The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#

Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
 arch/mips/boot/dts/lantiq/danube_easy50712.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
index 1ce20b7d05cb..d8b3cd69eda3 100644
--- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
@@ -87,8 +87,11 @@ etop@e180000 {
 			reg = <0xe180000 0x40000>;
 			interrupt-parent = <&icu0>;
 			interrupts = <73 78>;
+			interrupt-names = "tx", "rx";
 			phy-mode = "rmii";
 			mac-address = [ 00 11 22 33 44 55 ];
+			lantiq,rx-burst-length = <4>;
+			lantiq,tx-burst-length = <4>;
 		};
 
 		stp0: stp@e100bb0 {
-- 
2.47.2