Add build options and doc for mucse.
Initialize pci device access for MUCSE devices.
Signed-off-by: Dong Yibo <dong100@mucse.com>
---
.../device_drivers/ethernet/index.rst | 1 +
.../device_drivers/ethernet/mucse/rnpgbe.rst | 21 +++
MAINTAINERS | 8 ++
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/mucse/Kconfig | 34 +++++
drivers/net/ethernet/mucse/Makefile | 7 +
drivers/net/ethernet/mucse/rnpgbe/Makefile | 8 ++
drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h | 24 ++++
.../net/ethernet/mucse/rnpgbe/rnpgbe_main.c | 126 ++++++++++++++++++
10 files changed, 231 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst
create mode 100644 drivers/net/ethernet/mucse/Kconfig
create mode 100644 drivers/net/ethernet/mucse/Makefile
create mode 100644 drivers/net/ethernet/mucse/rnpgbe/Makefile
create mode 100644 drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
create mode 100644 drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 0b0a3eef6aae..41ff2152b7aa 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -47,6 +47,7 @@ Contents:
mellanox/mlx5/index
meta/fbnic
microsoft/netvsc
+ mucse/rnpgbe
neterion/s2io
netronome/nfp
pensando/ionic
diff --git a/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst b/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst
new file mode 100644
index 000000000000..7562fb6b8f61
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst
@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================
+Linux Base Driver for MUCSE(R) Gigabit PCI Express Adapters
+===========================================================
+
+MUCSE Gigabit Linux driver.
+Copyright (c) 2020 - 2025 MUCSE Co.,Ltd.
+
+Identifying Your Adapter
+========================
+The driver is compatible with devices based on the following:
+
+ * MUCSE(R) Ethernet Controller N500 series
+ * MUCSE(R) Ethernet Controller N210 series
+
+Support
+=======
+ If you have problems with the software or hardware, please contact our
+ customer support team via email at techsupport@mucse.com or check our
+ website at https://www.mucse.com/en/
diff --git a/MAINTAINERS b/MAINTAINERS
index bce96dd254b8..00b73e3631b4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17276,6 +17276,14 @@ T: git git://linuxtv.org/media.git
F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
F: drivers/media/i2c/mt9v111.c
+MUCSE ETHERNET DRIVER
+M: Yibo Dong <dong100@mucse.com>
+L: netdev@vger.kernel.org
+S: Maintained
+W: https://www.mucse.com/en/
+F: Documentation/networking/device_drivers/ethernet/mucse/
+F: drivers/net/ethernet/mucse/
+
MULTIFUNCTION DEVICES (MFD)
M: Lee Jones <lee@kernel.org>
S: Maintained
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index f86d4557d8d7..167388f9c744 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -129,6 +129,7 @@ source "drivers/net/ethernet/microchip/Kconfig"
source "drivers/net/ethernet/mscc/Kconfig"
source "drivers/net/ethernet/microsoft/Kconfig"
source "drivers/net/ethernet/moxa/Kconfig"
+source "drivers/net/ethernet/mucse/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
config FEALNX
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 67182339469a..1b8c4df3f594 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
obj-$(CONFIG_NET_VENDOR_MICROSEMI) += mscc/
obj-$(CONFIG_NET_VENDOR_MOXART) += moxa/
+obj-$(CONFIG_NET_VENDOR_MUCSE) += mucse/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
diff --git a/drivers/net/ethernet/mucse/Kconfig b/drivers/net/ethernet/mucse/Kconfig
new file mode 100644
index 000000000000..be0fdf268484
--- /dev/null
+++ b/drivers/net/ethernet/mucse/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Mucse network device configuration
+#
+
+config NET_VENDOR_MUCSE
+ bool "Mucse devices"
+ default y
+ help
+ If you have a network (Ethernet) card from Mucse(R), say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Mucse(R) cards. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+if NET_VENDOR_MUCSE
+
+config MGBE
+ tristate "Mucse(R) 1GbE PCI Express adapters support"
+ depends on PCI
+ select PAGE_POOL
+ help
+ This driver supports Mucse(R) 1GbE PCI Express family of
+ adapters.
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called rnpgbe.
+
+endif # NET_VENDOR_MUCSE
+
diff --git a/drivers/net/ethernet/mucse/Makefile b/drivers/net/ethernet/mucse/Makefile
new file mode 100644
index 000000000000..675173fa05f7
--- /dev/null
+++ b/drivers/net/ethernet/mucse/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 - 2025 MUCSE Corporation.
+#
+# Makefile for the MUCSE(R) network device drivers
+#
+
+obj-$(CONFIG_MGBE) += rnpgbe/
diff --git a/drivers/net/ethernet/mucse/rnpgbe/Makefile b/drivers/net/ethernet/mucse/rnpgbe/Makefile
new file mode 100644
index 000000000000..9df536f0d04c
--- /dev/null
+++ b/drivers/net/ethernet/mucse/rnpgbe/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 - 2025 MUCSE Corporation.
+#
+# Makefile for the MUCSE(R) 1GbE PCI Express ethernet driver
+#
+
+obj-$(CONFIG_MGBE) += rnpgbe.o
+rnpgbe-objs := rnpgbe_main.o
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
new file mode 100644
index 000000000000..64b2c093bc6e
--- /dev/null
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2020 - 2025 Mucse Corporation. */
+
+#ifndef _RNPGBE_H
+#define _RNPGBE_H
+
+enum rnpgbe_boards {
+ board_n500,
+ board_n210,
+ board_n210L,
+};
+
+struct mucse {
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+};
+
+/* Device IDs */
+#define PCI_VENDOR_ID_MUCSE 0x8848
+#define PCI_DEVICE_ID_N500_QUAD_PORT 0x8308
+#define PCI_DEVICE_ID_N500_DUAL_PORT 0x8318
+#define PCI_DEVICE_ID_N210 0x8208
+#define PCI_DEVICE_ID_N210L 0x820a
+#endif /* _RNPGBE_H */
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
new file mode 100644
index 000000000000..98905607e74b
--- /dev/null
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2020 - 2025 Mucse Corporation. */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "rnpgbe.h"
+
+static const char rnpgbe_driver_name[] = "rnpgbe";
+
+/* rnpgbe_pci_tbl - PCI Device ID Table
+ *
+ * { PCI_DEVICE(Vendor ID, Device ID),
+ * driver_data (used for different hw chip) }
+ */
+static struct pci_device_id rnpgbe_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_QUAD_PORT),
+ .driver_data = board_n500},
+ { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_DUAL_PORT),
+ .driver_data = board_n500},
+ { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210),
+ .driver_data = board_n210},
+ { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210L),
+ .driver_data = board_n210L},
+ /* required last entry */
+ {0, },
+};
+
+/**
+ * rnpgbe_probe - Device initialization routine
+ * @pdev: PCI device information struct
+ * @id: entry in rnpgbe_pci_tbl
+ *
+ * rnpgbe_probe initializes a PF adapter identified by a pci_dev
+ * structure.
+ *
+ * Return: 0 on success, negative errno on failure
+ **/
+static int rnpgbe_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int err;
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(56));
+ if (err) {
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting %d\n", err);
+ goto err_disable_dev;
+ }
+
+ err = pci_request_mem_regions(pdev, rnpgbe_driver_name);
+ if (err) {
+ dev_err(&pdev->dev,
+ "pci_request_selected_regions failed %d\n", err);
+ goto err_disable_dev;
+ }
+
+ pci_set_master(pdev);
+ err = pci_save_state(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_save_state failed %d\n", err);
+ goto err_free_regions;
+ }
+
+ return 0;
+err_free_regions:
+ pci_release_mem_regions(pdev);
+err_disable_dev:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * rnpgbe_remove - Device removal routine
+ * @pdev: PCI device information struct
+ *
+ * rnpgbe_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. This could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void rnpgbe_remove(struct pci_dev *pdev)
+{
+ pci_release_mem_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * rnpgbe_dev_shutdown - Device shutdown routine
+ * @pdev: PCI device information struct
+ **/
+static void rnpgbe_dev_shutdown(struct pci_dev *pdev)
+{
+ pci_disable_device(pdev);
+}
+
+/**
+ * rnpgbe_shutdown - Device shutdown routine
+ * @pdev: PCI device information struct
+ *
+ * rnpgbe_shutdown is called by the PCI subsystem to alert the driver
+ * that os shutdown. Device should setup wakeup state here.
+ **/
+static void rnpgbe_shutdown(struct pci_dev *pdev)
+{
+ rnpgbe_dev_shutdown(pdev);
+}
+
+static struct pci_driver rnpgbe_driver = {
+ .name = rnpgbe_driver_name,
+ .id_table = rnpgbe_pci_tbl,
+ .probe = rnpgbe_probe,
+ .remove = rnpgbe_remove,
+ .shutdown = rnpgbe_shutdown,
+};
+
+module_pci_driver(rnpgbe_driver);
+
+MODULE_DEVICE_TABLE(pci, rnpgbe_pci_tbl);
+MODULE_AUTHOR("Mucse Corporation, <techsupport@mucse.com>");
+MODULE_DESCRIPTION("Mucse(R) 1 Gigabit PCI Express Network Driver");
+MODULE_LICENSE("GPL");
--
2.25.1On Thu, Aug 28, 2025 at 10:55:43AM +0800, Dong Yibo wrote:
> Add build options and doc for mucse.
> Initialize pci device access for MUCSE devices.
>
> Signed-off-by: Dong Yibo <dong100@mucse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
On Thu, Aug 28, 2025 at 02:51:07PM +0200, Andrew Lunn wrote: > On Thu, Aug 28, 2025 at 10:55:43AM +0800, Dong Yibo wrote: Hi, Andrew: > > Add build options and doc for mucse. > > Initialize pci device access for MUCSE devices. > > > > Signed-off-by: Dong Yibo <dong100@mucse.com> > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > > Andrew > Should I add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>' to commit for [PATCH 1/5] in the next version? Thanks for your review.
On 01/09/2025 09:20, Yibo Dong wrote: > On Thu, Aug 28, 2025 at 02:51:07PM +0200, Andrew Lunn wrote: >> On Thu, Aug 28, 2025 at 10:55:43AM +0800, Dong Yibo wrote: > > Hi, Andrew: > >>> Add build options and doc for mucse. >>> Initialize pci device access for MUCSE devices. >>> >>> Signed-off-by: Dong Yibo <dong100@mucse.com> >> >> Reviewed-by: Andrew Lunn <andrew@lunn.ch> >> >> Andrew >> > > Should I add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>' to commit for > [PATCH 1/5] in the next version? The general rule is to carry over all the tags if there is no (big) changes to the code in the patch.
On Mon, Sep 01, 2025 at 10:58:48AM +0100, Vadim Fedorenko wrote: > On 01/09/2025 09:20, Yibo Dong wrote: > > On Thu, Aug 28, 2025 at 02:51:07PM +0200, Andrew Lunn wrote: > > > On Thu, Aug 28, 2025 at 10:55:43AM +0800, Dong Yibo wrote: > > > > Hi, Andrew: > > > > > > Add build options and doc for mucse. > > > > Initialize pci device access for MUCSE devices. > > > > > > > > Signed-off-by: Dong Yibo <dong100@mucse.com> > > > > > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > > > > > > Andrew > > > > > > > Should I add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>' to commit for > > [PATCH 1/5] in the next version? > > The general rule is to carry over all the tags if there is no (big) > changes to the code in the patch. > Got it, thanks.
© 2016 - 2025 Red Hat, Inc.