Add support for Qualcomm's Monaco Evaluation Kit (EVK) without
safety monitoring feature of Safety Island(SAIL) subsystem.
This board is based on Qualcomm's QCS8300 SoC.

Monaco EVK board is a single board computer (SBC) that supports various
industrial applications, including factory automation, industrial
robots, drones, edge AI boxes, machine vision, autonomous mobile
robots (AMRs), and industrial gateways.

Dependency:
  - Revert commit b5323835f050 ("OPP: Reorganize _opp_table_find_key()") to
    avoid regression introduced in linux-next (20250825).
  - The ethernet PHY QCA8081 depends on CONFIG_QCA808X_PHY, without
    which ethernet will not work.
---
Changelog:

v3:
  - Include changelog in proper format and make it more verbose [Krzysztof].
  - Fix subject line of dt-bindings change [Krzysztof].
  - Move the H/W peripheral information added in cover letter to commit text
    of Board DT change [Krzysztof].
  - Include 'qcs8300-pmics.dtsi' in the Board DT [Dmitry].
  - Enable below peripherals as suggested by Dmitry and Konrad to include more
    peripherals in this series itself :
      - GPI (Generic Peripheral Interface) DMA controllers and QUPv3 controllers
        for peripheral communication.
      - I2C based devices like GPIO I/O expander and EEPROM.
      - USB1 controller in device mode.
      - Re-enable Remoteproc subsystems ADSP, CDSP & GPDSP as fix [3] is
        merged.
      - Qca8081 2.5G Ethernet PHY.
      - Iris video decoder.
  - Update the Board DT change commit text to reflect the above
    newly added peripherals changes.
  - v2-link: [2]

v2:
  - Address Bjorn's comment to rename the board filename and
    compatible to monaco-evk.
  - Include the bindings for monaco-evk with the existing qcs8300-soc
    itself instead of adding a new SoC binding.
  - Drop remoteproc support as qcom remoteproc driver is currently
    broken in upstream [3]
  - v1-link: [1]

[1] https://lore.kernel.org/all/20250623130420.3981916-1-umang.chheda@oss.qualcomm.com/
[2] https://lore.kernel.org/all/b376d130-2816-42b1-a8c1-1962ee0c2cd7@oss.qualcomm.com/
[3] https://lore.kernel.org/all/20250804-mdtloader-changes-v1-3-5e74629a2241@oss.qualcomm.com/

---
Umang Chheda (2):
  dt-bindings: arm: qcom: Add Monaco EVK support
  arm64: dts: qcom: Add Monaco EVK initial board support

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/monaco-evk.dts       | 490 ++++++++++++++++++
 2 files changed, 491 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk.dts

--
2.34.1