Add new device tree and binding for the Samsung Galaxy S20 FE
 4G/5G phone (SM-G980/SM-G981B)
It features 6GB/8GB of RAM, 128GB/256GB UFS and also has 4G/5G variants.
 For now, this device tree covers those variants as they have the same
 codename and RAM is assigned from the bootloader.

Best regards,
Eric

Eric Gonçalves (2):
  dt-bindings: arm: qcom: document r8q board binding
  arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE

 .../devicetree/bindings/arm/qcom.yaml         |  1 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../boot/dts/qcom/sm8250-samsung-r8q.dts      | 47 +++++++++++++++++++
 3 files changed, 49 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts

-- 
2.50.1

On Fri, 15 Aug 2025 15:14:24 +0000, Eric Gonçalves wrote:
> Add new device tree and binding for the Samsung Galaxy S20 FE
>  4G/5G phone (SM-G980/SM-G981B)
> It features 6GB/8GB of RAM, 128GB/256GB UFS and also has 4G/5G variants.
>  For now, this device tree covers those variants as they have the same
>  codename and RAM is assigned from the bootloader.
> 
> Best regards,
> Eric
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: qcom: document r8q board binding
      commit: 5fa902fb5716f419915fdb11c6b7e62f5ba7d14f
[2/2] arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
      commit: 6657fe9e9f23b1c61d0bcc14a3af732f92fdc19b

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>