Update the main TI TWL-family binding to be self-contained and to fix
pre-existing validation errors.

v6 key changes:
  - (1/3) The binding file is updated with stricter rules for the
    twl4030-power node.
  - Added two new patches, (2/3) & (3/3); The beagleboard-xm & n900 DTS
    files are respectively corrected to comply with the new binding.

The complete dtbs_check for this binding is clean except for two
warnings originating from pre-existing bugs in the OMAP DTS files,
for which fixes have already been submitted separately [1][2].

---
Changes in v6:
  - Refactored the ti,twl4030-power compatible schema to be much stricter,
    removing obsolete board-specific compatibles (-n900, -beagleboard-xm),
    that were added in v5. The schema now only permits specific, valid
    fallback combinations.
  - This series presents two new patches (2/3) & (3/3), which update the
    affected DTS files by removing obsolete entries.
  - Enforced the presence of the compatible property on all relevant
    sub-nodes by adding 'required: - compatible', closing a key validation
    loophole.
  - Applied various formatting cleanups for readability and correctness.

Changes in v5:
  - Restructured the entire binding to define properties at the top
    level instead of if/then blocks, per maintainer feedback.
  - Added specific compatible enums for new child nodes instead of a
    generic 'compatible: true'.
  - Set 'unevaluatedProperties: false' for 'pwm' and 'pwmled' nodes to
    enforce strict validation.
  - Expanded 'power' node compatible enum to include all board-specific
    compatible strings (used in existing device trees, e.g. OMAP3-based
    boards) for more complete coverage.
  - Corrected the schema for the 'power' node compatible to properly
    handle single and fallback entries.

Changes in v4:
  - Reworked binding to be independent and bisectable per maintainer
    feedback by using 'additionalProperties: true' for child nodes.
  - Added board-specific compatibles to the 'power' node enum.
  - Added definitions for 'clocks' and 'clock-names' properties.
  - Renamed 'twl6030-usb' child node to 'usb-comparator' to match
    existing Device Tree usage (twl6030.dtsi).
  - Fixed some spelling/grammar erros in the description.

Changes in v3:
  - New patch to consolidate simple bindings (power, pwm) and add
    definitions for all child nodes to fix dtbs_check validation
    errors found in v2.

Changes in v2:
  - This patch is split from larger series [3] per maintainer feedback.
  - Added missing sub-node definitions, resolving dtbs_check errors.

[1] https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
[2] https://lore.kernel.org/all/20250822225052.136919-1-jihed.chaibi.dev@gmail.com/
[3] https://lore.kernel.org/all/20250816021523.167049-1-jihed.chaibi.dev@gmail.com/

Jihed Chaibi (3):
  dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
  ARM: dts: omap3: beagle-xm: Correct obsolete TWL4030 power compatible
  ARM: dts: omap3: n900: Correct obsolete TWL4030 power compatible

 .../devicetree/bindings/mfd/ti,twl.yaml       | 221 +++++++++++++++++-
 .../devicetree/bindings/mfd/twl4030-power.txt |  48 ----
 .../devicetree/bindings/pwm/ti,twl-pwm.txt    |  17 --
 .../devicetree/bindings/pwm/ti,twl-pwmled.txt |  17 --
 arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts |   2 +-
 arch/arm/boot/dts/ti/omap/omap3-n900.dts      |   2 +-
 6 files changed, 212 insertions(+), 95 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/twl4030-power.txt
 delete mode 100644 Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
 delete mode 100644 Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt

-- 
2.39.5