drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates a critical
race condition:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed.
3.Subsequently, the brcmf_btcoex_info structure is freed.
4.Finally, the rescheduled worker attempts to execute, leading to
use-after-free bugs by accessing the freed brcmf_btcoex_info object.
The following diagram illustrates this sequence of events:
cpu0 cpu1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work() //reschedule
kfree(cfg->btcoex);//free |
| brcmf_btcoex_handler() //worker
| btci-> //use
To resolve this race condition, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false.
Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c
index 69ef8cf203d2..67c0c5a92f99 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c
@@ -393,10 +393,8 @@ void brcmf_btcoex_detach(struct brcmf_cfg80211_info *cfg)
if (!cfg->btcoex)
return;
- if (cfg->btcoex->timer_on) {
- cfg->btcoex->timer_on = false;
- timer_shutdown_sync(&cfg->btcoex->timer);
- }
+ timer_shutdown_sync(&cfg->btcoex->timer);
+ cfg->btcoex->timer_on = false;
cancel_work_sync(&cfg->btcoex->work);
--
2.34.1On 8/21/2025 6:32 AM, Duoming Zhou wrote:
> The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
> flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
> runs as timer handler, sets timer_on to false. This creates a critical
> race condition:
>
> 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
> is executing, it may observe timer_on as false and skip the call to
> timer_shutdown_sync().
>
> 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
> worker after the cancel_work_sync() has been executed.
>
> 3.Subsequently, the brcmf_btcoex_info structure is freed.
>
> 4.Finally, the rescheduled worker attempts to execute, leading to
> use-after-free bugs by accessing the freed brcmf_btcoex_info object.
Thanks for the patch. Being a nit picker just wanted to day that the
use-after-free happens a bit earlier as the worker itself is contained
in struct brcmf_btcoex_info. Also the diagram below does not add much
more than the textual description above.
> The following diagram illustrates this sequence of events:
>
> cpu0 cpu1
> brcmf_btcoex_detach | brcmf_btcoex_timerfunc
> | bt_local->timer_on = false;
> if (cfg->btcoex->timer_on) |
> ... |
> cancel_work_sync(); |
> ... | schedule_work() //reschedule
> kfree(cfg->btcoex);//free |
> | brcmf_btcoex_handler() //worker
> | btci-> //use
>
> To resolve this race condition, drop the conditional check and call
> timer_shutdown_sync() directly. It can deactivate the timer reliably,
> regardless of its current state. Once stopped, the timer_on state is
> then set to false.
However, no reason to stop this patch from going in so...
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP")
> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
> ---
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
On Thu, 21 Aug 2025 20:44:21 +0200 Arend van Spriel wrote:
> > The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
> > flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
> > runs as timer handler, sets timer_on to false. This creates a critical
> > race condition:
> >
> > 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
> > is executing, it may observe timer_on as false and skip the call to
> > timer_shutdown_sync().
> >
> > 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
> > worker after the cancel_work_sync() has been executed.
> >
> > 3.Subsequently, the brcmf_btcoex_info structure is freed.
> >
> > 4.Finally, the rescheduled worker attempts to execute, leading to
> > use-after-free bugs by accessing the freed brcmf_btcoex_info object.
>
> Thanks for the patch. Being a nit picker just wanted to day that the
> use-after-free happens a bit earlier as the worker itself is contained
> in struct brcmf_btcoex_info. Also the diagram below does not add much
> more than the textual description above.
Thank you very much for your guidance.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() worker — such as the container_of macro
and subsequent dereferences of the brcmf_btcoex_info object will
cause a use-after-free access. The following timeline illustrates
this scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(&bt_local->work); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci->vif; // USE
during the worker's execution|
*/ |
I would like to submit a v2 patch to make the description clearer.
> > The following diagram illustrates this sequence of events:
> >
> > cpu0 cpu1
> > brcmf_btcoex_detach | brcmf_btcoex_timerfunc
> > | bt_local->timer_on = false;
> > if (cfg->btcoex->timer_on) |
> > ... |
> > cancel_work_sync(); |
> > ... | schedule_work() //reschedule
> > kfree(cfg->btcoex);//free |
> > | brcmf_btcoex_handler() //worker
> > | btci-> //use
> >
> > To resolve this race condition, drop the conditional check and call
> > timer_shutdown_sync() directly. It can deactivate the timer reliably,
> > regardless of its current state. Once stopped, the timer_on state is
> > then set to false.
>
> However, no reason to stop this patch from going in so...
>
> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
>
> > Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP")
> > Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
> > ---
> > drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c | 6 ++----
> > 1 file changed, 2 insertions(+), 4 deletions(-)
Best regards,
Duoming Zhou
© 2016 - 2026 Red Hat, Inc.