Fix the current check for number of channels (child nodes in the device
tree). Before, this was:
if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)
RTL9300_I2C_MUX_NCHAN gives the maximum number of channels so checking
with '>=' isn't correct because it doesn't allow the last channel
number. Thus, fix it to:
if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)
Issue occured on a TP-Link TL-ST1008F v2.0 device (8 SFP+ ports) and fix
is tested there.
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
---
drivers/i2c/busses/i2c-rtl9300.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c
index 4b215f9a24e6..19c367703eaf 100644
--- a/drivers/i2c/busses/i2c-rtl9300.c
+++ b/drivers/i2c/busses/i2c-rtl9300.c
@@ -382,7 +382,7 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
- if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)
+ if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)
return dev_err_probe(dev, -EINVAL, "Too many channels\n");
device_for_each_child_node(dev, child) {
--
2.48.1