.../iio/temperature/microchip,mcp9600.yaml | 57 +++++++- drivers/iio/temperature/Kconfig | 8 +- drivers/iio/temperature/mcp9600.c | 151 +++++++++++++++++---- 3 files changed, 187 insertions(+), 29 deletions(-)
ChangeLog:
v7 -> v8:
- Style changes in dt-bindings example
- Simplify some return value checks
- Move assignment to where it's checked
- Speeling
v6 -> v7:
- Separate out the mcp9600 IIR series into its own series as there is
a lot of conversation around implementation (removed related
comments from this changelog).
v5 -> v6:
- Fix accidental typo added in dt-bindings: IRQ_TYPE_EDGE_RISIN
- Correct some constraints in dt-bindings
- Reverse if/then for mcp9601 vs mcp9600 constraints in dt-bindings
- Updates to changelog for patch 2/6 (dt-bindings mcp9600)
- Cleanup tabs that were converted to spaces
- Split thermocouple-type default to separate patch
v4 -> v5:
- None
v3 -> v4:
- Based on feedback from David Lechner <dlechner@baylibre.com>
* Allow fallback compatible in dt-bindings for mcp9601.
- Based on feedback from Jonathan Cameron <jic23@kernel.org>
* Be explicit in patch description for fixed width changes.
* Check chip_info for NULL to quiet warnings from kernel-test-robot
* Remove "and similar" for long description of MCP9600.
- Set default 3 for thermocouple in dt-binding
- Rework open/short circuit in dt-bindings
v2 -> v3:
- Improve changelogs in each patch
- Based on feedback from Andy Shevchenko <andy.shevchenko@gmail.com>
* Set register offsets to fixed width
* Fix typos
* Future-proof Kconfig changes
* Convert to using chip_info paradigm
* Verbiage: dt -> firmware description
* Use proper specifiers and drop castings
* Fix register offset to be fixed-width
* u8 for cfg var
* Fix % type for u32 to be %u
* Make blank lines consistent between case statements
v1 -> v2:
- Break into individual patches
v1:
- Initial patch to enable IIR and thermocouple-type
- Recognize mcp9601
Signed-off-by: Ben Collins <bcollins@watter.com>
---
- Link to v7: https://lore.kernel.org/r/20250819-upstream-changes-v7-0-88a33aa78f6a@watter.com
---
Ben Collins (5):
dt-bindings: iio: mcp9600: Set default 3 for thermocouple-type
dt-bindings: iio: mcp9600: Add microchip,mcp9601 and add constraints
iio: mcp9600: White space and fixed width cleanup
iio: mcp9600: Recognize chip id for mcp9601
iio: mcp9600: Add support for thermocouple-type
.../iio/temperature/microchip,mcp9600.yaml | 57 +++++++-
drivers/iio/temperature/Kconfig | 8 +-
drivers/iio/temperature/mcp9600.c | 151 +++++++++++++++++----
3 files changed, 187 insertions(+), 29 deletions(-)
---
base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9
change-id: 20250819-upstream-changes-c89af86743fa
Best regards,
--
Ben Collins <bcollins@watter.com>
On Fri, 22 Aug 2025 09:23:49 -0400 Ben Collins <bcollins@watter.com> wrote: Series applied with that unnecessary include that David pointed out dropped. Applied to the togreg branch of iio.git but initially pushed out as testing to give 0-day a few days to poke at it. Thanks, Jonathan > ChangeLog: > v7 -> v8: > - Style changes in dt-bindings example > - Simplify some return value checks > - Move assignment to where it's checked > - Speeling > > v6 -> v7: > - Separate out the mcp9600 IIR series into its own series as there is > a lot of conversation around implementation (removed related > comments from this changelog). > > v5 -> v6: > - Fix accidental typo added in dt-bindings: IRQ_TYPE_EDGE_RISIN > - Correct some constraints in dt-bindings > - Reverse if/then for mcp9601 vs mcp9600 constraints in dt-bindings > - Updates to changelog for patch 2/6 (dt-bindings mcp9600) > - Cleanup tabs that were converted to spaces > - Split thermocouple-type default to separate patch > > v4 -> v5: > - None > > v3 -> v4: > - Based on feedback from David Lechner <dlechner@baylibre.com> > * Allow fallback compatible in dt-bindings for mcp9601. > - Based on feedback from Jonathan Cameron <jic23@kernel.org> > * Be explicit in patch description for fixed width changes. > * Check chip_info for NULL to quiet warnings from kernel-test-robot > * Remove "and similar" for long description of MCP9600. > - Set default 3 for thermocouple in dt-binding > - Rework open/short circuit in dt-bindings > > v2 -> v3: > - Improve changelogs in each patch > - Based on feedback from Andy Shevchenko <andy.shevchenko@gmail.com> > * Set register offsets to fixed width > * Fix typos > * Future-proof Kconfig changes > * Convert to using chip_info paradigm > * Verbiage: dt -> firmware description > * Use proper specifiers and drop castings > * Fix register offset to be fixed-width > * u8 for cfg var > * Fix % type for u32 to be %u > * Make blank lines consistent between case statements > > v1 -> v2: > - Break into individual patches > > v1: > - Initial patch to enable IIR and thermocouple-type > - Recognize mcp9601 > > Signed-off-by: Ben Collins <bcollins@watter.com> > --- > - Link to v7: https://lore.kernel.org/r/20250819-upstream-changes-v7-0-88a33aa78f6a@watter.com > > --- > Ben Collins (5): > dt-bindings: iio: mcp9600: Set default 3 for thermocouple-type > dt-bindings: iio: mcp9600: Add microchip,mcp9601 and add constraints > iio: mcp9600: White space and fixed width cleanup > iio: mcp9600: Recognize chip id for mcp9601 > iio: mcp9600: Add support for thermocouple-type > > .../iio/temperature/microchip,mcp9600.yaml | 57 +++++++- > drivers/iio/temperature/Kconfig | 8 +- > drivers/iio/temperature/mcp9600.c | 151 +++++++++++++++++---- > 3 files changed, 187 insertions(+), 29 deletions(-) > --- > base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9 > change-id: 20250819-upstream-changes-c89af86743fa > > Best regards,
On Mon, Aug 25, 2025 at 10:38:47AM -0500, Jonathan Cameron wrote: > On Fri, 22 Aug 2025 09:23:49 -0400 > Ben Collins <bcollins@watter.com> wrote: > > Series applied with that unnecessary include that David pointed out dropped. > > Applied to the togreg branch of iio.git but initially pushed out as testing > to give 0-day a few days to poke at it. > Thanks Jonathan and to everyone else for the input. > > > ChangeLog: > > v7 -> v8: > > - Style changes in dt-bindings example > > - Simplify some return value checks > > - Move assignment to where it's checked > > - Speeling > > > > v6 -> v7: > > - Separate out the mcp9600 IIR series into its own series as there is > > a lot of conversation around implementation (removed related > > comments from this changelog). > > > > v5 -> v6: > > - Fix accidental typo added in dt-bindings: IRQ_TYPE_EDGE_RISIN > > - Correct some constraints in dt-bindings > > - Reverse if/then for mcp9601 vs mcp9600 constraints in dt-bindings > > - Updates to changelog for patch 2/6 (dt-bindings mcp9600) > > - Cleanup tabs that were converted to spaces > > - Split thermocouple-type default to separate patch > > > > v4 -> v5: > > - None > > > > v3 -> v4: > > - Based on feedback from David Lechner <dlechner@baylibre.com> > > * Allow fallback compatible in dt-bindings for mcp9601. > > - Based on feedback from Jonathan Cameron <jic23@kernel.org> > > * Be explicit in patch description for fixed width changes. > > * Check chip_info for NULL to quiet warnings from kernel-test-robot > > * Remove "and similar" for long description of MCP9600. > > - Set default 3 for thermocouple in dt-binding > > - Rework open/short circuit in dt-bindings > > > > v2 -> v3: > > - Improve changelogs in each patch > > - Based on feedback from Andy Shevchenko <andy.shevchenko@gmail.com> > > * Set register offsets to fixed width > > * Fix typos > > * Future-proof Kconfig changes > > * Convert to using chip_info paradigm > > * Verbiage: dt -> firmware description > > * Use proper specifiers and drop castings > > * Fix register offset to be fixed-width > > * u8 for cfg var > > * Fix % type for u32 to be %u > > * Make blank lines consistent between case statements > > > > v1 -> v2: > > - Break into individual patches > > > > v1: > > - Initial patch to enable IIR and thermocouple-type > > - Recognize mcp9601 > > > > Signed-off-by: Ben Collins <bcollins@watter.com> > > --- > > - Link to v7: https://lore.kernel.org/r/20250819-upstream-changes-v7-0-88a33aa78f6a@watter.com > > > > --- > > Ben Collins (5): > > dt-bindings: iio: mcp9600: Set default 3 for thermocouple-type > > dt-bindings: iio: mcp9600: Add microchip,mcp9601 and add constraints > > iio: mcp9600: White space and fixed width cleanup > > iio: mcp9600: Recognize chip id for mcp9601 > > iio: mcp9600: Add support for thermocouple-type > > > > .../iio/temperature/microchip,mcp9600.yaml | 57 +++++++- > > drivers/iio/temperature/Kconfig | 8 +- > > drivers/iio/temperature/mcp9600.c | 151 +++++++++++++++++---- > > 3 files changed, 187 insertions(+), 29 deletions(-) > > --- > > base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9 > > change-id: 20250819-upstream-changes-c89af86743fa > > > > Best regards, > > -- Ben Collins https://libjwt.io https://github.com/benmcollins -- 3EC9 7598 1672 961A 1139 173A 5D5A 57C7 242B 22CF
© 2016 - 2026 Red Hat, Inc.