To prepare for dual-channel phy support, introduce can_transceiver_priv as
a higher level encapsulation for phy and mux_state.

No functional changes.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/phy/phy-can-transceiver.c | 41 ++++++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index f59caff4b3d4c267feca4220bf1547b6fad08f95..6415c6af0e8414a6cc8d15958a17ee749a3f28e9 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -23,6 +23,11 @@ struct can_transceiver_phy {
 	struct phy *generic_phy;
 	struct gpio_desc *standby_gpio;
 	struct gpio_desc *enable_gpio;
+	struct can_transceiver_priv *priv;
+};
+
+struct can_transceiver_priv {
+	struct can_transceiver_phy *can_transceiver_phy;
 	struct mux_state *mux_state;
 };
 
@@ -32,8 +37,8 @@ static int can_transceiver_phy_power_on(struct phy *phy)
 	struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
 	int ret;
 
-	if (can_transceiver_phy->mux_state) {
-		ret = mux_state_select(can_transceiver_phy->mux_state);
+	if (can_transceiver_phy->priv->mux_state) {
+		ret = mux_state_select(can_transceiver_phy->priv->mux_state);
 		if (ret) {
 			dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
 			return ret;
@@ -56,8 +61,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
 	if (can_transceiver_phy->enable_gpio)
 		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
-	if (can_transceiver_phy->mux_state)
-		mux_state_deselect(can_transceiver_phy->mux_state);
+	if (can_transceiver_phy->priv->mux_state)
+		mux_state_deselect(can_transceiver_phy->priv->mux_state);
 
 	return 0;
 }
@@ -107,7 +112,7 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
-	struct can_transceiver_phy *can_transceiver_phy;
+	struct can_transceiver_priv *priv;
 	const struct can_transceiver_data *drvdata;
 	const struct of_device_id *match;
 	struct phy *phy;
@@ -117,18 +122,25 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
 	u32 max_bitrate = 0;
 	int err;
 
-	can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL);
-	if (!can_transceiver_phy)
-		return -ENOMEM;
-
 	match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
 	drvdata = match->data;
 
+	priv = devm_kzalloc(dev, sizeof(struct can_transceiver_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy),
+						 GFP_KERNEL);
+	if (!priv->can_transceiver_phy)
+		return -ENOMEM;
+
 	mux_state = devm_mux_state_get_optional(dev, NULL);
 	if (IS_ERR(mux_state))
 		return PTR_ERR(mux_state);
 
-	can_transceiver_phy->mux_state = mux_state;
+	priv->mux_state = mux_state;
 
 	phy = devm_phy_create(dev, dev->of_node,
 			      &can_transceiver_phy_ops);
@@ -142,23 +154,24 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
 		dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
 	phy->attrs.max_link_rate = max_bitrate;
 
-	can_transceiver_phy->generic_phy = phy;
+	priv->can_transceiver_phy->generic_phy = phy;
+	priv->can_transceiver_phy->priv = priv;
 
 	if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
 		standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH);
 		if (IS_ERR(standby_gpio))
 			return PTR_ERR(standby_gpio);
-		can_transceiver_phy->standby_gpio = standby_gpio;
+		priv->can_transceiver_phy->standby_gpio = standby_gpio;
 	}
 
 	if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
 		enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
 		if (IS_ERR(enable_gpio))
 			return PTR_ERR(enable_gpio);
-		can_transceiver_phy->enable_gpio = enable_gpio;
+		priv->can_transceiver_phy->enable_gpio = enable_gpio;
 	}
 
-	phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy);
+	phy_set_drvdata(priv->can_transceiver_phy->generic_phy, priv->can_transceiver_phy);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 

-- 
2.37.1

On 09.09.2025 13:40:12, Peng Fan wrote:
> To prepare for dual-channel phy support, introduce can_transceiver_priv as
> a higher level encapsulation for phy and mux_state.
> 
> No functional changes.
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/phy/phy-can-transceiver.c | 41 ++++++++++++++++++++++++++-------------
>  1 file changed, 27 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
> index f59caff4b3d4c267feca4220bf1547b6fad08f95..6415c6af0e8414a6cc8d15958a17ee749a3f28e9 100644
> --- a/drivers/phy/phy-can-transceiver.c
> +++ b/drivers/phy/phy-can-transceiver.c
> @@ -23,6 +23,11 @@ struct can_transceiver_phy {
>  	struct phy *generic_phy;
>  	struct gpio_desc *standby_gpio;
>  	struct gpio_desc *enable_gpio;
> +	struct can_transceiver_priv *priv;

Can you convert this into a flexible-array? This reduces the overhead of
a 2nd allocation.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |