Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8qm-ss-hsio.dtsi:83.3-86.28: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 827e1365b5dae438d4628852ed6884aa846eb89b..5206ca82eaf642a32299147e9c1b45704075e2b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -245,6 +245,7 @@ gic: interrupt-controller@51a00000 {
<0x0 0x52000000 0 0x2000>, /* GICC */
<0x0 0x52010000 0 0x1000>, /* GICH */
<0x0 0x52020000 0 0x20000>; /* GICV */
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
--
2.48.1