The &eusb3_repeater belongs to the first port of the USB MP controller and
the &eusb6_repeater belongs to the second. This is obvious if one looks at
e.g. the CRD or the Dell XPS where only the second port of the USB MP is
used: They only have the &eusb6_repeater and already specify it for the
&usb_mp_hsphy1.

Swap them to set the correct repeater for each of the USB ports.

Fixes: d12fbd11c5a3 ("arm64: dts: qcom: x1e001de-devkit: Enable support for both Type-A USB ports")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 2d9627e6c7983daedba87619ba01074ee22b43c9..a3323d03f644e411c472305f5cf3482ecbdb787c 100644
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -1474,7 +1474,7 @@ &usb_mp_hsphy0 {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb6_repeater>;
+	phys = <&eusb3_repeater>;
 
 	status = "okay";
 };
@@ -1483,7 +1483,7 @@ &usb_mp_hsphy1 {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb3_repeater>;
+	phys = <&eusb6_repeater>;
 
 	status = "okay";
 };

-- 
2.50.1