[PATCH net-next v7 0/3] net: dsa: yt921x: Add support for Motorcomm YT921x

David Yang posted 3 patches 4 days, 7 hours ago
.../bindings/net/dsa/motorcomm,yt921x.yaml    |  169 +
drivers/net/dsa/Kconfig                       |    7 +
drivers/net/dsa/Makefile                      |    1 +
drivers/net/dsa/yt921x.c                      | 3004 +++++++++++++++++
drivers/net/dsa/yt921x.h                      |  593 ++++
include/net/dsa.h                             |    2 +
include/uapi/linux/if_ether.h                 |    1 +
net/dsa/Kconfig                               |    6 +
net/dsa/Makefile                              |    1 +
net/dsa/tag_yt921x.c                          |  138 +
10 files changed, 3922 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml
create mode 100644 drivers/net/dsa/yt921x.c
create mode 100644 drivers/net/dsa/yt921x.h
create mode 100644 net/dsa/tag_yt921x.c
[PATCH net-next v7 0/3] net: dsa: yt921x: Add support for Motorcomm YT921x
Posted by David Yang 4 days, 7 hours ago
Motorcomm YT921x is a series of ethernet switches developed by Shanghai
Motorcomm Electronic Technology, including:

  - YT9215S / YT9215RB / YT9215SC: 5 GbE phys
  - YT9213NB / YT9214NB: 2 GbE phys
  - YT9218N / YT9218MB: 8 GbE phys

and up to 2 serdes interfaces.

This patch adds basic support for a working DSA switch.

v6: https://lore.kernel.org/r/20250824005116.2434998-1-mmyangfl@gmail.com
  - handle unforwarded packets in tag driver
  - move register and struct definitions to header file
  - rework register abstraction and implement a driver lock
  - implement *_stats and use a periodic work to fetch MIB
  - remove EEPROM dump
  - remove sysfs attr and other debug leftovers
  - remove ds->user_mii_bus assignment
  - run selftests and fix any errors found
v5: https://lore.kernel.org/r/20250820075420.1601068-1-mmyangfl@gmail.com
  - use enum for reg in dt binding
  - fix phylink_mac_ops in the driver
  - fix coding style
v4: https://lore.kernel.org/r/20250818162445.1317670-1-mmyangfl@gmail.com
  - remove switchid from dt binding
  - remove hsr from tag driver
  - use ratelimited log in tag driver
v3: https://lore.kernel.org/r/20250816052323.360788-1-mmyangfl@gmail.com
  - fix words and warnings in dt binding
  - remove unnecessary dev_warn_ratelimited and u64_from_u32
  - remove lag and mst
  - check for mdio results and fix a unlocked write in conduit_state_change
v2: https://lore.kernel.org/r/20250814065032.3766988-1-mmyangfl@gmail.com
  - fix words in dt binding
  - add support for lag and mst
v1: https://lore.kernel.org/r/20250808173808.273774-1-mmyangfl@gmail.com
  - fix coding style
  - add dt binding
  - add support for fdb, vlan and bridge

David Yang (3):
  dt-bindings: net: dsa: yt921x: Add Motorcomm YT921x switch support
  net: dsa: tag_yt921x: add support for Motorcomm YT921x tags
  net: dsa: yt921x: Add support for Motorcomm YT921x

 .../bindings/net/dsa/motorcomm,yt921x.yaml    |  169 +
 drivers/net/dsa/Kconfig                       |    7 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/yt921x.c                      | 3004 +++++++++++++++++
 drivers/net/dsa/yt921x.h                      |  593 ++++
 include/net/dsa.h                             |    2 +
 include/uapi/linux/if_ether.h                 |    1 +
 net/dsa/Kconfig                               |    6 +
 net/dsa/Makefile                              |    1 +
 net/dsa/tag_yt921x.c                          |  138 +
 10 files changed, 3922 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml
 create mode 100644 drivers/net/dsa/yt921x.c
 create mode 100644 drivers/net/dsa/yt921x.h
 create mode 100644 net/dsa/tag_yt921x.c

-- 
2.50.1