During the device remove process, the device is reset, causing the
configuration registers to go back to their default state, which is
zero. As the driver is checking if the event log support was enabled
before deallocating, it will fail if a reset happened before.

Do not check if the support was enabled, the check for 'idxd->evl'
being valid (only allocated if the HW capability is available) is
enough.

Fixes: 244da66cda35 ("dmaengine: idxd: setup event log configuration")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
---
 drivers/dma/idxd/device.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index ddce262853b0..0cf1425e9a7c 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -818,10 +818,6 @@ static void idxd_device_evl_free(struct idxd_device *idxd)
 	if (!evl)
 		return;
 
-	gencfg.bits = ioread32(idxd->reg_base + IDXD_GENCFG_OFFSET);
-	if (!gencfg.evl_en)
-		return;
-
 	mutex_lock(&evl->lock);
 	gencfg.evl_en = 0;
 	iowrite32(gencfg.bits, idxd->reg_base + IDXD_GENCFG_OFFSET);

-- 
2.50.1