Add clock controller nodes for PERIC0 and PERIC1 blocks for USI nodes.

Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
---
 arch/arm64/boot/dts/exynos/exynos990.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
index dd7f99f51a75412f5c3b91c3425a63652546fa5e..418fc59fd9e9122f3059482276d3388920fab382 100644
--- a/arch/arm64/boot/dts/exynos/exynos990.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -225,12 +225,34 @@ gic: interrupt-controller@10101000 {
 			#size-cells = <1>;
 		};
 
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos990-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		pinctrl_peric0: pinctrl@10430000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10430000 0x1000>;
 			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos990-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		pinctrl_peric1: pinctrl@10730000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10730000 0x1000>;

-- 
2.50.1

On Thu, 04 Sep 2025 14:07:14 +0000, Denzeel Oliva wrote:
> Add clock controller nodes for PERIC0 and PERIC1 blocks for USI nodes.
> 
> 

Applied, thanks!

[4/4] arm64: dts: exynos990: Enable PERIC0 and PERIC1 clock controllers
      https://git.kernel.org/krzk/linux/c/44b0a8e433aaad8aac51593a052f043aeb9a18d1

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>