Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  sc8180x.dtsi:1743.4-1746.30: Warning (interrupt_map): /soc@0/pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 836ac94551478fd728b1229616bbc6494cee336f..15a75def6204a35d5852e73d66fd3052e38e7863 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3721,6 +3721,7 @@ remoteproc_adsp_glink: glink-edge {
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */

-- 
2.48.1