1. Patchew
  2. linux
  3. [PATCH v3 0/2] Remove HS400 support from common
  4. View patch

[PATCH v3 1/2] arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common

Judith Mendez posted 2 patches 1 day, 2 hours ago
[PATCH v3 1/2] arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common
Posted by Judith Mendez 1 day, 2 hours ago 
Since eMMC HS400 has been descoped for J722s due to errata i2478 [0]
and is supported for AM62Px device, remove eMMC HS400 support from
common-main.dtsi and include only in am62p-main.dtsi.

[0] https://www.ti.com/lit/pdf/sprz575
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 ---
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi              | 6 ++++++
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 4427b12058a6..0c05bcf1d776 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -576,15 +576,12 @@ sdhci0: mmc@fa10000 {
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
 		ti,clkbuf-sel = <0x7>;
-		ti,strobe-sel = <0x77>;
 		ti,trm-icp = <0x8>;
 		ti,otap-del-sel-legacy = <0x1>;
 		ti,otap-del-sel-mmc-hs = <0x1>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x8>;
-		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 6aea9d3f134e..020bd121a6a3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -74,3 +74,9 @@ &main_gpio1 {
 	gpio-reserved-ranges = <32 10>;
 	ti,ngpio = <52>;
 };
+
+&sdhci0 {
+	mmc-hs400-1_8v;
+	ti,strobe-sel = <0x77>;
+	ti,otap-del-sel-hs400 = <0x5>;
+};
-- 
2.51.0
Re: [PATCH v3 1/2] arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common
Posted by Moteen Shah 19 hours ago 
On 09/09/25 05:22, Judith Mendez wrote:
> Since eMMC HS400 has been descoped for J722s due to errata i2478 [0]
> and is supported for AM62Px device, remove eMMC HS400 support from
> common-main.dtsi and include only in am62p-main.dtsi.
>
> [0] https://www.ti.com/lit/pdf/sprz575
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 ---
>   arch/arm64/boot/dts/ti/k3-am62p-main.dtsi              | 6 ++++++
>   2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 4427b12058a6..0c05bcf1d776 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> @@ -576,15 +576,12 @@ sdhci0: mmc@fa10000 {
>   		bus-width = <8>;
>   		mmc-ddr-1_8v;
>   		mmc-hs200-1_8v;
> -		mmc-hs400-1_8v;
>   		ti,clkbuf-sel = <0x7>;
> -		ti,strobe-sel = <0x77>;
>   		ti,trm-icp = <0x8>;
>   		ti,otap-del-sel-legacy = <0x1>;
>   		ti,otap-del-sel-mmc-hs = <0x1>;
>   		ti,otap-del-sel-ddr52 = <0x6>;
>   		ti,otap-del-sel-hs200 = <0x8>;
> -		ti,otap-del-sel-hs400 = <0x5>;
>   		ti,itap-del-sel-legacy = <0x10>;
>   		ti,itap-del-sel-mmc-hs = <0xa>;
>   		ti,itap-del-sel-ddr52 = <0x3>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> index 6aea9d3f134e..020bd121a6a3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> @@ -74,3 +74,9 @@ &main_gpio1 {
>   	gpio-reserved-ranges = <32 10>;
>   	ti,ngpio = <52>;
>   };
> +
> +&sdhci0 {
> +	mmc-hs400-1_8v;
> +	ti,strobe-sel = <0x77>;
> +	ti,otap-del-sel-hs400 = <0x5>;
> +};

Reviewed-by: Moteen Shah <m-shah@ti.com>

Regards,
Moteen
Re: [PATCH v3 1/2] arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common
Posted by Andrew Davis 1 day, 2 hours ago 
On 9/8/25 6:52 PM, Judith Mendez wrote:
> Since eMMC HS400 has been descoped for J722s due to errata i2478 [0]
> and is supported for AM62Px device, remove eMMC HS400 support from
> common-main.dtsi and include only in am62p-main.dtsi.
> 
> [0] https://www.ti.com/lit/pdf/sprz575
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---

Reviewed-by: Andrew Davis <afd@ti.com>

>   arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 ---
>   arch/arm64/boot/dts/ti/k3-am62p-main.dtsi              | 6 ++++++
>   2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 4427b12058a6..0c05bcf1d776 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> @@ -576,15 +576,12 @@ sdhci0: mmc@fa10000 {
>   		bus-width = <8>;
>   		mmc-ddr-1_8v;
>   		mmc-hs200-1_8v;
> -		mmc-hs400-1_8v;
>   		ti,clkbuf-sel = <0x7>;
> -		ti,strobe-sel = <0x77>;
>   		ti,trm-icp = <0x8>;
>   		ti,otap-del-sel-legacy = <0x1>;
>   		ti,otap-del-sel-mmc-hs = <0x1>;
>   		ti,otap-del-sel-ddr52 = <0x6>;
>   		ti,otap-del-sel-hs200 = <0x8>;
> -		ti,otap-del-sel-hs400 = <0x5>;
>   		ti,itap-del-sel-legacy = <0x10>;
>   		ti,itap-del-sel-mmc-hs = <0xa>;
>   		ti,itap-del-sel-ddr52 = <0x3>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> index 6aea9d3f134e..020bd121a6a3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> @@ -74,3 +74,9 @@ &main_gpio1 {
>   	gpio-reserved-ranges = <32 10>;
>   	ti,ngpio = <52>;
>   };
> +
> +&sdhci0 {
> +	mmc-hs400-1_8v;
> +	ti,strobe-sel = <0x77>;
> +	ti,otap-del-sel-hs400 = <0x5>;
> +};

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.