On Thu, Aug 28, 2025 at 11:14:46AM +0100, James Clark wrote:
> This erratum only ever results in a max value of 1, otherwise the full 3
> bits are available. To avoid repeating the same default prescale value
> for every new device's devdata, treat 0 as no limit (7) and only set a
> value when the erratum is present.
>
> Change the field to be 3 bits to catch out of range definitions.
>
> No functionality change.
>
> Signed-off-by: James Clark <james.clark@linaro.org>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/spi/spi-fsl-lpspi.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
> index f16449cf42bb..ea25e8dab0a4 100644
> --- a/drivers/spi/spi-fsl-lpspi.c
> +++ b/drivers/spi/spi-fsl-lpspi.c
> @@ -86,7 +86,7 @@
> #define SR_CLEAR_MASK GENMASK(13, 8)
>
> struct fsl_lpspi_devtype_data {
> - u8 prescale_max;
> + u8 prescale_max : 3; /* 0 == no limit */
> };
>
> struct lpspi_config {
> @@ -132,15 +132,15 @@ struct fsl_lpspi_data {
> };
>
> /*
> - * ERR051608 fixed or not:
> - * https://www.nxp.com/docs/en/errata/i.MX93_1P87f.pdf
> + * Devices with ERR051608 have a max TCR_PRESCALE value of 1, otherwise there is
> + * no prescale limit: https://www.nxp.com/docs/en/errata/i.MX93_1P87f.pdf
> */
> static const struct fsl_lpspi_devtype_data imx93_lpspi_devtype_data = {
> .prescale_max = 1,
> };
>
> static const struct fsl_lpspi_devtype_data imx7ulp_lpspi_devtype_data = {
> - .prescale_max = 7,
> + /* All defaults */
> };
>
> static const struct of_device_id fsl_lpspi_dt_ids[] = {
> @@ -324,7 +324,7 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
> int scldiv;
>
> perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
> - prescale_max = fsl_lpspi->devtype_data->prescale_max;
> + prescale_max = fsl_lpspi->devtype_data->prescale_max ?: 7;
>
> if (!config.speed_hz) {
> dev_err(fsl_lpspi->dev,
>
> --
> 2.34.1
>