Fix spelling errors in some comments.

Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
---
 drivers/i2c/busses/i2c-hix5hd2.c    | 2 +-
 drivers/i2c/busses/i2c-sprd.c       | 2 +-
 drivers/i2c/busses/i2c-st.c         | 2 +-
 drivers/i2c/busses/i2c-viperboard.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 370f32974763..5358f5ddf924 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -339,7 +339,7 @@ static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
 	ret = priv->state;
 
 	/*
-	 * If this is the last message to be transfered (stop == 1)
+	 * If this is the last message to be transferred (stop == 1)
 	 * Then check if the bus can be brought back to idle.
 	 */
 	if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop)
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 56b2e5c5fb49..26ec34b19ad5 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -425,7 +425,7 @@ static irqreturn_t sprd_i2c_isr(int irq, void *dev_id)
 	 * If we did not get one ACK from target when writing data, then we
 	 * should finish this transmission since we got some errors.
 	 *
-	 * When writing data, if i2c_tran == 0 which means we have writen
+	 * When writing data, if i2c_tran == 0 which means we have written
 	 * done all data, then we can finish this transmission.
 	 *
 	 * When reading data, if conut < rx fifo full threshold, which
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index bf28f8e3ee6b..97d70e667227 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -152,7 +152,7 @@ struct st_i2c_timings {
 /**
  * struct st_i2c_client - client specific data
  * @addr: 8-bit target addr, including r/w bit
- * @count: number of bytes to be transfered
+ * @count: number of bytes to be transferred
  * @xfered: number of bytes already transferred
  * @buf: data buffer
  * @result: result of the transfer
diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
index 1bd602852e35..f596efcc291c 100644
--- a/drivers/i2c/busses/i2c-viperboard.c
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -204,7 +204,7 @@ static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
 		/* copy the received data */
 		memcpy(msg->buf + start, rmsg, len1);
 
-		/* second read transfer if neccessary */
+		/* second read transfer if necessary */
 		if (len2 > 0) {
 			ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2);
 			if (ret < 0)
-- 
2.34.1

On Wed, Aug 27, 2025 at 05:43:44PM +0800, Xichao Zhao wrote:
> Fix spelling errors in some comments.
> 
> Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>

Applied to for-next, thanks!