Hi Guoniu,
Thank you for the patch.
On Mon, Sep 01, 2025 at 02:25:31PM +0800, Guoniu Zhou wrote:
> Call reset_control_deassert() to explicitly release reset to make sure
> reset bits are cleared since platform like i.MX8ULP can't clear reset
> bits automatically.
>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
> ---
> drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> index 2bf11984690af2e687a3217e465697333d9d995d..6b83aa85af42e1dac25cf29056863680c1f89402 100644
> --- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> +++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> @@ -337,18 +337,14 @@ static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
> {
> int ret;
>
> - /*
> - * these are most likely self-clearing reset bits. to make it
> - * more clear, the reset-imx7 driver should implement the
> - * .reset() operation.
What happened to this plan, would it be feasible to implement the
.reset() operation in the relevant drivers to be able to use
reset_control_reset() here ?
> - */
> ret = reset_control_assert(state->rst);
> if (ret < 0) {
> dev_err(state->dev, "Failed to assert resets: %d\n", ret);
> return ret;
> }
>
> - return 0;
> + /* Explicitly release reset to make sure reset bits are cleared. */
> + return reset_control_deassert(state->rst);
> }
>
> static void imx8mq_mipi_csi_set_params(struct csi_state *state)
--
Regards,
Laurent Pinchart