Whenever can_validate_bittiming() is called, it is always preceded by
some boilerplate code which was copy pasted all over the place. Move
that repeated code directly inside can_validate_bittiming().

Finally, the mempcy() is not needed. Just use the pointer returned by
nla_data() as-is.

Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
 drivers/net/can/dev/netlink.c | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index d9f6ab3efb9767409c318b714f19df8a30e51137..bc91df8d75ac41381fefea895d7e490a965d3f7b 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -36,13 +36,20 @@ static const struct nla_policy can_tdc_policy[IFLA_CAN_TDC_MAX + 1] = {
 	[IFLA_CAN_TDC_TDCF] = { .type = NLA_U32 },
 };
 
-static int can_validate_bittiming(const struct can_bittiming *bt,
-				  struct netlink_ext_ack *extack)
+static int can_validate_bittiming(struct nlattr *data[],
+				  struct netlink_ext_ack *extack,
+				  int ifla_can_bittiming)
 {
+	struct can_bittiming *bt;
+
+	if (!data[ifla_can_bittiming])
+		return 0;
+
+	bt = nla_data(data[ifla_can_bittiming]);
+
 	/* sample point is in one-tenth of a percent */
 	if (bt->sample_point >= 1000) {
 		NL_SET_ERR_MSG(extack, "sample point must be between 0 and 100%");
-
 		return -EINVAL;
 	}
 
@@ -105,14 +112,9 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
 		}
 	}
 
-	if (data[IFLA_CAN_BITTIMING]) {
-		struct can_bittiming bt;
-
-		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
-		err = can_validate_bittiming(&bt, extack);
-		if (err)
-			return err;
-	}
+	err = can_validate_bittiming(data, extack, IFLA_CAN_BITTIMING);
+	if (err)
+		return err;
 
 	if (is_can_fd) {
 		if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
@@ -124,14 +126,9 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
 			return -EOPNOTSUPP;
 	}
 
-	if (data[IFLA_CAN_DATA_BITTIMING]) {
-		struct can_bittiming bt;
-
-		memcpy(&bt, nla_data(data[IFLA_CAN_DATA_BITTIMING]), sizeof(bt));
-		err = can_validate_bittiming(&bt, extack);
-		if (err)
-			return err;
-	}
+	err = can_validate_bittiming(data, extack, IFLA_CAN_DATA_BITTIMING);
+	if (err)
+		return err;
 
 	return 0;
 }

-- 
2.49.1