsible for booting the whole GSP
- /// (`GspBooter`?).
fn run_fwsec_frts(
dev: &device::Device<device::Bound>,
- falcon: &Falcon<Gsp>,
bar: &Bar0,
+ falcon: &Falcon<Gsp>,
bios: &Vbios,
fb_layout: &FbLayout,
) -> Result<()> {
@@ -254,6 +254,32 @@ fn run_fwsec_frts(
}
}
+ /// Attempt to start the GSP.
+ ///
+ /// This is a GPU-dependent and complex procedure that involves loading firmware files from
+ /// user-space, patching them with signatures, and building firmware-specific intricate data
+ /// structures that the GSP will use at runtime.
+ ///
+ /// Upon return, the GSP is up and running, and its runtime object given as return value.
+ pub(crate) fn start_gsp(
+ pdev: &pci::Device<device::Bound>,
+ bar: &Bar0,
+ chipset: Chipset,
+ gsp_falcon: &Falcon<Gsp>,
+ _sec2_falcon: &Falcon<Sec2>,
+ ) -> Result<()> {
+ let dev = pdev.as_ref();
+
+ let bios = Vbios::new(dev, bar)?;
+
+ let fb_layout = FbLayout::new(chipset, bar)?;
+ dev_dbg!(dev, "{:#x?}\n", fb_layout);
+
+ Self::run_fwsec_frts(dev, bar, gsp_falcon, &bios, &fb_layout)?;
+
+ Ok(())
+ }
+
pub(crate) fn new(
pdev: &pci::Device<device::Bound>,
devres_bar: Arc<Devres<Bar0>>,
@@ -284,20 +310,19 @@ pub(crate) fn new(
)?;
gsp_falcon.clear_swgen0_intr(bar);
- let _sec2_falcon = Falcon::<Sec2>::new(pdev.as_ref(), spec.chipset, bar, true)?;
+ let sec2_falcon = Falcon::<Sec2>::new(pdev.as_ref(), spec.chipset, bar, true)?;
- let fb_layout = FbLayout::new(spec.chipset, bar)?;
- dev_dbg!(pdev.as_ref(), "{:#x?}\n", fb_layout);
-
- let bios = Vbios::new(pdev.as_ref(), bar)?;
-
- Self::run_fwsec_frts(pdev.as_ref(), &gsp_falcon, bar, &bios, &fb_layout)?;
+ #[allow(clippy::let_unit_value)]
+ let gsp = Self::start_gsp(pdev, bar, spec.chipset, &gsp_falcon, &sec2_falcon)?;
Ok(pin_init!(Self {
spec,
bar: devres_bar,
fw,
sysmem_flush,
+ gsp_falcon,
+ sec2_falcon,
+ gsp,
}))
}
--
2.51.0There are a few cases where we need the lowercase name of a given
chipset, notably to resolve firmware files paths for dynamic loading or
to build the module information.
So far, we relied on a static `NAMES` array for the latter, and some
CString hackery for the former.
Replace both with a new `name` const method that returns the lowercase
name of a chipset instance. We can generate it using the `paste!` macro.
Using this method removes the need to create a `CString` when loading
firmware, and lets us remove a couple of utility functions that now have
no user.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/firmware.rs | 8 +++-----
drivers/gpu/nova-core/gpu.rs | 25 +++++++++++++++++--------
drivers/gpu/nova-core/util.rs | 20 --------------------
3 files changed, 20 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index 2931912ddba0ea1fe6d027ccec70b39cdb40344a..213d4506a53f83e7474861f6f81f033a9760fb61 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -30,9 +30,7 @@ pub(crate) struct Firmware {
impl Firmware {
pub(crate) fn new(dev: &device::Device, chipset: Chipset, ver: &str) -> Result<Firmware> {
- let mut chip_name = CString::try_from_fmt(fmt!("{chipset}"))?;
- chip_name.make_ascii_lowercase();
- let chip_name = &*chip_name;
+ let chip_name = chipset.name();
let request = |name_| {
CString::try_from_fmt(fmt!("nvidia/{chip_name}/gsp/{name_}-{ver}.bin"))
@@ -180,8 +178,8 @@ pub(crate) const fn create(
let mut this = Self(firmware::ModInfoBuilder::new(module_name));
let mut i = 0;
- while i < gpu::Chipset::NAMES.len() {
- this = this.make_entry_chipset(gpu::Chipset::NAMES[i]);
+ while i < gpu::Chipset::ALL.len() {
+ this = this.make_entry_chipset(gpu::Chipset::ALL[i].name());
i += 1;
}
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index cb991c7faef5523459367f3b9a7fd9cc29671b98..444beda52a4166e7052e980231dd870237354c3a 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -10,7 +10,6 @@
use crate::firmware::{Firmware, FIRMWARE_VERSION};
use crate::gfw;
use crate::regs;
-use crate::util;
use crate::vbios::Vbios;
use core::fmt;
@@ -28,13 +27,23 @@ impl Chipset {
$( Chipset::$variant, )*
];
- pub(crate) const NAMES: [&'static str; Self::ALL.len()] = [
- $( util::const_bytes_to_str(
- util::to_lowercase_bytes::<{ stringify!($variant).len() }>(
- stringify!($variant)
- ).as_slice()
- ), )*
- ];
+ ::kernel::macros::paste!(
+ /// Returns the name of this chipset, in lowercase.
+ ///
+ /// # Examples
+ ///
+ /// ```
+ /// let chipset = Chipset::GA102;
+ /// assert_eq!(chipset.name(), "ga102");
+ /// ```
+ pub(crate) const fn name(&self) -> &'static str {
+ match *self {
+ $(
+ Chipset::$variant => stringify!([<$variant:lower>]),
+ )*
+ }
+ }
+ );
}
// TODO[FPRI]: replace with something like derive(FromPrimitive)
diff --git a/drivers/gpu/nova-core/util.rs b/drivers/gpu/nova-core/util.rs
index 76cedf3710d7bb248f62ed50381a70f8ffb3f19a..bf35f00cb732ee4fa6644854718a0ad99051666a 100644
--- a/drivers/gpu/nova-core/util.rs
+++ b/drivers/gpu/nova-core/util.rs
@@ -3,26 +3,6 @@
use kernel::prelude::*;
use kernel::time::{Delta, Instant, Monotonic};
-pub(crate) const fn to_lowercase_bytes<const N: usize>(s: &str) -> [u8; N] {
- let src = s.as_bytes();
- let mut dst = [0; N];
- let mut i = 0;
-
- while i < src.len() && i < N {
- dst[i] = (src[i] as char).to_ascii_lowercase() as u8;
- i += 1;
- }
-
- dst
-}
-
-pub(crate) const fn const_bytes_to_str(bytes: &[u8]) -> &str {
- match core::str::from_utf8(bytes) {
- Ok(string) => string,
- Err(_) => kernel::build_error!("Bytes are not valid UTF-8."),
- }
-}
-
/// Wait until `cond` is true or `timeout` elapsed.
///
/// When `cond` evaluates to `Some`, its return value is returned.
--
2.51.0When all the firmware files are loaded from `Firmware::new`, it makes
sense to have the firmware request code into a closure. However, as we
eventually want each individual firmware constructor to request its own
file (and get rid of `Firmware` altogether), move this code into a
dedicated function that can be called by individual firmware types.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/firmware.rs | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index 213d4506a53f83e7474861f6f81f033a9760fb61..4e8654d294a2205ac6f0b05b6da8d959a415ced1 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -19,6 +19,19 @@
pub(crate) const FIRMWARE_VERSION: &str = "535.113.01";
+/// Requests the GPU firmware `name` suitable for `chipset`, with version `ver`.
+fn request_nv_firmware(
+ dev: &device::Device,
+ chipset: gpu::Chipset,
+ name: &str,
+ ver: &str,
+) -> Result<firmware::Firmware> {
+ let chip_name = chipset.name();
+
+ CString::try_from_fmt(fmt!("nvidia/{chip_name}/gsp/{name}-{ver}.bin"))
+ .and_then(|path| firmware::Firmware::request(&path, dev))
+}
+
/// Structure encapsulating the firmware blobs required for the GPU to operate.
#[expect(dead_code)]
pub(crate) struct Firmware {
@@ -30,12 +43,7 @@ pub(crate) struct Firmware {
impl Firmware {
pub(crate) fn new(dev: &device::Device, chipset: Chipset, ver: &str) -> Result<Firmware> {
- let chip_name = chipset.name();
-
- let request = |name_| {
- CString::try_from_fmt(fmt!("nvidia/{chip_name}/gsp/{name_}-{ver}.bin"))
- .and_then(|path| firmware::Firmware::request(&path, dev))
- };
+ let request = |name| request_nv_firmware(dev, chipset, name, ver);
Ok(Firmware {
booter_load: request("booter_load")?,
--
2.51.0Several firmware files loaded from userspace feature a common header
that describes their payload. Add basic support for it so subsequent
patches can leverage it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/firmware.rs | 62 +++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index 4e8654d294a2205ac6f0b05b6da8d959a415ced1..32b685c8757b1106084577c2cc7d5ef6056c1c64 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -4,11 +4,13 @@
//! to be loaded into a given execution unit.
use core::marker::PhantomData;
+use core::mem::size_of;
use kernel::device;
use kernel::firmware;
use kernel::prelude::*;
use kernel::str::CString;
+use kernel::transmute::FromBytes;
use crate::dma::DmaObject;
use crate::falcon::FalconFirmware;
@@ -156,6 +158,66 @@ fn no_patch_signature(self) -> FirmwareDmaObject<F, Signed> {
}
}
+/// Header common to most firmware files.
+#[repr(C)]
+#[derive(Debug, Clone)]
+struct BinHdr {
+ /// Magic number, must be `0x10de`.
+ bin_magic: u32,
+ /// Version of the header.
+ bin_ver: u32,
+ /// Size in bytes of the binary (to be ignored).
+ bin_size: u32,
+ /// Offset of the start of the application-specific header.
+ header_offset: u32,
+ /// Offset of the start of the data payload.
+ data_offset: u32,
+ /// Size in bytes of the data payload.
+ data_size: u32,
+}
+
+// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+unsafe impl FromBytes for BinHdr {}
+
+// A firmware blob starting with a `BinHdr`.
+struct BinFirmware<'a> {
+ hdr: BinHdr,
+ fw: &'a [u8],
+}
+
+#[expect(dead_code)]
+impl<'a> BinFirmware<'a> {
+ /// Interpret `fw` as a firmware image starting with a [`BinHdr`], and returns the
+ /// corresponding [`BinFirmware`] that can be used to extract its payload.
+ fn new(fw: &'a firmware::Firmware) -> Result<Self> {
+ const BIN_MAGIC: u32 = 0x10de;
+ let fw = fw.data();
+
+ fw.get(0..size_of::<BinHdr>())
+ // Extract header.
+ .and_then(BinHdr::from_bytes_copy)
+ // Validate header.
+ .and_then(|hdr| {
+ if hdr.bin_magic == BIN_MAGIC {
+ Some(hdr)
+ } else {
+ None
+ }
+ })
+ .map(|hdr| Self { hdr, fw })
+ .ok_or(EINVAL)
+ }
+
+ /// Returns the data payload of the firmware, or `None` if the data range is out of bounds of
+ /// the firmware image.
+ fn data(&self) -> Option<&[u8]> {
+ let fw_start = self.hdr.data_offset as usize;
+ let fw_size = self.hdr.data_size as usize;
+
+ self.fw.get(fw_start..fw_start + fw_size)
+ }
+}
+
pub(crate) struct ModInfoBuilder<const N: usize>(firmware::ModInfoBuilder<N>);
impl<const N: usize> ModInfoBuilder<N> {
--
2.51.0The Booter signed firmware is an essential part of bringing up the GSP
on Turing and Ampere. It is loaded on the sec2 falcon core and is
responsible for loading and running the RISC-V GSP bootloader into the
GSP core.
Add support for parsing the Booter firmware loaded from userspace, patch
its signatures, and store it into a form that is ready to be loaded and
executed on the sec2 falcon.
Then, move the Booter instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
We do not run Booter yet, as its own payload (the GSP bootloader and
firmware image) still need to be prepared.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/falcon.rs | 4 +-
drivers/gpu/nova-core/firmware.rs | 6 +-
drivers/gpu/nova-core/firmware/booter.rs | 375 +++++++++++++++++++++++++++++++
drivers/gpu/nova-core/gpu.rs | 12 +-
4 files changed, 389 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs
index b16207e7242fe1ac26b8552575b8b4e52f34cf6a..37e6298195e49a9a29e81226abe16cd410c9adbc 100644
--- a/drivers/gpu/nova-core/falcon.rs
+++ b/drivers/gpu/nova-core/falcon.rs
@@ -293,7 +293,7 @@ pub(crate) trait FalconEngine:
}
/// Represents a portion of the firmware to be loaded into a particular memory (e.g. IMEM or DMEM).
-#[derive(Debug)]
+#[derive(Debug, Clone)]
pub(crate) struct FalconLoadTarget {
/// Offset from the start of the source object to copy from.
pub(crate) src_start: u32,
@@ -304,7 +304,7 @@ pub(crate) struct FalconLoadTarget {
}
/// Parameters for the falcon boot ROM.
-#[derive(Debug)]
+#[derive(Debug, Clone)]
pub(crate) struct FalconBromParams {
/// Offset in `DMEM`` of the firmware's signature.
pub(crate) pkc_data_offset: u32,
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index 32b685c8757b1106084577c2cc7d5ef6056c1c64..d954b1e98fda82c44f87d2103e31fa717c392d79 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -17,6 +17,7 @@
use crate::gpu;
use crate::gpu::Chipset;
+pub(crate) mod booter;
pub(crate) mod fwsec;
pub(crate) const FIRMWARE_VERSION: &str = "535.113.01";
@@ -37,8 +38,6 @@ fn request_nv_firmware(
/// Structure encapsulating the firmware blobs required for the GPU to operate.
#[expect(dead_code)]
pub(crate) struct Firmware {
- booter_load: firmware::Firmware,
- booter_unload: firmware::Firmware,
bootloader: firmware::Firmware,
gsp: firmware::Firmware,
}
@@ -48,8 +47,6 @@ pub(crate) fn new(dev: &device::Device, chipset: Chipset, ver: &str) -> Result<F
let request = |name| request_nv_firmware(dev, chipset, name, ver);
Ok(Firmware {
- booter_load: request("booter_load")?,
- booter_unload: request("booter_unload")?,
bootloader: request("bootloader")?,
gsp: request("gsp")?,
})
@@ -185,7 +182,6 @@ struct BinFirmware<'a> {
fw: &'a [u8],
}
-#[expect(dead_code)]
impl<'a> BinFirmware<'a> {
/// Interpret `fw` as a firmware image starting with a [`BinHdr`], and returns the
/// corresponding [`BinFirmware`] that can be used to extract its payload.
diff --git a/drivers/gpu/nova-core/firmware/booter.rs b/drivers/gpu/nova-core/firmware/booter.rs
new file mode 100644
index 0000000000000000000000000000000000000000..a4cd9c84bea75b68565778841e78a20cdec9333e
--- /dev/null
+++ b/drivers/gpu/nova-core/firmware/booter.rs
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Support for loading and patching the `Booter` firmware. `Booter` is a Heavy Secured firmware
+//! running on [`Sec2`], that is used on Turing/Ampere to load the GSP firmware into the GSP falcon
+//! (and optionally unload it through a separate firmware image).
+
+use core::marker::PhantomData;
+use core::mem::size_of;
+use core::ops::Deref;
+
+use kernel::device;
+use kernel::prelude::*;
+use kernel::transmute::FromBytes;
+
+use crate::dma::DmaObject;
+use crate::driver::Bar0;
+use crate::falcon::sec2::Sec2;
+use crate::falcon::{Falcon, FalconBromParams, FalconFirmware, FalconLoadParams, FalconLoadTarget};
+use crate::firmware::{BinFirmware, FirmwareDmaObject, FirmwareSignature, Signed, Unsigned};
+use crate::gpu::Chipset;
+
+/// Local convenience function to return a copy of `S` by reinterpreting the bytes starting at
+/// `offset` in `slice`.
+fn frombytes_at<S: FromBytes + Sized>(slice: &[u8], offset: usize) -> Result<S> {
+ slice
+ .get(offset..offset + size_of::<S>())
+ .and_then(S::from_bytes_copy)
+ .ok_or(EINVAL)
+}
+
+/// Heavy-Secured firmware header.
+///
+/// Such firmwares have an application-specific payload that needs to be patched with a given
+/// signature.
+#[repr(C)]
+#[derive(Debug, Clone)]
+struct HsHeaderV2 {
+ /// Offset to the start of the signatures.
+ sig_prod_offset: u32,
+ /// Size in bytes of the signatures.
+ sig_prod_size: u32,
+ /// Offset to a `u32` containing the location at which to patch the signature in the microcode
+ /// image.
+ patch_loc_offset: u32,
+ /// Offset to a `u32` containing the index of the signature to patch.
+ patch_sig_offset: u32,
+ /// Start offset to the signature metadata.
+ meta_data_offset: u32,
+ /// Size in bytes of the signature metadata.
+ meta_data_size: u32,
+ /// Offset to a `u32` containing the number of signatures in the signatures section.
+ num_sig_offset: u32,
+ /// Offset of the application-specific header.
+ header_offset: u32,
+ /// Size in bytes of the application-specific header.
+ header_size: u32,
+}
+
+// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+unsafe impl FromBytes for HsHeaderV2 {}
+
+/// Heavy-Secured Firmware image container.
+///
+/// This provides convenient access to the fields of [`HsHeaderV2`] that are actually indices to
+/// read from in the firmware data.
+struct HsFirmwareV2<'a> {
+ hdr: HsHeaderV2,
+ fw: &'a [u8],
+}
+
+impl<'a> HsFirmwareV2<'a> {
+ /// Interprets the header of `bin_fw` as a [`HsHeaderV2`] and returns an instance of
+ /// `HsFirmwareV2` for further parsing.
+ ///
+ /// Fails if the header pointed at by `bin_fw` is not within the bounds of the firmware image.
+ fn new(bin_fw: &BinFirmware<'a>) -> Result<Self> {
+ frombytes_at::<HsHeaderV2>(bin_fw.fw, bin_fw.hdr.header_offset as usize)
+ .map(|hdr| Self { hdr, fw: bin_fw.fw })
+ }
+
+ /// Returns the location at which the signatures should be patched in the microcode image.
+ ///
+ /// Fails if the offset of the patch location is outside the bounds of the firmware
+ /// image.
+ fn patch_location(&self) -> Result<u32> {
+ frombytes_at::<u32>(self.fw, self.hdr.patch_loc_offset as usize)
+ }
+
+ /// Returns an iterator to the signatures of the firmware. The iterator can be empty if the
+ /// firmware is unsigned.
+ ///
+ /// Fails if the pointed signatures are outside the bounds of the firmware image.
+ fn signatures_iter(&'a self) -> Result<impl Iterator<Item = BooterSignature<'a>>> {
+ let num_sig = frombytes_at::<u32>(self.fw, self.hdr.num_sig_offset as usize)?;
+ let iter = match self.hdr.sig_prod_size.checked_div(num_sig) {
+ // If there are no signatures, return an iterator that will yield zero elements.
+ None => (&[] as &[u8]).chunks_exact(1),
+ Some(sig_size) => {
+ let patch_sig = frombytes_at::<u32>(self.fw, self.hdr.patch_sig_offset as usize)?;
+ let signatures_start = (self.hdr.sig_prod_offset + patch_sig) as usize;
+
+ self.fw
+ // Get signatures range.
+ .get(signatures_start..signatures_start + self.hdr.sig_prod_size as usize)
+ .ok_or(EINVAL)?
+ .chunks_exact(sig_size as usize)
+ }
+ };
+
+ // Map the byte slices into signatures.
+ Ok(iter.map(BooterSignature))
+ }
+}
+
+/// Signature parameters, as defined in the firmware.
+#[repr(C)]
+struct HsSignatureParams {
+ /// Fuse version to use.
+ fuse_ver: u32,
+ /// Mask of engine IDs this firmware applies to.
+ engine_id_mask: u32,
+ /// ID of the microcode.
+ ucode_id: u32,
+}
+
+// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+unsafe impl FromBytes for HsSignatureParams {}
+
+impl HsSignatureParams {
+ /// Returns the signature parameters contained in `hs_fw`.
+ ///
+ /// Fails if the meta data parameter of `hs_fw` is outside the bounds of the firmware image, or
+ /// if its size doesn't match that of [`HsSignatureParams`].
+ fn new(hs_fw: &HsFirmwareV2<'_>) -> Result<Self> {
+ let start = hs_fw.hdr.meta_data_offset as usize;
+ let end = start
+ .checked_add(hs_fw.hdr.meta_data_size as usize)
+ .ok_or(EINVAL)?;
+
+ hs_fw
+ .fw
+ .get(start..end)
+ .and_then(Self::from_bytes_copy)
+ .ok_or(EINVAL)
+ }
+}
+
+/// Header for code and data load offsets.
+#[repr(C)]
+#[derive(Debug, Clone)]
+struct HsLoadHeaderV2 {
+ // Offset at which the code starts.
+ os_code_offset: u32,
+ // Total size of the code, for all apps.
+ os_code_size: u32,
+ // Offset at which the data starts.
+ os_data_offset: u32,
+ // Size of the data.
+ os_data_size: u32,
+ // Number of apps following this header. Each app is described by a [`HsLoadHeaderV2App`].
+ num_apps: u32,
+}
+
+// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+unsafe impl FromBytes for HsLoadHeaderV2 {}
+
+impl HsLoadHeaderV2 {
+ /// Returns the load header contained in `hs_fw`.
+ ///
+ /// Fails if the header pointed at by `hs_fw` is not within the bounds of the firmware image.
+ fn new(hs_fw: &HsFirmwareV2<'_>) -> Result<Self> {
+ frombytes_at::<Self>(hs_fw.fw, hs_fw.hdr.header_offset as usize)
+ }
+}
+
+/// Header for app code loader.
+#[repr(C)]
+#[derive(Debug, Clone)]
+struct HsLoadHeaderV2App {
+ /// Offset at which to load the app code.
+ offset: u32,
+ /// Length in bytes of the app code.
+ len: u32,
+}
+
+// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+unsafe impl FromBytes for HsLoadHeaderV2App {}
+
+impl HsLoadHeaderV2App {
+ /// Returns the [`HsLoadHeaderV2App`] for app `idx` of `hs_fw`.
+ ///
+ /// Fails if `idx` is larger than the number of apps declared in `hs_fw`, or if the header is
+ /// not within the bounds of the firmware image.
+ fn new(hs_fw: &HsFirmwareV2<'_>, idx: u32) -> Result<Self> {
+ let load_hdr = HsLoadHeaderV2::new(hs_fw)?;
+ if idx >= load_hdr.num_apps {
+ Err(EINVAL)
+ } else {
+ frombytes_at::<Self>(
+ hs_fw.fw,
+ (hs_fw.hdr.header_offset as usize)
+ // Skip the load header...
+ .checked_add(size_of::<HsLoadHeaderV2>())
+ // ... and jump to app header `idx`.
+ .and_then(|offset| {
+ offset.checked_add((idx as usize).checked_mul(size_of::<Self>())?)
+ })
+ .ok_or(EINVAL)?,
+ )
+ }
+ }
+}
+
+/// Signature for Booter firmware. Their size is encoded into the header and not known a compile
+/// time, so we just wrap a byte slices on which we can implement [`FirmwareSignature`].
+struct BooterSignature<'a>(&'a [u8]);
+
+impl<'a> AsRef<[u8]> for BooterSignature<'a> {
+ fn as_ref(&self) -> &[u8] {
+ self.0
+ }
+}
+
+impl<'a> FirmwareSignature<BooterFirmware> for BooterSignature<'a> {}
+
+/// The `Booter` loader firmware, responsible for loading the GSP.
+pub(crate) struct BooterFirmware {
+ // Load parameters for `IMEM` falcon memory.
+ imem_load_target: FalconLoadTarget,
+ // Load parameters for `DMEM` falcon memory.
+ dmem_load_target: FalconLoadTarget,
+ // BROM falcon parameters.
+ brom_params: FalconBromParams,
+ // Device-mapped firmware image.
+ ucode: FirmwareDmaObject<Self, Signed>,
+}
+
+impl FirmwareDmaObject<BooterFirmware, Unsigned> {
+ fn new_booter(dev: &device::Device<device::Bound>, data: &[u8]) -> Result<Self> {
+ DmaObject::from_data(dev, data).map(|ucode| Self(ucode, PhantomData))
+ }
+}
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub(crate) enum BooterKind {
+ Loader,
+ #[expect(unused)]
+ Unloader,
+}
+
+impl BooterFirmware {
+ /// Parses the Booter firmware contained in `fw`, and patches the correct signature so it is
+ /// ready to be loaded and run on `falcon`.
+ pub(crate) fn new(
+ dev: &device::Device<device::Bound>,
+ kind: BooterKind,
+ chipset: Chipset,
+ ver: &str,
+ falcon: &Falcon<<Self as FalconFirmware>::Target>,
+ bar: &Bar0,
+ ) -> Result<Self> {
+ let fw_name = match kind {
+ BooterKind::Loader => "booter_load",
+ BooterKind::Unloader => "booter_unload",
+ };
+ let fw = super::request_nv_firmware(dev, chipset, fw_name, ver)?;
+ let bin_fw = BinFirmware::new(&fw)?;
+
+ // The binary firmware embeds a Heavy-Secured firmware.
+ let hs_fw = HsFirmwareV2::new(&bin_fw)?;
+
+ // The Heavy-Secured firmware embeds a firmware load descriptor.
+ let load_hdr = HsLoadHeaderV2::new(&hs_fw)?;
+
+ // Offset in `ucode` where to patch the signature.
+ let patch_loc = hs_fw.patch_location()?;
+
+ let sig_params = HsSignatureParams::new(&hs_fw)?;
+ let brom_params = FalconBromParams {
+ // `load_hdr.os_data_offset` is an absolute index, but `pkc_data_offset` is from the
+ // signature patch location.
+ pkc_data_offset: patch_loc
+ .checked_sub(load_hdr.os_data_offset)
+ .ok_or(EINVAL)?,
+ engine_id_mask: u16::try_from(sig_params.engine_id_mask).map_err(|_| EINVAL)?,
+ ucode_id: u8::try_from(sig_params.ucode_id).map_err(|_| EINVAL)?,
+ };
+ let app0 = HsLoadHeaderV2App::new(&hs_fw, 0)?;
+
+ // Object containing the firmware microcode to be signature-patched.
+ let ucode = bin_fw
+ .data()
+ .ok_or(EINVAL)
+ .and_then(|data| FirmwareDmaObject::<Self, _>::new_booter(dev, data))?;
+
+ let ucode_signed = {
+ let mut signatures = hs_fw.signatures_iter()?.peekable();
+
+ if signatures.peek().is_none() {
+ // If there are no signatures, then the firmware is unsigned.
+ ucode.no_patch_signature()
+ } else {
+ // Obtain the version from the fuse register, and extract the corresponding
+ // signature.
+ let reg_fuse_version = falcon.signature_reg_fuse_version(
+ bar,
+ brom_params.engine_id_mask,
+ brom_params.ucode_id,
+ )?;
+
+ // `0` means the last signature should be used.
+ const FUSE_VERSION_USE_LAST_SIG: u32 = 0;
+ let signature = match reg_fuse_version {
+ FUSE_VERSION_USE_LAST_SIG => signatures.last(),
+ // Otherwise hardware fuse version needs to be subtracted to obtain the index.
+ reg_fuse_version => {
+ let Some(idx) = sig_params.fuse_ver.checked_sub(reg_fuse_version) else {
+ dev_err!(dev, "invalid fuse version for Booter firmware\n");
+ return Err(EINVAL);
+ };
+ signatures.nth(idx as usize)
+ }
+ }
+ .ok_or(EINVAL)?;
+
+ ucode.patch_signature(&signature, patch_loc as usize)?
+ }
+ };
+
+ Ok(Self {
+ imem_load_target: FalconLoadTarget {
+ src_start: app0.offset,
+ dst_start: 0,
+ len: app0.len,
+ },
+ dmem_load_target: FalconLoadTarget {
+ src_start: load_hdr.os_data_offset,
+ dst_start: 0,
+ len: load_hdr.os_data_size,
+ },
+ brom_params,
+ ucode: ucode_signed,
+ })
+ }
+}
+
+impl FalconLoadParams for BooterFirmware {
+ fn imem_load_params(&self) -> FalconLoadTarget {
+ self.imem_load_target.clone()
+ }
+
+ fn dmem_load_params(&self) -> FalconLoadTarget {
+ self.dmem_load_target.clone()
+ }
+
+ fn brom_params(&self) -> FalconBromParams {
+ self.brom_params.clone()
+ }
+
+ fn boot_addr(&self) -> u32 {
+ self.imem_load_target.src_start
+ }
+}
+
+impl Deref for BooterFirmware {
+ type Target = DmaObject;
+
+ fn deref(&self) -> &Self::Target {
+ &self.ucode.0
+ }
+}
+
+impl FalconFirmware for BooterFirmware {
+ type Target = Sec2;
+}
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 444beda52a4166e7052e980231dd870237354c3a..53fadbeea7b611712ca343af71bcdc01f1005673 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -6,6 +6,7 @@
use crate::falcon::{gsp::Gsp, sec2::Sec2, Falcon};
use crate::fb::FbLayout;
use crate::fb::SysmemFlush;
+use crate::firmware::booter::{BooterFirmware, BooterKind};
use crate::firmware::fwsec::{FwsecCommand, FwsecFirmware};
use crate::firmware::{Firmware, FIRMWARE_VERSION};
use crate::gfw;
@@ -275,7 +276,7 @@ pub(crate) fn start_gsp(
bar: &Bar0,
chipset: Chipset,
gsp_falcon: &Falcon<Gsp>,
- _sec2_falcon: &Falcon<Sec2>,
+ sec2_falcon: &Falcon<Sec2>,
) -> Result<()> {
let dev = pdev.as_ref();
@@ -286,6 +287,15 @@ pub(crate) fn start_gsp(
Self::run_fwsec_frts(dev, bar, gsp_falcon, &bios, &fb_layout)?;
+ let _booter_loader = BooterFirmware::new(
+ dev,
+ BooterKind::Loader,
+ chipset,
+ FIRMWARE_VERSION,
+ sec2_falcon,
+ bar,
+ )?;
+
Ok(())
}
--
2.51.0The GSP firmware is a binary blob that is verified, loaded, and run by
the GSP bootloader. Its presentation is a bit peculiar as the GSP
bootloader expects to be given a DMA address to a 3-levels page table
mapping the GSP firmware at address 0 of its own address space.
Prepare such a structure containing the DMA-mapped firmware as well as
the DMA-mapped page tables, and a way to obtain the DMA handle of the
level 0 page table.
Then, move the GSP firmware instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
As we are performing the required ELF section parsing and radix3 page
table building, remove these items from the TODO file.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
Documentation/gpu/nova/core/todo.rst | 17 ---
drivers/gpu/nova-core/firmware.rs | 3 +-
drivers/gpu/nova-core/firmware/gsp.rs | 232 ++++++++++++++++++++++++++++++++++
drivers/gpu/nova-core/gpu.rs | 6 +
drivers/gpu/nova-core/gsp.rs | 4 +
drivers/gpu/nova-core/nova_core.rs | 1 +
6 files changed, 244 insertions(+), 19 deletions(-)
diff --git a/Documentation/gpu/nova/core/todo.rst b/Documentation/gpu/nova/core/todo.rst
index 89431fec9041b1f35cc55799c91f48dc6bc918eb..0972cb905f7ae64dfbaef4808276757319009e9c 100644
--- a/Documentation/gpu/nova/core/todo.rst
+++ b/Documentation/gpu/nova/core/todo.rst
@@ -229,23 +229,6 @@ Rust abstraction for debugfs APIs.
GPU (general)
=============
-Parse firmware headers
-----------------------
-
-Parse ELF headers from the firmware files loaded from the filesystem.
-
-| Reference: ELF utils
-| Complexity: Beginner
-| Contact: Abdiel Janulgue
-
-Build radix3 page table
------------------------
-
-Build the radix3 page table to map the firmware.
-
-| Complexity: Intermediate
-| Contact: Abdiel Janulgue
-
Initial Devinit support
-----------------------
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index d954b1e98fda82c44f87d2103e31fa717c392d79..cef910a7c2dc360139fafc2a01a050a9df40e45f 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -19,6 +19,7 @@
pub(crate) mod booter;
pub(crate) mod fwsec;
+pub(crate) mod gsp;
pub(crate) const FIRMWARE_VERSION: &str = "535.113.01";
@@ -39,7 +40,6 @@ fn request_nv_firmware(
#[expect(dead_code)]
pub(crate) struct Firmware {
bootloader: firmware::Firmware,
- gsp: firmware::Firmware,
}
impl Firmware {
@@ -48,7 +48,6 @@ pub(crate) fn new(dev: &device::Device, chipset: Chipset, ver: &str) -> Result<F
Ok(Firmware {
bootloader: request("bootloader")?,
- gsp: request("gsp")?,
})
}
}
diff --git a/drivers/gpu/nova-core/firmware/gsp.rs b/drivers/gpu/nova-core/firmware/gsp.rs
new file mode 100644
index 0000000000000000000000000000000000000000..9242e8ef6a0183cbfe5e75a3d6552ff528a2cedc
--- /dev/null
+++ b/drivers/gpu/nova-core/firmware/gsp.rs
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+
+use kernel::device;
+use kernel::dma::{DataDirection, DmaAddress};
+use kernel::kvec;
+use kernel::prelude::*;
+use kernel::scatterlist::{Owned, SGTable};
+
+use crate::dma::DmaObject;
+use crate::gpu::{Architecture, Chipset};
+use crate::gsp::GSP_PAGE_SIZE;
+
+/// Ad-hoc and temporary module to extract sections from ELF images.
+///
+/// Some firmware images are currently packaged as ELF files, where sections names are used as keys
+/// to specific and related bits of data. Future firmware versions are scheduled to move away from
+/// that scheme before nova-core becomes stable, which means this module will eventually be
+/// removed.
+mod elf {
+ use kernel::bindings;
+ use kernel::str::CStr;
+ use kernel::transmute::FromBytes;
+
+ /// Newtype to provide a [`FromBytes`] implementation.
+ #[repr(transparent)]
+ struct Elf64Hdr(bindings::elf64_hdr);
+ // SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+ unsafe impl FromBytes for Elf64Hdr {}
+
+ #[repr(transparent)]
+ struct Elf64SHdr(bindings::elf64_shdr);
+ // SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+ unsafe impl FromBytes for Elf64SHdr {}
+
+ /// Tries to extract section with name `name` from the ELF64 image `elf`, and returns it.
+ pub(super) fn elf64_section<'a, 'b>(elf: &'a [u8], name: &'b str) -> Option<&'a [u8]> {
+ let hdr = &elf
+ .get(0..size_of::<bindings::elf64_hdr>())
+ .and_then(Elf64Hdr::from_bytes)?
+ .0;
+
+ // Get all the section headers.
+ let mut shdr = {
+ let shdr_num = usize::from(hdr.e_shnum);
+ let shdr_start = usize::try_from(hdr.e_shoff).ok()?;
+ let shdr_end = shdr_num
+ .checked_mul(size_of::<Elf64SHdr>())
+ .and_then(|v| v.checked_add(shdr_start))?;
+
+ elf.get(shdr_start..shdr_end)
+ .map(|slice| slice.chunks_exact(size_of::<Elf64SHdr>()))?
+ };
+
+ // Get the strings table.
+ let strhdr = shdr
+ .clone()
+ .nth(usize::from(hdr.e_shstrndx))
+ .and_then(Elf64SHdr::from_bytes)?;
+
+ // Find the section which name matches `name` and return it.
+ shdr.find(|&sh| {
+ let Some(hdr) = Elf64SHdr::from_bytes(sh) else {
+ return false;
+ };
+
+ let Some(name_idx) = strhdr
+ .0
+ .sh_offset
+ .checked_add(u64::from(hdr.0.sh_name))
+ .and_then(|idx| usize::try_from(idx).ok())
+ else {
+ return false;
+ };
+
+ // Get the start of the name.
+ elf.get(name_idx..)
+ // Stop at the first `0`.
+ .and_then(|nstr| nstr.get(0..=nstr.iter().position(|b| *b == 0)?))
+ // Convert into CStr. This should never fail because of the line above.
+ .and_then(|nstr| CStr::from_bytes_with_nul(nstr).ok())
+ // Convert into str.
+ .and_then(|c_str| c_str.to_str().ok())
+ // Check that the name matches.
+ .map(|str| str == name)
+ .unwrap_or(false)
+ })
+ // Return the slice containing the section.
+ .and_then(|sh| {
+ let hdr = Elf64SHdr::from_bytes(sh)?;
+ let start = usize::try_from(hdr.0.sh_offset).ok()?;
+ let end = usize::try_from(hdr.0.sh_size)
+ .ok()
+ .and_then(|sh_size| start.checked_add(sh_size))?;
+
+ elf.get(start..end)
+ })
+ }
+}
+
+/// GSP firmware with 3-level radix page tables for the GSP bootloader.
+///
+/// The bootloader expects firmware to be mapped starting at address 0 in GSP's virtual address
+/// space:
+///
+/// ```text
+/// Level 0: 1 page, 1 entry -> points to first level 1 page
+/// Level 1: Multiple pages/entries -> each entry points to a level 2 page
+/// Level 2: Multiple pages/entries -> each entry points to a firmware page
+/// ```
+///
+/// Each page is 4KB, each entry is 8 bytes (64-bit DMA address).
+/// Also known as "Radix3" firmware.
+#[pin_data]
+pub(crate) struct GspFirmware {
+ /// The GSP firmware inside a [`VVec`], device-mapped via a SG table.
+ #[pin]
+ fw: SGTable<Owned<VVec<u8>>>,
+ /// Level 2 page table whose entries contain DMA addresses of firmware pages.
+ #[pin]
+ level2: SGTable<Owned<VVec<u8>>>,
+ /// Level 1 page table whose entries contain DMA addresses of level 2 pages.
+ #[pin]
+ level1: SGTable<Owned<VVec<u8>>>,
+ /// Level 0 page table (single 4KB page) with one entry: DMA address of first level 1 page.
+ level0: DmaObject,
+ /// Size in bytes of the firmware contained in [`Self::fw`].
+ pub size: usize,
+ /// Device-mapped GSP signatures matching the GPU's [`Chipset`].
+ signatures: DmaObject,
+}
+
+impl GspFirmware {
+ /// Loads the GSP firmware binaries, map them into `dev`'s address-space, and creates the page
+ /// tables expected by the GSP bootloader to load it.
+ pub(crate) fn new<'a, 'b>(
+ dev: &'a device::Device<device::Bound>,
+ chipset: Chipset,
+ ver: &'b str,
+ ) -> Result<impl PinInit<Self, Error> + 'a> {
+ let fw = super::request_nv_firmware(dev, chipset, "gsp", ver)?;
+
+ let fw_section = elf::elf64_section(fw.data(), ".fwimage").ok_or(EINVAL)?;
+
+ let sigs_section = match chipset.arch() {
+ Architecture::Ampere => ".fwsignature_ga10x",
+ _ => return Err(ENOTSUPP),
+ };
+ let signatures = elf::elf64_section(fw.data(), sigs_section)
+ .ok_or(EINVAL)
+ .and_then(|data| DmaObject::from_data(dev, data))?;
+
+ let size = fw_section.len();
+
+ // Move the firmware into a vmalloc'd vector and map it into the device address
+ // space.
+ let fw_vvec = VVec::with_capacity(fw_section.len(), GFP_KERNEL)
+ .and_then(|mut v| {
+ v.extend_from_slice(fw_section, GFP_KERNEL)?;
+ Ok(v)
+ })
+ .map_err(|_| ENOMEM)?;
+
+ Ok(try_pin_init!(Self {
+ fw <- SGTable::new(dev, fw_vvec, DataDirection::ToDevice, GFP_KERNEL),
+ level2 <- {
+ // Allocate the level 2 page table, map the firmware onto it, and map it into the
+ // device address space.
+ VVec::<u8>::with_capacity(
+ fw.iter().count() * core::mem::size_of::<u64>(),
+ GFP_KERNEL,
+ )
+ .map_err(|_| ENOMEM)
+ .and_then(|level2| map_into_lvl(&fw, level2))
+ .map(|level2| SGTable::new(dev, level2, DataDirection::ToDevice, GFP_KERNEL))?
+ },
+ level1 <- {
+ // Allocate the level 1 page table, map the level 2 page table onto it, and map it
+ // into the device address space.
+ VVec::<u8>::with_capacity(
+ level2.iter().count() * core::mem::size_of::<u64>(),
+ GFP_KERNEL,
+ )
+ .map_err(|_| ENOMEM)
+ .and_then(|level1| map_into_lvl(&level2, level1))
+ .map(|level1| SGTable::new(dev, level1, DataDirection::ToDevice, GFP_KERNEL))?
+ },
+ level0: {
+ // Allocate the level 0 page table as a device-visible DMA object, and map the
+ // level 1 page table onto it.
+
+ // Level 0 page table data.
+ let mut level0_data = kvec![0u8; GSP_PAGE_SIZE]?;
+
+ // Fill level 1 page entry.
+ #[allow(clippy::useless_conversion)]
+ let level1_entry = u64::from(level1.iter().next().unwrap().dma_address());
+ let dst = &mut level0_data[..size_of_val(&level1_entry)];
+ dst.copy_from_slice(&level1_entry.to_le_bytes());
+
+ // Turn the level0 page table into a [`DmaObject`].
+ DmaObject::from_data(dev, &level0_data)?
+ },
+ size,
+ signatures,
+ }))
+ }
+
+ #[expect(unused)]
+ /// Returns the DMA handle of the radix3 level 0 page table.
+ pub(crate) fn radix3_dma_handle(&self) -> DmaAddress {
+ self.level0.dma_handle()
+ }
+}
+
+/// Build a page table from a scatter-gather list.
+///
+/// Takes each DMA-mapped region from `sg_table` and writes page table entries
+/// for all 4KB pages within that region. For example, a 16KB SG entry becomes
+/// 4 consecutive page table entries.
+fn map_into_lvl(sg_table: &SGTable<Owned<VVec<u8>>>, mut dst: VVec<u8>) -> Result<VVec<u8>> {
+ for sg_entry in sg_table.iter() {
+ // Number of pages we need to map.
+ let num_pages = (sg_entry.dma_len() as usize).div_ceil(GSP_PAGE_SIZE);
+
+ for i in 0..num_pages {
+ let entry = sg_entry.dma_address() + (i as u64 * GSP_PAGE_SIZE as u64);
+ dst.extend_from_slice(&entry.to_le_bytes(), GFP_KERNEL)?;
+ }
+ }
+
+ Ok(dst)
+}
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 53fadbeea7b611712ca343af71bcdc01f1005673..562ad162863fdad9275cb813d0586d074dae2c4f 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -8,6 +8,7 @@
use crate::fb::SysmemFlush;
use crate::firmware::booter::{BooterFirmware, BooterKind};
use crate::firmware::fwsec::{FwsecCommand, FwsecFirmware};
+use crate::firmware::gsp::GspFirmware;
use crate::firmware::{Firmware, FIRMWARE_VERSION};
use crate::gfw;
use crate::regs;
@@ -282,6 +283,11 @@ pub(crate) fn start_gsp(
let bios = Vbios::new(dev, bar)?;
+ let _gsp_fw = KBox::pin_init(
+ GspFirmware::new(dev, chipset, FIRMWARE_VERSION)?,
+ GFP_KERNEL,
+ )?;
+
let fb_layout = FbLayout::new(chipset, bar)?;
dev_dbg!(dev, "{:#x?}\n", fb_layout);
diff --git a/drivers/gpu/nova-core/gsp.rs b/drivers/gpu/nova-core/gsp.rs
new file mode 100644
index 0000000000000000000000000000000000000000..a0e7ec5f6c9c959d57540b3ebf4b782f2e002b08
--- /dev/null
+++ b/drivers/gpu/nova-core/gsp.rs
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+
+pub(crate) const GSP_PAGE_SHIFT: usize = 12;
+pub(crate) const GSP_PAGE_SIZE: usize = 1 << GSP_PAGE_SHIFT;
diff --git a/drivers/gpu/nova-core/nova_core.rs b/drivers/gpu/nova-core/nova_core.rs
index cb2bbb30cba142265b354c9acf70349a6e40759e..fffcaee2249fe6cd7f55a7291c1e44be42e791d9 100644
--- a/drivers/gpu/nova-core/nova_core.rs
+++ b/drivers/gpu/nova-core/nova_core.rs
@@ -9,6 +9,7 @@
mod firmware;
mod gfw;
mod gpu;
+mod gsp;
mod regs;
mod util;
mod vbios;
--
2.51.0The GSP bootloader is a small RISC-V firmware that is loaded by Booter
onto the GSP core and is in charge of loading, validating, and starting
the actual GSP firmware.
It is a regular binary firmware file containing a specific header.
Create a type holding the DMA-mapped firmware as well as useful
information extracted from the header, and hook it into our firmware
structure for later use.
The GSP bootloader is stored into the `GspFirmware` structure, since it
is part of the GSP firmware package. This makes the `Firmware` structure
empty, so remove it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/firmware.rs | 18 +------
drivers/gpu/nova-core/firmware/gsp.rs | 7 +++
drivers/gpu/nova-core/firmware/riscv.rs | 89 +++++++++++++++++++++++++++++++++
drivers/gpu/nova-core/gpu.rs | 5 +-
4 files changed, 98 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index cef910a7c2dc360139fafc2a01a050a9df40e45f..af7356a14def2ee92c3285878ea4de64eb48d344 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -15,11 +15,11 @@
use crate::dma::DmaObject;
use crate::falcon::FalconFirmware;
use crate::gpu;
-use crate::gpu::Chipset;
pub(crate) mod booter;
pub(crate) mod fwsec;
pub(crate) mod gsp;
+pub(crate) mod riscv;
pub(crate) const FIRMWARE_VERSION: &str = "535.113.01";
@@ -36,22 +36,6 @@ fn request_nv_firmware(
.and_then(|path| firmware::Firmware::request(&path, dev))
}
-/// Structure encapsulating the firmware blobs required for the GPU to operate.
-#[expect(dead_code)]
-pub(crate) struct Firmware {
- bootloader: firmware::Firmware,
-}
-
-impl Firmware {
- pub(crate) fn new(dev: &device::Device, chipset: Chipset, ver: &str) -> Result<Firmware> {
- let request = |name| request_nv_firmware(dev, chipset, name, ver);
-
- Ok(Firmware {
- bootloader: request("bootloader")?,
- })
- }
-}
-
/// Structure used to describe some firmwares, notably FWSEC-FRTS.
#[repr(C)]
#[derive(Debug, Clone)]
diff --git a/drivers/gpu/nova-core/firmware/gsp.rs b/drivers/gpu/nova-core/firmware/gsp.rs
index 9242e8ef6a0183cbfe5e75a3d6552ff528a2cedc..d25a21b42fc8b3987c861965e6ea56d929570b70 100644
--- a/drivers/gpu/nova-core/firmware/gsp.rs
+++ b/drivers/gpu/nova-core/firmware/gsp.rs
@@ -7,6 +7,7 @@
use kernel::scatterlist::{Owned, SGTable};
use crate::dma::DmaObject;
+use crate::firmware::riscv::RiscvFirmware;
use crate::gpu::{Architecture, Chipset};
use crate::gsp::GSP_PAGE_SIZE;
@@ -127,6 +128,8 @@ pub(crate) struct GspFirmware {
pub size: usize,
/// Device-mapped GSP signatures matching the GPU's [`Chipset`].
signatures: DmaObject,
+ /// GSP bootloader, verifies the GSP firmware before loading and running it.
+ bootloader: RiscvFirmware,
}
impl GspFirmware {
@@ -160,6 +163,9 @@ pub(crate) fn new<'a, 'b>(
})
.map_err(|_| ENOMEM)?;
+ let bl = super::request_nv_firmware(dev, chipset, "bootloader", ver)?;
+ let bootloader = RiscvFirmware::new(dev, &bl)?;
+
Ok(try_pin_init!(Self {
fw <- SGTable::new(dev, fw_vvec, DataDirection::ToDevice, GFP_KERNEL),
level2 <- {
@@ -202,6 +208,7 @@ pub(crate) fn new<'a, 'b>(
},
size,
signatures,
+ bootloader,
}))
}
diff --git a/drivers/gpu/nova-core/firmware/riscv.rs b/drivers/gpu/nova-core/firmware/riscv.rs
new file mode 100644
index 0000000000000000000000000000000000000000..b7eef29956995c49ab1466bb6a71a756731bf78a
--- /dev/null
+++ b/drivers/gpu/nova-core/firmware/riscv.rs
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Support for firmware binaries designed to run on a RISC-V core. Such firmwares files have a
+//! dedicated header.
+
+use kernel::device;
+use kernel::firmware::Firmware;
+use kernel::prelude::*;
+use kernel::transmute::FromBytes;
+
+use crate::dma::DmaObject;
+use crate::firmware::BinFirmware;
+
+/// Descriptor for microcode running on a RISC-V core.
+#[repr(C)]
+#[derive(Debug)]
+struct RmRiscvUCodeDesc {
+ version: u32,
+ bootloader_offset: u32,
+ bootloader_size: u32,
+ bootloader_param_offset: u32,
+ bootloader_param_size: u32,
+ riscv_elf_offset: u32,
+ riscv_elf_size: u32,
+ app_version: u32,
+ manifest_offset: u32,
+ manifest_size: u32,
+ monitor_data_offset: u32,
+ monitor_data_size: u32,
+ monitor_code_offset: u32,
+ monitor_code_size: u32,
+}
+
+// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
+unsafe impl FromBytes for RmRiscvUCodeDesc {}
+
+impl RmRiscvUCodeDesc {
+ /// Interprets the header of `bin_fw` as a [`RmRiscvUCodeDesc`] and returns it.
+ ///
+ /// Fails if the header pointed at by `bin_fw` is not within the bounds of the firmware image.
+ fn new(bin_fw: &BinFirmware<'_>) -> Result<Self> {
+ let offset = bin_fw.hdr.header_offset as usize;
+
+ bin_fw
+ .fw
+ .get(offset..offset + size_of::<Self>())
+ .and_then(Self::from_bytes_copy)
+ .ok_or(EINVAL)
+ }
+}
+
+/// A parsed firmware for a RISC-V core, ready to be loaded and run.
+#[expect(unused)]
+pub(crate) struct RiscvFirmware {
+ /// Offset at which the code starts in the firmware image.
+ code_offset: u32,
+ /// Offset at which the data starts in the firmware image.
+ data_offset: u32,
+ /// Offset at which the manifest starts in the firmware image.
+ manifest_offset: u32,
+ /// Application version.
+ app_version: u32,
+ /// Device-mapped firmware image.
+ ucode: DmaObject,
+}
+
+impl RiscvFirmware {
+ /// Parses the RISC-V firmware image contained in `fw`.
+ pub(crate) fn new(dev: &device::Device<device::Bound>, fw: &Firmware) -> Result<Self> {
+ let bin_fw = BinFirmware::new(fw)?;
+
+ let riscv_desc = RmRiscvUCodeDesc::new(&bin_fw)?;
+
+ let ucode = {
+ let start = bin_fw.hdr.data_offset as usize;
+ let len = bin_fw.hdr.data_size as usize;
+
+ DmaObject::from_data(dev, fw.data().get(start..start + len).ok_or(EINVAL)?)?
+ };
+
+ Ok(Self {
+ ucode,
+ code_offset: riscv_desc.monitor_code_offset,
+ data_offset: riscv_desc.monitor_data_offset,
+ manifest_offset: riscv_desc.manifest_offset,
+ app_version: riscv_desc.app_version,
+ })
+ }
+}
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 562ad162863fdad9275cb813d0586d074dae2c4f..52b856cdb2934ba1585ceec12fd9a219dc0034e0 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -9,7 +9,7 @@
use crate::firmware::booter::{BooterFirmware, BooterKind};
use crate::firmware::fwsec::{FwsecCommand, FwsecFirmware};
use crate::firmware::gsp::GspFirmware;
-use crate::firmware::{Firmware, FIRMWARE_VERSION};
+use crate::firmware::FIRMWARE_VERSION;
use crate::gfw;
use crate::regs;
use crate::vbios::Vbios;
@@ -179,7 +179,6 @@ pub(crate) struct Gpu {
spec: Spec,
/// MMIO mapping of PCI BAR 0
bar: Arc<Devres<Bar0>>,
- fw: Firmware,
/// System memory page required for flushing all pending GPU-side memory writes done through
/// PCIE into system memory, via sysmembar (A GPU-initiated HW memory-barrier operation).
sysmem_flush: SysmemFlush,
@@ -311,7 +310,6 @@ pub(crate) fn new(
) -> Result<impl PinInit<Self>> {
let bar = devres_bar.access(pdev.as_ref())?;
let spec = Spec::new(bar)?;
- let fw = Firmware::new(pdev.as_ref(), spec.chipset, FIRMWARE_VERSION)?;
dev_info!(
pdev.as_ref(),
@@ -343,7 +341,6 @@ pub(crate) fn new(
Ok(pin_init!(Self {
spec,
bar: devres_bar,
- fw,
sysmem_flush,
gsp_falcon,
sec2_falcon,
--
2.51.0570.144 is the latest available into linux-firmware as of this commit,
and the one we will use to start development of nova-core. It should
eventually be dropped for a newer version before the driver becomes able
to do anything useful. The newer firmware is expected to iron out some
of the inelegances of 570.144, notably related to packaging.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/firmware.rs | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index af7356a14def2ee92c3285878ea4de64eb48d344..9a97e97a3c7b4ac65b66e4e5f092839720ded82d 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -21,7 +21,7 @@
pub(crate) mod gsp;
pub(crate) mod riscv;
-pub(crate) const FIRMWARE_VERSION: &str = "535.113.01";
+pub(crate) const FIRMWARE_VERSION: &str = "570.144";
/// Requests the GPU firmware `name` suitable for `chipset`, with version `ver`.
fn request_nv_firmware(
--
2.51.0From: Alistair Popple <apopple@nvidia.com>
Interacting with the GSP currently requires using definitions from C
header files. Rust definitions for the types needed for Nova core will
be generated using the Rust bindgen tool. This patch adds the base
module to allow inclusion of the generated bindings. The generated
bindings themselves are added by subsequent patches when they are first
used.
Currently we only intend to support a single firmware version, 570.144,
with these bindings. Longer term we intend to move to a more stable GSP
interface that isn't tied to specific firmware versions.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: adapt the bindings module comment a bit]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/gsp.rs | 2 ++
drivers/gpu/nova-core/gsp/fw.rs | 7 ++++++
drivers/gpu/nova-core/gsp/fw/r570_144.rs | 29 +++++++++++++++++++++++
drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs | 1 +
4 files changed, 39 insertions(+)
diff --git a/drivers/gpu/nova-core/gsp.rs b/drivers/gpu/nova-core/gsp.rs
index a0e7ec5f6c9c959d57540b3ebf4b782f2e002b08..6933848eb950e97238ab43c7b8f9e022ffe84eba 100644
--- a/drivers/gpu/nova-core/gsp.rs
+++ b/drivers/gpu/nova-core/gsp.rs
@@ -1,4 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
+mod fw;
+
pub(crate) const GSP_PAGE_SHIFT: usize = 12;
pub(crate) const GSP_PAGE_SIZE: usize = 1 << GSP_PAGE_SHIFT;
diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs
new file mode 100644
index 0000000000000000000000000000000000000000..34226dd009824c1e44d0cb2e37b43434a364e433
--- /dev/null
+++ b/drivers/gpu/nova-core/gsp/fw.rs
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+mod r570_144;
+
+// Alias to avoid repeating the version number with every use.
+#[expect(unused)]
+use r570_144 as bindings;
diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144.rs b/drivers/gpu/nova-core/gsp/fw/r570_144.rs
new file mode 100644
index 0000000000000000000000000000000000000000..35cb0370a7c9b4604393931f9f3bf72ef4a794b4
--- /dev/null
+++ b/drivers/gpu/nova-core/gsp/fw/r570_144.rs
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Firmware bindings.
+//!
+//! Imports the generated bindings by `bindgen`.
+//!
+//! This module may not be directly used. Please abstract or re-export the needed symbols in the
+//! parent module instead.
+
+#![cfg_attr(test, allow(deref_nullptr))]
+#![cfg_attr(test, allow(unaligned_references))]
+#![cfg_attr(test, allow(unsafe_op_in_unsafe_fn))]
+#![allow(
+ dead_code,
+ unused_imports,
+ clippy::all,
+ clippy::undocumented_unsafe_blocks,
+ clippy::ptr_as_ptr,
+ clippy::ref_as_ptr,
+ missing_docs,
+ non_camel_case_types,
+ non_upper_case_globals,
+ non_snake_case,
+ improper_ctypes,
+ unreachable_pub,
+ unsafe_op_in_unsafe_fn
+)]
+use kernel::ffi;
+include!("r570_144/bindings.rs");
diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs
new file mode 100644
index 0000000000000000000000000000000000000000..cec5940325151e407aa90128a35cb683afd436d7
--- /dev/null
+++ b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs
@@ -0,0 +1 @@
+// SPDX-License-Identifier: GPL-2.0
--
2.51.0Compute more of the required FB layout information to boot the GSP
firmware.
This information is dependent on the firmware itself, so first we need
to import and abstract the required firmware bindings in the `nvfw`
module.
Then, a new FB HAL method is introduced in `fb::hal` that uses these
bindings and hardware information to compute the correct layout
information.
This information is then used in `fb` and the result made visible in
`FbLayout`.
These 3 things are grouped into the same patch to avoid lots of unused
warnings that would be tedious to work around. As they happen in
different files, they should not be too difficult to track separately.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/fb.rs | 65 ++++++++++-
drivers/gpu/nova-core/firmware/gsp.rs | 2 +-
drivers/gpu/nova-core/firmware/riscv.rs | 2 +-
drivers/gpu/nova-core/gpu.rs | 4 +-
drivers/gpu/nova-core/gsp.rs | 5 +
drivers/gpu/nova-core/gsp/fw.rs | 96 ++++++++++++++++-
drivers/gpu/nova-core/gsp/fw/r570_144.rs | 1 -
drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs | 125 ++++++++++++++++++++++
8 files changed, 292 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/nova-core/fb.rs b/drivers/gpu/nova-core/fb.rs
index 27d9edab8347c5ed3be104d62a9e32709238bb92..4d6a1f45218368dd3c0e79679f2733b5a15725e0 100644
--- a/drivers/gpu/nova-core/fb.rs
+++ b/drivers/gpu/nova-core/fb.rs
@@ -10,7 +10,9 @@
use crate::dma::DmaObject;
use crate::driver::Bar0;
+use crate::firmware::gsp::GspFirmware;
use crate::gpu::Chipset;
+use crate::gsp;
use crate::regs;
mod hal;
@@ -87,14 +89,28 @@ pub(crate) fn unregister(&self, bar: &Bar0) {
#[derive(Debug)]
#[expect(dead_code)]
pub(crate) struct FbLayout {
+ /// Range of the framebuffer. Starts at `0`.
pub(crate) fb: Range<u64>,
+ /// VGA workspace, small area of reserved memory at the end of the framebuffer.
pub(crate) vga_workspace: Range<u64>,
+ /// FRTS range.
pub(crate) frts: Range<u64>,
+ /// Memory area containing the GSP bootloader image.
+ pub(crate) boot: Range<u64>,
+ /// Memory area containing the GSP firmware image.
+ pub(crate) elf: Range<u64>,
+ /// WPR2 heap.
+ pub(crate) wpr2_heap: Range<u64>,
+ // WPR2 region range, starting with an instance of `GspFwWprMeta`.
+ pub(crate) wpr2: Range<u64>,
+ pub(crate) heap: Range<u64>,
+ pub(crate) vf_partition_count: u8,
}
impl FbLayout {
- /// Computes the FB layout.
- pub(crate) fn new(chipset: Chipset, bar: &Bar0) -> Result<Self> {
+ /// Computes the FB layout for `chipset`, for running the `bl` GSP bootloader and `gsp` GSP
+ /// firmware.
+ pub(crate) fn new(chipset: Chipset, bar: &Bar0, gsp_fw: &GspFirmware) -> Result<Self> {
let hal = hal::fb_hal(chipset);
let fb = {
@@ -138,10 +154,55 @@ pub(crate) fn new(chipset: Chipset, bar: &Bar0) -> Result<Self> {
frts_base..frts_base + FRTS_SIZE
};
+ let boot = {
+ const BOOTLOADER_DOWN_ALIGN: Alignment = Alignment::new::<SZ_4K>();
+ let bootloader_size = gsp_fw.bootloader.ucode.size() as u64;
+ let bootloader_base = (frts.start - bootloader_size).align_down(BOOTLOADER_DOWN_ALIGN);
+
+ bootloader_base..bootloader_base + bootloader_size
+ };
+
+ let elf = {
+ const ELF_DOWN_ALIGN: Alignment = Alignment::new::<SZ_64K>();
+ let elf_size = gsp_fw.size as u64;
+ let elf_addr = (boot.start - elf_size).align_down(ELF_DOWN_ALIGN);
+
+ elf_addr..elf_addr + elf_size
+ };
+
+ let wpr2_heap = {
+ const WPR2_HEAP_DOWN_ALIGN: Alignment = Alignment::new::<SZ_1M>();
+ let wpr2_heap_size =
+ crate::gsp::LibosParams::from_chipset(chipset).wpr_heap_size(chipset, fb.end);
+ let wpr2_heap_addr = (elf.start - wpr2_heap_size).align_down(WPR2_HEAP_DOWN_ALIGN);
+
+ wpr2_heap_addr..(elf.start).align_down(WPR2_HEAP_DOWN_ALIGN)
+ };
+
+ let wpr2 = {
+ const WPR2_DOWN_ALIGN: Alignment = Alignment::new::<SZ_1M>();
+ let wpr2_addr = (wpr2_heap.start - size_of::<gsp::GspFwWprMeta>() as u64)
+ .align_down(WPR2_DOWN_ALIGN);
+
+ wpr2_addr..frts.end
+ };
+
+ let heap = {
+ const HEAP_SIZE: u64 = SZ_1M as u64;
+
+ wpr2.start - HEAP_SIZE..wpr2.start
+ };
+
Ok(Self {
fb,
vga_workspace,
frts,
+ boot,
+ elf,
+ wpr2_heap,
+ wpr2,
+ heap,
+ vf_partition_count: 0,
})
}
}
diff --git a/drivers/gpu/nova-core/firmware/gsp.rs b/drivers/gpu/nova-core/firmware/gsp.rs
index d25a21b42fc8b3987c861965e6ea56d929570b70..46b21385cbd623b5feea37a3ab5dfe0a90258155 100644
--- a/drivers/gpu/nova-core/firmware/gsp.rs
+++ b/drivers/gpu/nova-core/firmware/gsp.rs
@@ -129,7 +129,7 @@ pub(crate) struct GspFirmware {
/// Device-mapped GSP signatures matching the GPU's [`Chipset`].
signatures: DmaObject,
/// GSP bootloader, verifies the GSP firmware before loading and running it.
- bootloader: RiscvFirmware,
+ pub bootloader: RiscvFirmware,
}
impl GspFirmware {
diff --git a/drivers/gpu/nova-core/firmware/riscv.rs b/drivers/gpu/nova-core/firmware/riscv.rs
index b7eef29956995c49ab1466bb6a71a756731bf78a..b90acfc81e7898ed1726430001d31ebbc976f9f1 100644
--- a/drivers/gpu/nova-core/firmware/riscv.rs
+++ b/drivers/gpu/nova-core/firmware/riscv.rs
@@ -61,7 +61,7 @@ pub(crate) struct RiscvFirmware {
/// Application version.
app_version: u32,
/// Device-mapped firmware image.
- ucode: DmaObject,
+ pub ucode: DmaObject,
}
impl RiscvFirmware {
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 52b856cdb2934ba1585ceec12fd9a219dc0034e0..b29651e1fcd2dfac0ad7384fc727fefdfa5b4ff1 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -282,12 +282,12 @@ pub(crate) fn start_gsp(
let bios = Vbios::new(dev, bar)?;
- let _gsp_fw = KBox::pin_init(
+ let gsp_fw = KBox::pin_init(
GspFirmware::new(dev, chipset, FIRMWARE_VERSION)?,
GFP_KERNEL,
)?;
- let fb_layout = FbLayout::new(chipset, bar)?;
+ let fb_layout = FbLayout::new(chipset, bar, &gsp_fw)?;
dev_dbg!(dev, "{:#x?}\n", fb_layout);
Self::run_fwsec_frts(dev, bar, gsp_falcon, &bios, &fb_layout)?;
diff --git a/drivers/gpu/nova-core/gsp.rs b/drivers/gpu/nova-core/gsp.rs
index 6933848eb950e97238ab43c7b8f9e022ffe84eba..6db9892b711bb5f6de29c8e0a6bc5c361827ee4f 100644
--- a/drivers/gpu/nova-core/gsp.rs
+++ b/drivers/gpu/nova-core/gsp.rs
@@ -2,5 +2,10 @@
mod fw;
+pub(crate) use fw::{GspFwWprMeta, LibosParams};
+
+use kernel::ptr::Alignment;
+
pub(crate) const GSP_PAGE_SHIFT: usize = 12;
pub(crate) const GSP_PAGE_SIZE: usize = 1 << GSP_PAGE_SHIFT;
+pub(crate) const GSP_HEAP_ALIGNMENT: Alignment = Alignment::new::<{ 1 << 20 }>();
diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs
index 34226dd009824c1e44d0cb2e37b43434a364e433..181baa4017705c65adfc1ad0a8454d592f9c69da 100644
--- a/drivers/gpu/nova-core/gsp/fw.rs
+++ b/drivers/gpu/nova-core/gsp/fw.rs
@@ -3,5 +3,99 @@
mod r570_144;
// Alias to avoid repeating the version number with every use.
-#[expect(unused)]
use r570_144 as bindings;
+
+use core::ops::Range;
+
+use kernel::ptr::Alignable;
+use kernel::sizes::SZ_1M;
+
+use crate::gpu::Chipset;
+use crate::gsp;
+
+/// Dummy type to group methods related to heap parameters for running the GSP firmware.
+pub(crate) struct GspFwHeapParams(());
+
+impl GspFwHeapParams {
+ /// Returns the amount of GSP-RM heap memory used during GSP-RM boot and initialization (up to
+ /// and including the first client subdevice allocation).
+ fn base_rm_size(_chipset: Chipset) -> u64 {
+ // TODO: this needs to be updated to return the correct value for Hopper+ once support for
+ // them is added:
+ // u64::from(bindings::GSP_FW_HEAP_PARAM_BASE_RM_SIZE_GH100)
+ u64::from(bindings::GSP_FW_HEAP_PARAM_BASE_RM_SIZE_TU10X)
+ }
+
+ /// Returns the amount of heap memory required to support a single channel allocation.
+ fn client_alloc_size() -> u64 {
+ u64::from(bindings::GSP_FW_HEAP_PARAM_CLIENT_ALLOC_SIZE)
+ .align_up(gsp::GSP_HEAP_ALIGNMENT)
+ .unwrap_or(u64::MAX)
+ }
+
+ /// Returns the amount of memory to reserve for management purposes for a framebuffer of size
+ /// `fb_size`.
+ fn management_overhead(fb_size: u64) -> u64 {
+ let fb_size_gb = fb_size.div_ceil(kernel::sizes::SZ_1G as u64);
+
+ u64::from(bindings::GSP_FW_HEAP_PARAM_SIZE_PER_GB_FB)
+ .saturating_mul(fb_size_gb)
+ .align_up(gsp::GSP_HEAP_ALIGNMENT)
+ .unwrap_or(u64::MAX)
+ }
+}
+
+/// Heap memory requirements and constraints for a given version of the GSP LIBOS.
+pub(crate) struct LibosParams {
+ /// The base amount of heap required by the GSP operating system, in bytes.
+ carveout_size: u64,
+ /// The minimum and maximum sizes allowed for the GSP FW heap, in bytes.
+ allowed_heap_size: Range<u64>,
+}
+
+impl LibosParams {
+ /// Version 2 of the GSP LIBOS (Turing and GA100)
+ const LIBOS2: LibosParams = LibosParams {
+ carveout_size: bindings::GSP_FW_HEAP_PARAM_OS_SIZE_LIBOS2 as u64,
+ allowed_heap_size: bindings::GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS2_MIN_MB as u64 * SZ_1M as u64
+ ..bindings::GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS2_MAX_MB as u64 * SZ_1M as u64,
+ };
+
+ /// Version 3 of the GSP LIBOS (GA102+)
+ const LIBOS3: LibosParams = LibosParams {
+ carveout_size: bindings::GSP_FW_HEAP_PARAM_OS_SIZE_LIBOS3_BAREMETAL as u64,
+ allowed_heap_size: bindings::GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS3_BAREMETAL_MIN_MB as u64
+ * SZ_1M as u64
+ ..bindings::GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS3_BAREMETAL_MAX_MB as u64 * SZ_1M as u64,
+ };
+
+ /// Returns the libos parameters corresponding to `chipset`.
+ pub(crate) fn from_chipset(chipset: Chipset) -> &'static LibosParams {
+ if chipset < Chipset::GA102 {
+ &Self::LIBOS2
+ } else {
+ &Self::LIBOS3
+ }
+ }
+
+ /// Returns the amount of memory (in bytes) to allocate for the WPR heap for a framebuffer size
+ /// of `fb_size` (in bytes) for `chipset`.
+ pub(crate) fn wpr_heap_size(&self, chipset: Chipset, fb_size: u64) -> u64 {
+ // The WPR heap will contain the following:
+ // LIBOS carveout,
+ self.carveout_size
+ // RM boot working memory,
+ .saturating_add(GspFwHeapParams::base_rm_size(chipset))
+ // One RM client,
+ .saturating_add(GspFwHeapParams::client_alloc_size())
+ // Overhead for memory management.
+ .saturating_add(GspFwHeapParams::management_overhead(fb_size))
+ // Clamp to the supported heap sizes.
+ .clamp(self.allowed_heap_size.start, self.allowed_heap_size.end - 1)
+ }
+}
+
+/// Structure passed to the GSP bootloader, containing the framebuffer layout as well as the DMA
+/// addresses of the GSP bootloader and firmware.
+#[repr(transparent)]
+pub(crate) struct GspFwWprMeta(bindings::GspFwWprMeta);
diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144.rs b/drivers/gpu/nova-core/gsp/fw/r570_144.rs
index 35cb0370a7c9b4604393931f9f3bf72ef4a794b4..82a973cd99c38eee39a0554e855a60e61dba2d01 100644
--- a/drivers/gpu/nova-core/gsp/fw/r570_144.rs
+++ b/drivers/gpu/nova-core/gsp/fw/r570_144.rs
@@ -12,7 +12,6 @@
#![cfg_attr(test, allow(unsafe_op_in_unsafe_fn))]
#![allow(
dead_code,
- unused_imports,
clippy::all,
clippy::undocumented_unsafe_blocks,
clippy::ptr_as_ptr,
diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs
index cec5940325151e407aa90128a35cb683afd436d7..0407000cca2296e713cc4701b635718fe51488cb 100644
--- a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs
+++ b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs
@@ -1 +1,126 @@
// SPDX-License-Identifier: GPL-2.0
+
+pub const GSP_FW_HEAP_PARAM_OS_SIZE_LIBOS2: u32 = 0;
+pub const GSP_FW_HEAP_PARAM_OS_SIZE_LIBOS3_BAREMETAL: u32 = 23068672;
+pub const GSP_FW_HEAP_PARAM_BASE_RM_SIZE_TU10X: u32 = 8388608;
+pub const GSP_FW_HEAP_PARAM_SIZE_PER_GB_FB: u32 = 98304;
+pub const GSP_FW_HEAP_PARAM_CLIENT_ALLOC_SIZE: u32 = 100663296;
+pub const GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS2_MIN_MB: u32 = 64;
+pub const GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS2_MAX_MB: u32 = 256;
+pub const GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS3_BAREMETAL_MIN_MB: u32 = 88;
+pub const GSP_FW_HEAP_SIZE_OVERRIDE_LIBOS3_BAREMETAL_MAX_MB: u32 = 280;
+pub type __u8 = ffi::c_uchar;
+pub type __u16 = ffi::c_ushort;
+pub type __u32 = ffi::c_uint;
+pub type __u64 = ffi::c_ulonglong;
+pub type u8_ = __u8;
+pub type u16_ = __u16;
+pub type u32_ = __u32;
+pub type u64_ = __u64;
+#[repr(C)]
+#[derive(Copy, Clone)]
+pub struct GspFwWprMeta {
+ pub magic: u64_,
+ pub revision: u64_,
+ pub sysmemAddrOfRadix3Elf: u64_,
+ pub sizeOfRadix3Elf: u64_,
+ pub sysmemAddrOfBootloader: u64_,
+ pub sizeOfBootloader: u64_,
+ pub bootloaderCodeOffset: u64_,
+ pub bootloaderDataOffset: u64_,
+ pub bootloaderManifestOffset: u64_,
+ pub __bindgen_anon_1: GspFwWprMeta__bindgen_ty_1,
+ pub gspFwRsvdStart: u64_,
+ pub nonWprHeapOffset: u64_,
+ pub nonWprHeapSize: u64_,
+ pub gspFwWprStart: u64_,
+ pub gspFwHeapOffset: u64_,
+ pub gspFwHeapSize: u64_,
+ pub gspFwOffset: u64_,
+ pub bootBinOffset: u64_,
+ pub frtsOffset: u64_,
+ pub frtsSize: u64_,
+ pub gspFwWprEnd: u64_,
+ pub fbSize: u64_,
+ pub vgaWorkspaceOffset: u64_,
+ pub vgaWorkspaceSize: u64_,
+ pub bootCount: u64_,
+ pub __bindgen_anon_2: GspFwWprMeta__bindgen_ty_2,
+ pub gspFwHeapVfPartitionCount: u8_,
+ pub flags: u8_,
+ pub padding: [u8_; 2usize],
+ pub pmuReservedSize: u32_,
+ pub verified: u64_,
+}
+#[repr(C)]
+#[derive(Copy, Clone)]
+pub union GspFwWprMeta__bindgen_ty_1 {
+ pub __bindgen_anon_1: GspFwWprMeta__bindgen_ty_1__bindgen_ty_1,
+ pub __bindgen_anon_2: GspFwWprMeta__bindgen_ty_1__bindgen_ty_2,
+}
+#[repr(C)]
+#[derive(Debug, Default, Copy, Clone)]
+pub struct GspFwWprMeta__bindgen_ty_1__bindgen_ty_1 {
+ pub sysmemAddrOfSignature: u64_,
+ pub sizeOfSignature: u64_,
+}
+#[repr(C)]
+#[derive(Debug, Default, Copy, Clone)]
+pub struct GspFwWprMeta__bindgen_ty_1__bindgen_ty_2 {
+ pub gspFwHeapFreeListWprOffset: u32_,
+ pub unused0: u32_,
+ pub unused1: u64_,
+}
+impl Default for GspFwWprMeta__bindgen_ty_1 {
+ fn default() -> Self {
+ let mut s = ::core::mem::MaybeUninit::<Self>::uninit();
+ unsafe {
+ ::core::ptr::write_bytes(s.as_mut_ptr(), 0, 1);
+ s.assume_init()
+ }
+ }
+}
+#[repr(C)]
+#[derive(Copy, Clone)]
+pub union GspFwWprMeta__bindgen_ty_2 {
+ pub __bindgen_anon_1: GspFwWprMeta__bindgen_ty_2__bindgen_ty_1,
+ pub __bindgen_anon_2: GspFwWprMeta__bindgen_ty_2__bindgen_ty_2,
+}
+#[repr(C)]
+#[derive(Debug, Default, Copy, Clone)]
+pub struct GspFwWprMeta__bindgen_ty_2__bindgen_ty_1 {
+ pub partitionRpcAddr: u64_,
+ pub partitionRpcRequestOffset: u16_,
+ pub partitionRpcReplyOffset: u16_,
+ pub elfCodeOffset: u32_,
+ pub elfDataOffset: u32_,
+ pub elfCodeSize: u32_,
+ pub elfDataSize: u32_,
+ pub lsUcodeVersion: u32_,
+}
+#[repr(C)]
+#[derive(Debug, Default, Copy, Clone)]
+pub struct GspFwWprMeta__bindgen_ty_2__bindgen_ty_2 {
+ pub partitionRpcPadding: [u32_; 4usize],
+ pub sysmemAddrOfCrashReportQueue: u64_,
+ pub sizeOfCrashReportQueue: u32_,
+ pub lsUcodeVersionPadding: [u32_; 1usize],
+}
+impl Default for GspFwWprMeta__bindgen_ty_2 {
+ fn default() -> Self {
+ let mut s = ::core::mem::MaybeUninit::<Self>::uninit();
+ unsafe {
+ ::core::ptr::write_bytes(s.as_mut_ptr(), 0, 1);
+ s.assume_init()
+ }
+ }
+}
+impl Default for GspFwWprMeta {
+ fn default() -> Self {
+ let mut s = ::core::mem::MaybeUninit::<Self>::uninit();
+ unsafe {
+ ::core::ptr::write_bytes(s.as_mut_ptr(), 0, 1);
+ s.assume_init()
+ }
+ }
+}
--
2.51.0© 2016 - 2025 Red Hat, Inc.