On STM32MP25 SoC, the syscfg peripheral provides a clock to the display
subsystem through a multiplexer.  Since it only provides a single clock,
the cell value is 0.

Doing so allows the clock consumers to reach the peripheral and gate the
clock accordingly.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 .../bindings/arm/stm32/st,stm32-syscon.yaml        | 31 +++++++++++++++-------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index ed97652c84922813e94b1818c07fe8714891c089..95d2319afe235fa86974d80f89c9deeae2275232 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -36,20 +36,31 @@ properties:
   clocks:
     maxItems: 1
 
+  "#clock-cells":
+    const: 0
+
 required:
   - compatible
   - reg
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - st,stm32mp157-syscfg
-          - st,stm32f4-gcan
-then:
-  required:
-    - clocks
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp157-syscfg
+              - st,stm32f4-gcan
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          const: st,stm32mp25-syscfg
+    then:
+      required:
+        - "#clock-cells"
 
 additionalProperties: false
 

-- 
2.25.1

On Tue, 19 Aug 2025 11:15:59 +0200, Raphael Gallais-Pou wrote:
> On STM32MP25 SoC, the syscfg peripheral provides a clock to the display
> subsystem through a multiplexer.  Since it only provides a single clock,
> the cell value is 0.
> 
> Doing so allows the clock consumers to reach the peripheral and gate the
> clock accordingly.
> 
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  .../bindings/arm/stm32/st,stm32-syscon.yaml        | 31 +++++++++++++++-------
>  1 file changed, 21 insertions(+), 10 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-6-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.