From: "hongyu.chen1" <hongyu.chen1@amlogic.com>

Add power domain controller node for Amlogic S6 SoC.

Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
index 5f602f1170c0..0dca64a2ef9e 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+#include <dt-bindings/power/amlogic,s6-pwrc.h>
 / {
 	cpus {
 		#address-cells = <2>;
@@ -41,6 +42,15 @@ cpu3: cpu@300 {
 		};
 	};
 
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,s6-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

-- 
2.37.1