1. Patchew
  2. linux
  3. View series

[PATCH net-next] r8169: set EEE speed down ratio to 1

ChunHao Lin posted 1 patch 4 weeks, 1 day ago
There is a newer version of this series
drivers/net/ethernet/realtek/r8169_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
[PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by ChunHao Lin 4 weeks, 1 day ago 
EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE speed down
rate. The larger this value is, the more power can save. But it actually save
less power then expected, but will impact compatibility. So set it to 1 (mac
ocp 0xe056[7:4] = 0) to improve compatibility.

Signed-off-by: ChunHao Lin <hau@realtek.com>
---
 drivers/net/ethernet/realtek/r8169_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 9c601f271c02..e5427dfce268 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -3409,7 +3409,7 @@ static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
 		r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
 	}
 
-	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
+	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
 	r8168_mac_ocp_modify(tp, 0xe052, 0x6000, 0x8008);
 	r8168_mac_ocp_modify(tp, 0xe0d6, 0x01ff, 0x017f);
 	r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f);
@@ -3514,7 +3514,7 @@ static void rtl_hw_start_8117(struct rtl8169_private *tp)
 		r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
 	}
 
-	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
+	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
 	r8168_mac_ocp_write(tp, 0xea80, 0x0003);
 	r8168_mac_ocp_modify(tp, 0xe052, 0x0000, 0x0009);
 	r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f);
@@ -3715,7 +3715,7 @@ static void rtl_hw_start_8125_common(struct rtl8169_private *tp)
 	r8168_mac_ocp_modify(tp, 0xc0b4, 0x0000, 0x000c);
 	r8168_mac_ocp_modify(tp, 0xeb6a, 0x00ff, 0x0033);
 	r8168_mac_ocp_modify(tp, 0xeb50, 0x03e0, 0x0040);
-	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0030);
+	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
 	r8168_mac_ocp_modify(tp, 0xe040, 0x1000, 0x0000);
 	r8168_mac_ocp_modify(tp, 0xea1c, 0x0003, 0x0001);
 	if (tp->mac_version == RTL_GIGA_MAC_VER_70 ||
-- 
2.43.0
Re: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Heiner Kallweit 3 weeks, 6 days ago 
On 9/4/2025 4:11 AM, ChunHao Lin wrote:
> EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE speed down
> rate. The larger this value is, the more power can save. But it actually save
> less power then expected, but will impact compatibility. So set it to 1 (mac
> ocp 0xe056[7:4] = 0) to improve compatibility.
> 
> Signed-off-by: ChunHao Lin <hau@realtek.com>
> ---

Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
RE: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Hau 2 weeks, 1 day ago 
> 
> External mail : This email originated from outside the organization. Do not
> reply, click links, or open attachments unless you recognize the sender and
> know the content is safe.
> 
> 
> 
> On 9/4/2025 4:11 AM, ChunHao Lin wrote:
> > EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE
> > speed down rate. The larger this value is, the more power can save.
> > But it actually save less power then expected, but will impact
> > compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) to improve
> compatibility.
> >
> > Signed-off-by: ChunHao Lin <hau@realtek.com>
> > ---
> 
> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>

This patch seems has been reviewed. But I did not see it been accepted. Should I resubmit the patch?
Re: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Heiner Kallweit 2 weeks, 1 day ago 
On 9/17/2025 4:48 PM, Hau wrote:
>>
>> External mail : This email originated from outside the organization. Do not
>> reply, click links, or open attachments unless you recognize the sender and
>> know the content is safe.
>>
>>
>>
>> On 9/4/2025 4:11 AM, ChunHao Lin wrote:
>>> EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE
>>> speed down rate. The larger this value is, the more power can save.
>>> But it actually save less power then expected, but will impact
>>> compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) to improve
>> compatibility.
>>>
>>> Signed-off-by: ChunHao Lin <hau@realtek.com>
>>> ---
>>
>> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
> 
> This patch seems has been reviewed. But I did not see it been accepted. Should I resubmit the patch?

Its status in patchwork is "changes requested", likely due to the fact that we had a conversation
about the patch. So yes, please resubmit, with my Rb, and best also add the following, that you wrote,
to the commit message.

It means clock (MAC MCU) speed down. It is not from spec, so it is kind of Realtek specific feature.
It may cause packet drop or interrupt loss (different hardware may have different issue).
RE: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Hau 2 weeks, 1 day ago 
> >>
> >> External mail : This email originated from outside the organization.
> >> Do not reply, click links, or open attachments unless you recognize
> >> the sender and know the content is safe.
> >>
> >>
> >>
> >> On 9/4/2025 4:11 AM, ChunHao Lin wrote:
> >>> EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE
> >>> speed down rate. The larger this value is, the more power can save.
> >>> But it actually save less power then expected, but will impact
> >>> compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) to improve
> >> compatibility.
> >>>
> >>> Signed-off-by: ChunHao Lin <hau@realtek.com>
> >>> ---
> >>
> >> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
> >
> > This patch seems has been reviewed. But I did not see it been accepted.
> Should I resubmit the patch?
> 
> Its status in patchwork is "changes requested", likely due to the fact that we
> had a conversation about the patch. So yes, please resubmit, with my Rb,
> and best also add the following, that you wrote, to the commit message.
> 
I will resubmit the patch. Thanks.

> It means clock (MAC MCU) speed down. It is not from spec, so it is kind of
> Realtek specific feature.
> It may cause packet drop or interrupt loss (different hardware may have
> different issue).
Re: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Heiner Kallweit 4 weeks, 1 day ago 
On 9/4/2025 4:11 AM, ChunHao Lin wrote:
> EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE speed down
> rate. The larger this value is, the more power can save. But it actually save
> less power then expected, but will impact compatibility. So set it to 1 (mac
> ocp 0xe056[7:4] = 0) to improve compatibility.
> 
Hi Hau,

what kind of speed is this referring to? Some clock, or link speed, or ..?
Is EEE speed down a Realtek-specific feature?

Are there known issues with the values used currently? Depending on the
answer we might consider this a fix.

Heiner

> Signed-off-by: ChunHao Lin <hau@realtek.com>
> ---
>  drivers/net/ethernet/realtek/r8169_main.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 9c601f271c02..e5427dfce268 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -3409,7 +3409,7 @@ static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
>  		r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
>  	}
>  
> -	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
> +	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>  	r8168_mac_ocp_modify(tp, 0xe052, 0x6000, 0x8008);
>  	r8168_mac_ocp_modify(tp, 0xe0d6, 0x01ff, 0x017f);
>  	r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f);
> @@ -3514,7 +3514,7 @@ static void rtl_hw_start_8117(struct rtl8169_private *tp)
>  		r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
>  	}
>  
> -	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
> +	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>  	r8168_mac_ocp_write(tp, 0xea80, 0x0003);
>  	r8168_mac_ocp_modify(tp, 0xe052, 0x0000, 0x0009);
>  	r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f);
> @@ -3715,7 +3715,7 @@ static void rtl_hw_start_8125_common(struct rtl8169_private *tp)
>  	r8168_mac_ocp_modify(tp, 0xc0b4, 0x0000, 0x000c);
>  	r8168_mac_ocp_modify(tp, 0xeb6a, 0x00ff, 0x0033);
>  	r8168_mac_ocp_modify(tp, 0xeb50, 0x03e0, 0x0040);
> -	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0030);
> +	r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>  	r8168_mac_ocp_modify(tp, 0xe040, 0x1000, 0x0000);
>  	r8168_mac_ocp_modify(tp, 0xea1c, 0x0003, 0x0001);
>  	if (tp->mac_version == RTL_GIGA_MAC_VER_70 ||
RE: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Hau 3 weeks, 6 days ago 
> 
> On 9/4/2025 4:11 AM, ChunHao Lin wrote:
> > EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE
> > speed down rate. The larger this value is, the more power can save.
> > But it actually save less power then expected, but will impact
> > compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) to improve
> compatibility.
> >
> Hi Hau,
> 
> what kind of speed is this referring to? Some clock, or link speed, or ..?
> Is EEE speed down a Realtek-specific feature?
> 
> Are there known issues with the values used currently? Depending on the
> answer we might consider this a fix.
> 
It means clock (MAC MCU) speed down. It is not from spec, so it is kind of Realtek specific feature.
It may cause packet drop or interrupt loss (different hardware may have different issue).

> 
> > Signed-off-by: ChunHao Lin <hau@realtek.com>
> > ---
> >  drivers/net/ethernet/realtek/r8169_main.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/realtek/r8169_main.c
> > b/drivers/net/ethernet/realtek/r8169_main.c
> > index 9c601f271c02..e5427dfce268 100644
> > --- a/drivers/net/ethernet/realtek/r8169_main.c
> > +++ b/drivers/net/ethernet/realtek/r8169_main.c
> > @@ -3409,7 +3409,7 @@ static void rtl_hw_start_8168h_1(struct
> rtl8169_private *tp)
> >               r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
> >       }
> >
> > -     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
> > +     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
> >       r8168_mac_ocp_modify(tp, 0xe052, 0x6000, 0x8008);
> >       r8168_mac_ocp_modify(tp, 0xe0d6, 0x01ff, 0x017f);
> >       r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f); @@ -3514,7
> > +3514,7 @@ static void rtl_hw_start_8117(struct rtl8169_private *tp)
> >               r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
> >       }
> >
> > -     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
> > +     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
> >       r8168_mac_ocp_write(tp, 0xea80, 0x0003);
> >       r8168_mac_ocp_modify(tp, 0xe052, 0x0000, 0x0009);
> >       r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f); @@ -3715,7
> > +3715,7 @@ static void rtl_hw_start_8125_common(struct rtl8169_private
> *tp)
> >       r8168_mac_ocp_modify(tp, 0xc0b4, 0x0000, 0x000c);
> >       r8168_mac_ocp_modify(tp, 0xeb6a, 0x00ff, 0x0033);
> >       r8168_mac_ocp_modify(tp, 0xeb50, 0x03e0, 0x0040);
> > -     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0030);
> > +     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
> >       r8168_mac_ocp_modify(tp, 0xe040, 0x1000, 0x0000);
> >       r8168_mac_ocp_modify(tp, 0xea1c, 0x0003, 0x0001);
> >       if (tp->mac_version == RTL_GIGA_MAC_VER_70 ||
Re: [PATCH net-next] r8169: set EEE speed down ratio to 1
Posted by Heiner Kallweit 3 weeks, 6 days ago 
On 9/5/2025 3:43 PM, Hau wrote:
>>
>> On 9/4/2025 4:11 AM, ChunHao Lin wrote:
>>> EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE
>>> speed down rate. The larger this value is, the more power can save.
>>> But it actually save less power then expected, but will impact
>>> compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) to improve
>> compatibility.
>>>
>> Hi Hau,
>>
>> what kind of speed is this referring to? Some clock, or link speed, or ..?
>> Is EEE speed down a Realtek-specific feature?
>>
>> Are there known issues with the values used currently? Depending on the
>> answer we might consider this a fix.
>>
> It means clock (MAC MCU) speed down. It is not from spec, so it is kind of Realtek specific feature.
> It may cause packet drop or interrupt loss (different hardware may have different issue).
> 
Thanks, Hau!

>>
>>> Signed-off-by: ChunHao Lin <hau@realtek.com>
>>> ---
>>>  drivers/net/ethernet/realtek/r8169_main.c | 6 +++---
>>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>>> b/drivers/net/ethernet/realtek/r8169_main.c
>>> index 9c601f271c02..e5427dfce268 100644
>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>> @@ -3409,7 +3409,7 @@ static void rtl_hw_start_8168h_1(struct
>> rtl8169_private *tp)
>>>               r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
>>>       }
>>>
>>> -     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
>>> +     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>>>       r8168_mac_ocp_modify(tp, 0xe052, 0x6000, 0x8008);
>>>       r8168_mac_ocp_modify(tp, 0xe0d6, 0x01ff, 0x017f);
>>>       r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f); @@ -3514,7
>>> +3514,7 @@ static void rtl_hw_start_8117(struct rtl8169_private *tp)
>>>               r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
>>>       }
>>>
>>> -     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
>>> +     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>>>       r8168_mac_ocp_write(tp, 0xea80, 0x0003);
>>>       r8168_mac_ocp_modify(tp, 0xe052, 0x0000, 0x0009);
>>>       r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f); @@ -3715,7
>>> +3715,7 @@ static void rtl_hw_start_8125_common(struct rtl8169_private
>> *tp)
>>>       r8168_mac_ocp_modify(tp, 0xc0b4, 0x0000, 0x000c);
>>>       r8168_mac_ocp_modify(tp, 0xeb6a, 0x00ff, 0x0033);
>>>       r8168_mac_ocp_modify(tp, 0xeb50, 0x03e0, 0x0040);
>>> -     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0030);
>>> +     r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>>>       r8168_mac_ocp_modify(tp, 0xe040, 0x1000, 0x0000);
>>>       r8168_mac_ocp_modify(tp, 0xea1c, 0x0003, 0x0001);
>>>       if (tp->mac_version == RTL_GIGA_MAC_VER_70 ||
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.