aqr107_read_rate() - called from aqr107_read_status() even periodically
if there is no PHY IRQ - currently reads GLOBAL_CFG registers to
determine what kind of rate adaptation is in use for the current
phydev->speed. However, GLOBAL_CFG registers are runtime invariants, so
accessing the slow MDIO bus is unnecessary.

Reimplement aqr107_read_rate() by reading from the
priv->global_cfg[i].rade_adapt variables (where i is the entry
corresponding to the current phydev->speed).

Making this change also helps disentangle the code delta between
aqr105_read_rate() and aqr107_read_rate(). They are now identical up to
the code snippet which iterates over priv->global_cfg[]. This will help
eliminate the duplicate code in the upcoming patch.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/phy/aquantia/aquantia_main.c | 29 +++++++++++-------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 0f20ed6f96d8..4795987ef61b 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -568,8 +568,8 @@ static int aqr105_read_status(struct phy_device *phydev)
 
 static int aqr107_read_rate(struct phy_device *phydev)
 {
-	u32 config_reg;
-	int val;
+	struct aqr107_priv *priv = phydev->priv;
+	int i, val;
 
 	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
 	if (val < 0)
@@ -583,42 +583,39 @@ static int aqr107_read_rate(struct phy_device *phydev)
 	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
 	case MDIO_AN_TX_VEND_STATUS1_10BASET:
 		phydev->speed = SPEED_10;
-		config_reg = VEND1_GLOBAL_CFG_10M;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
 		phydev->speed = SPEED_100;
-		config_reg = VEND1_GLOBAL_CFG_100M;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
 		phydev->speed = SPEED_1000;
-		config_reg = VEND1_GLOBAL_CFG_1G;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
 		phydev->speed = SPEED_2500;
-		config_reg = VEND1_GLOBAL_CFG_2_5G;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
 		phydev->speed = SPEED_5000;
-		config_reg = VEND1_GLOBAL_CFG_5G;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
 		phydev->speed = SPEED_10000;
-		config_reg = VEND1_GLOBAL_CFG_10G;
 		break;
 	default:
 		phydev->speed = SPEED_UNKNOWN;
 		return 0;
 	}
 
-	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, config_reg);
-	if (val < 0)
-		return val;
+	for (i = 0; i < AQR_NUM_GLOBAL_CFG; i++) {
+		struct aqr_global_syscfg *syscfg = &priv->global_cfg[i];
 
-	if (FIELD_GET(VEND1_GLOBAL_CFG_RATE_ADAPT, val) ==
-	    VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE)
-		phydev->rate_matching = RATE_MATCH_PAUSE;
-	else
-		phydev->rate_matching = RATE_MATCH_NONE;
+		if (syscfg->speed != phydev->speed)
+			continue;
+
+		if (syscfg->rate_adapt == AQR_RATE_ADAPT_PAUSE)
+			phydev->rate_matching = RATE_MATCH_PAUSE;
+		else
+			phydev->rate_matching = RATE_MATCH_NONE;
+		break;
+	}
 
 	return 0;
 }
-- 
2.34.1