I'm not sure whether there is any similar real-life problem on AQR813
and AQR114C as were seen on the PHYs that these commit were written for:
- a7f3abcf6357 ("net: phy: aquantia: only poll GLOBAL_CFG regs on
aqr113, aqr113c and aqr115c")
- bed90b06b681 ("net: phy: aquantia: clear PMD Global Transmit Disable
bit during init")
but the inconsistency in handling between PHYs of the same generation is
striking. Apart from different firmware builds with different
provisioning, the only difference between these PHYs should be the max
link speed and/or the number of ports.
Let's try and see if there's any problem if all PHYs from the same
generation use the same config_init() method.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Robert Marko <robimarko@gmail.com>
Cc: Paweł Owoc <frut3k7@gmail.com>
Cc: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/phy/aquantia/aquantia_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index eb4409fdad34..dd83205a8869 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -1324,7 +1324,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR114C",
.probe = aqr107_probe,
.get_rate_matching = aqr_gen2_get_rate_matching,
- .config_init = aqr_gen2_config_init,
+ .config_init = aqr_gen4_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -1374,7 +1374,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR813",
.probe = aqr107_probe,
.get_rate_matching = aqr_gen2_get_rate_matching,
- .config_init = aqr_gen2_config_init,
+ .config_init = aqr_gen4_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
--
2.34.1