On Thu, Sep 04, 2025 at 04:36:49PM +0800, Peng Fan wrote:
> Support TJA105{1,7} which are a single channel high-speed CAN transceiver
> with silent mode supported.
>
> phy mode is not implemented as of now. silent settings are kept in
> phy_power_on and phy_power_off. After phy mode is supported, the silent
> settings could be moved to phy_set_mode.
nit: function need "()". phy_power_on()
Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/phy/phy-can-transceiver.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
> index ccb29e1dfe0d07005b4bcd8fefa2787292d921a0..d9fd3564970695d5460ffdc4e8636dd7638d64a2 100644
> --- a/drivers/phy/phy-can-transceiver.c
> +++ b/drivers/phy/phy-can-transceiver.c
> @@ -18,10 +18,12 @@ struct can_transceiver_data {
> #define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
> #define CAN_TRANSCEIVER_EN_PRESENT BIT(1)
> #define CAN_TRANSCEIVER_DUAL_CH BIT(2)
> +#define CAN_TRANSCEIVER_SILENT_PRESENT BIT(3)
> };
>
> struct can_transceiver_phy {
> struct phy *generic_phy;
> + struct gpio_desc *silent_gpio;
> struct gpio_desc *standby_gpio;
> struct gpio_desc *enable_gpio;
> struct can_transceiver_priv *priv;
> @@ -47,6 +49,10 @@ static int can_transceiver_phy_power_on(struct phy *phy)
> }
> }
>
> + ret = gpiod_set_value_cansleep(can_transceiver_phy->silent_gpio, 0);
> + if (ret)
> + return ret;
> +
> ret = gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
> if (ret)
> return ret;
> @@ -60,6 +66,10 @@ static int can_transceiver_phy_power_off(struct phy *phy)
> struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
> int ret;
>
> + ret = gpiod_set_value_cansleep(can_transceiver_phy->silent_gpio, 1);
> + if (ret)
> + return ret;
> +
> ret = gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
> if (ret)
> return ret;
> @@ -92,6 +102,14 @@ static const struct can_transceiver_data tja1048_drvdata = {
> .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_DUAL_CH,
> };
>
> +static const struct can_transceiver_data tja1051_drvdata = {
> + .flags = CAN_TRANSCEIVER_SILENT_PRESENT | CAN_TRANSCEIVER_EN_PRESENT,
> +};
> +
> +static const struct can_transceiver_data tja1057_drvdata = {
> + .flags = CAN_TRANSCEIVER_SILENT_PRESENT,
> +};
> +
> static const struct of_device_id can_transceiver_phy_ids[] = {
> {
> .compatible = "ti,tcan1042",
> @@ -105,6 +123,14 @@ static const struct of_device_id can_transceiver_phy_ids[] = {
> .compatible = "nxp,tja1048",
> .data = &tja1048_drvdata
> },
> + {
> + .compatible = "nxp,tja1051",
> + .data = &tja1051_drvdata
> + },
> + {
> + .compatible = "nxp,tja1057",
> + .data = &tja1057_drvdata
> + },
> {
> .compatible = "nxp,tjr1443",
> .data = &tcan1043_drvdata
> @@ -150,6 +176,7 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
> const struct can_transceiver_data *drvdata;
> const struct of_device_id *match;
> struct phy *phy;
> + struct gpio_desc *silent_gpio;
> struct gpio_desc *standby_gpio;
> struct gpio_desc *enable_gpio;
> struct mux_state *mux_state;
> @@ -213,6 +240,14 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
> priv->can_transceiver_phy[i].enable_gpio = enable_gpio;
> }
>
> + if (drvdata->flags & CAN_TRANSCEIVER_SILENT_PRESENT) {
> + silent_gpio = devm_gpiod_get_index_optional(dev, "silent", i,
> + GPIOD_OUT_LOW);
> + if (IS_ERR(silent_gpio))
> + return PTR_ERR(silent_gpio);
> + priv->can_transceiver_phy[i].silent_gpio = silent_gpio;
> + }
> +
> phy_set_drvdata(priv->can_transceiver_phy[i].generic_phy,
> &priv->can_transceiver_phy[i]);
> }
>
> --
> 2.37.1
>