Add the drive stregth, schmitt trigger enable macros to pinctrl file.
Add the missing macros for DeepSleep configuration control referenced
from "Table 14-6172. Description Of The Pad Configuration Register Bits"
in AM625 TRM[0].
Add some DeepSleep macros to provide combinations that can be used
directly in device tree files example PIN_DS_OUTPUT_LOW that
configures pin to be output and also sets its value to 0.

[0] https://www.ti.com/lit/ug/spruiv7b/spruiv7b.pdf

Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
---
 arch/arm64/boot/dts/ti/k3-pinctrl.h | 55 +++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c0f09be8d3f94..ad53880b0dda0 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -3,15 +3,20 @@
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
  */
 #ifndef DTS_ARM64_TI_K3_PINCTRL_H
 #define DTS_ARM64_TI_K3_PINCTRL_H
 
+#define WKUP_LVL_EN_SHIFT       (7)
+#define WKUP_LVL_POL_SHIFT      (8)
 #define ST_EN_SHIFT		(14)
 #define PULLUDEN_SHIFT		(16)
 #define PULLTYPESEL_SHIFT	(17)
 #define RXACTIVE_SHIFT		(18)
+#define DRV_STR_SHIFT           (19)
+#define DS_ISO_OVERRIDE_EN_SHIFT(22)
+#define DS_ISO_BYPASS_EN_SHIFT  (23)
 #define DEBOUNCE_SHIFT		(11)
 #define FORCE_DS_EN_SHIFT	(15)
 #define DS_EN_SHIFT		(24)
@@ -19,6 +24,7 @@
 #define DS_OUT_VAL_SHIFT	(26)
 #define DS_PULLUD_EN_SHIFT	(27)
 #define DS_PULLTYPE_SEL_SHIFT	(28)
+#define WKUP_EN_SHIFT           (29)
 
 /* Schmitt trigger configuration */
 #define ST_DISABLE		(0 << ST_EN_SHIFT)
@@ -33,6 +39,26 @@
 #define INPUT_EN		(1 << RXACTIVE_SHIFT)
 #define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
 
+#define DS_PULL_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
+#define DS_PULL_ENABLE		(0 << DS_PULLUD_EN_SHIFT)
+
+#define DS_PULL_UP              (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+#define DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+
+#define DS_INPUT_EN             (1 << DS_OUT_DIS_SHIFT)
+#define DS_INPUT_DISABLE        (0 << DS_OUT_DIS_SHIFT)
+
+#define DS_OUT_VALUE_ZERO       (0 << DS_OUT_VAL_SHIFT)
+#define DS_OUT_VALUE_ONE        (1 << DS_OUT_VAL_SHIFT)
+
+#define WKUP_ENABLE             (1 << WKUP_EN_SHIFT)
+#define WKUP_ON_LEVEL		(1 << WKUP_LVL_EN_SHIFT)
+#define WKUP_ON_EDGE            (0 << WKUP_LVL_EN_SHIFT)
+#define WKUP_LEVEL_LOW          (0 << WKUP_LVL_POL_SHIFT)
+#define WKUP_LEVEL_HIGH		(1 << WKUP_LVL_POL_SHIFT)
+
+#define WKUP_DISABLE            (0 << WKUP_EN_SHIFT)
+
 /* Only these macros are expected be used directly in device tree files */
 #define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
 #define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
@@ -53,18 +79,41 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+#define PIN_DRIVE_STRENGTH_NOMINAL      (0 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_SLOW         (1 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_FAST         (2 << DRV_STR_SHIFT)
+
+#define PIN_SCHMITT_TRIGGER_DISABLE	(0 << ST_EN_SHIFT)
+#define PIN_SCHMITT_TRIGGER_ENABLE	(1 << ST_EN_SHIFT)
+
 #define PIN_DS_FORCE_DISABLE		(0 << FORCE_DS_EN_SHIFT)
 #define PIN_DS_FORCE_ENABLE		(1 << FORCE_DS_EN_SHIFT)
 #define PIN_DS_IO_OVERRIDE_DISABLE	(0 << DS_IO_OVERRIDE_EN_SHIFT)
 #define PIN_DS_IO_OVERRIDE_ENABLE	(1 << DS_IO_OVERRIDE_EN_SHIFT)
-#define PIN_DS_OUT_ENABLE		(0 << DS_OUT_DIS_SHIFT)
-#define PIN_DS_OUT_DISABLE		(1 << DS_OUT_DIS_SHIFT)
+#define PIN_DS_OUT_ENABLE		DS_INPUT_DISABLE
+#define PIN_DS_OUT_DISABLE		DS_INPUT_EN
 #define PIN_DS_OUT_VALUE_ZERO		(0 << DS_OUT_VAL_SHIFT)
 #define PIN_DS_OUT_VALUE_ONE		(1 << DS_OUT_VAL_SHIFT)
 #define PIN_DS_PULLUD_ENABLE		(0 << DS_PULLUD_EN_SHIFT)
 #define PIN_DS_PULLUD_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
 #define PIN_DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT)
 #define PIN_DS_PULL_UP			(1 << DS_PULLTYPE_SEL_SHIFT)
+#define PIN_DS_ISO_BYPASS               (1 << DS_ISO_BYPASS_EN_SHIFT)
+#define PIN_DS_ISO_BYPASS_DISABLE       (0 << DS_ISO_BYPASS_EN_SHIFT)
+
+#define DS_STATE_VAL                    (1 << DS_EN_SHIFT)
+#define ACTIVE_STATE_VAL                (0 << DS_EN_SHIFT)
+
+#define PIN_DS_OUTPUT_LOW               (DS_STATE_VAL | DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO)
+#define PIN_DS_OUTPUT_HIGH              (DS_STATE_VAL | DS_INPUT_DISABLE | DS_OUT_VALUE_ONE)
+#define PIN_DS_INPUT                    (DS_STATE_VAL | DS_INPUT_EN | DS_PULL_DISABLE)
+#define PIN_DS_INPUT_PULLUP             (DS_STATE_VAL | DS_INPUT_EN | DS_PULL_UP)
+#define PIN_DS_INPUT_PULLDOWN           (DS_STATE_VAL | DS_INPUT_EN | DS_PULL_DOWN)
+
+#define PIN_WKUP_EN_EDGE                (WKUP_ENABLE | WKUP_ON_EDGE)
+#define PIN_WKUP_EN_LEVEL_LOW	        (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW)
+#define PIN_WKUP_EN_LEVEL_HIGH	        (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH)
+#define PIN_WKUP_EN                     WKUP_EN_EDGE
 
 /* Default mux configuration for gpio-ranges to use with pinctrl */
 #define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)
-- 
2.34.1

Hi Akashdeep,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.17-rc4 next-20250901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Akashdeep-Kaur/arm64-dts-ti-k3-am62p5-sk-Remove-the-unused-config-from-USB1_DRVVBUS/20250901-203422
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20250901122835.3022850-4-a-kaur%40ti.com
patch subject: [PATCH v2 3/3] arm64: dts: ti: k3-pinctrl: Add the remaining macros
config: arm64-randconfig-053-20250901 (https://download.01.org/0day-ci/archive/20250902/202509020155.fcjWQKFc-lkp@intel.com/config)
compiler: clang version 22.0.0git (https://github.com/llvm/llvm-project 2e122990391b2ba062e6308a12cfedf7206270ba)
dtschema version: 2025.6.2.dev4+g8f79ddd
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250902/202509020155.fcjWQKFc-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202509020155.fcjWQKFc-lkp@intel.com/

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts:14:
   In file included from arch/arm64/boot/dts/ti/k3-am625.dtsi:12:
   In file included from arch/arm64/boot/dts/ti/k3-am62.dtsi:13:
>> arch/arm64/boot/dts/ti/k3-pinctrl.h:18:34: error: invalid token in macro parameter list
      18 | #define DS_ISO_OVERRIDE_EN_SHIFT(22)
         |                                  ^
   1 error generated.


vim +18 arch/arm64/boot/dts/ti/k3-pinctrl.h

    10	
    11	#define WKUP_LVL_EN_SHIFT       (7)
    12	#define WKUP_LVL_POL_SHIFT      (8)
    13	#define ST_EN_SHIFT		(14)
    14	#define PULLUDEN_SHIFT		(16)
    15	#define PULLTYPESEL_SHIFT	(17)
    16	#define RXACTIVE_SHIFT		(18)
    17	#define DRV_STR_SHIFT           (19)
  > 18	#define DS_ISO_OVERRIDE_EN_SHIFT(22)
    19	#define DS_ISO_BYPASS_EN_SHIFT  (23)
    20	#define DEBOUNCE_SHIFT		(11)
    21	#define FORCE_DS_EN_SHIFT	(15)
    22	#define DS_EN_SHIFT		(24)
    23	#define DS_OUT_DIS_SHIFT	(25)
    24	#define DS_OUT_VAL_SHIFT	(26)
    25	#define DS_PULLUD_EN_SHIFT	(27)
    26	#define DS_PULLTYPE_SEL_SHIFT	(28)
    27	#define WKUP_EN_SHIFT           (29)
    28	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki