[PATCH v2 0/9] Fix, extend and support OF to mc13xxx pwrbutton

Alexander Kurz posted 9 patches 1 month, 1 week ago
There is a newer version of this series
.../devicetree/bindings/mfd/fsl,mc13xxx.yaml  | 272 ++++++++++++++++++
.../devicetree/bindings/mfd/mc13xxx.txt       | 156 ----------
.../dts/nxp/imx/imx27-phytec-phycore-som.dtsi |   2 +-
arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts  |   2 +-
.../boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts  |   2 +-
.../boot/dts/nxp/imx/imx51-zii-scu3-esb.dts   |   2 +-
drivers/input/misc/Kconfig                    |   4 +-
drivers/input/misc/mc13783-pwrbutton.c        | 235 +++++++++++----
drivers/leds/leds-mc13783.c                   |   2 +-
include/linux/mfd/mc13783.h                   |   4 +-
include/linux/mfd/mc13xxx.h                   |  10 +-
11 files changed, 461 insertions(+), 230 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/mc13xxx.txt
[PATCH v2 0/9] Fix, extend and support OF to mc13xxx pwrbutton
Posted by Alexander Kurz 1 month, 1 week ago
Goal of this patch series is to make the mc13892 PWRON1 button usable,
found e.g. on amazon kindle D01100/D01200 readers.
A ten-year-old IRQ issue needed a fix, mc13783-pwrbutton had to be
extended to the other to mc13xxx PMIC as well (keeping the mc13892
PWRON3 key unsupported for simplicity) and adding OF support.
The implementation has been tested on amazon kindle D01100 and D01200
readers using PWRON1 of a mc13892.

V2:
- Convert dt-bindings from txt to fsl,mc13xxx.yaml and add vendor prefix
  to led-control property, causing changes in dts and driver.
- Change node name from pwrbuttons to buttons
- Change property debounce-delay-value to debounce-delay-ms
- Fixed a section mismatch error
- Fixed https://lore.kernel.org/r/202508210551.VzAtE5re-lkp@intel.com/
  (wrong index used when converting to array access)
- Usage of generic device properties API in mc13783-pwrbutton.c
- Provide chip-specific max button id via platform_device_id, therefore
  swap patches 3 and 4.

Thanks in advance for the review effords,
Cheers, Alexnder

Alexander Kurz (9):
  Input: mc13783-pwrbutton: fix irq mixup
  Input: mc13783-pwrbutton: use managed resources
  Input: mc13783-pwrbutton: convert pdata members to array
  Input: mc13783-pwrbutton: enable other mc13xxx PMIC
  dt-bindings: mfd: fsl,mc13xxx: convert txt to DT schema
  dt-bindings: mfd: fsl,mc13xxx: add buttons node
  ARM: dts: imx: Use fsl,led-control as mc13xxx node name
  leds: mc13783: use fsl,led-control as node name
  Input: mc13783-pwrbutton: add OF support

 .../devicetree/bindings/mfd/fsl,mc13xxx.yaml  | 272 ++++++++++++++++++
 .../devicetree/bindings/mfd/mc13xxx.txt       | 156 ----------
 .../dts/nxp/imx/imx27-phytec-phycore-som.dtsi |   2 +-
 arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts  |   2 +-
 .../boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts  |   2 +-
 .../boot/dts/nxp/imx/imx51-zii-scu3-esb.dts   |   2 +-
 drivers/input/misc/Kconfig                    |   4 +-
 drivers/input/misc/mc13783-pwrbutton.c        | 235 +++++++++++----
 drivers/leds/leds-mc13783.c                   |   2 +-
 include/linux/mfd/mc13783.h                   |   4 +-
 include/linux/mfd/mc13xxx.h                   |  10 +-
 11 files changed, 461 insertions(+), 230 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/mc13xxx.txt

-- 
2.39.5