Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8mp.dtsi:2184.4-2187.29: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index bb24dba7338ea00dd50c5f7e409d72ecb7d790b9..b57817949d80ae7d891b2168c17d4e1a6311fbbf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -2317,6 +2317,7 @@ gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
<0x38880000 0xc0000>;
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
--
2.48.1