From: Fenglin Wu <fenglin.wu@oss.qualcomm.com>

Add nvmem properties to retrieve charge control configurations
from the PMIC SDAM registers.

Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
---
 .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index 4c9e78f29523e3d77aacb4299f64ab96f9b1a831..9d6db4825da389aa14d77f653d2f8a3442e22162 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -55,6 +55,20 @@ properties:
       The array should contain a gpio entry for each PMIC Glink connector, in reg order.
       It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
 
+  nvmem-cells:
+    minItems: 3
+    maxItems: 3
+    description:
+      The nvmem cells contain the charge control settings, including the charge control
+      enable status, the battery state of charge (SoC) threshold for stopping charging,
+      and the battery SoC delta required to restart charging.
+
+  nvmem-cell-names:
+    items:
+      - const: charge_limit_en
+      - const: charge_limit_end
+      - const: charge_limit_delta
+
 patternProperties:
   '^connector@\d$':
     $ref: /schemas/connector/usb-connector.yaml#

-- 
2.34.1

On Tue, 26 Aug 2025 15:18:33 +0800, Fenglin Wu wrote:
> Add nvmem properties to retrieve charge control configurations
> from the PMIC SDAM registers.
> 
> Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml      | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>