On Fri, Aug 15, 2025 at 05:03:59PM +0800, Peng Fan wrote:
> From: Luke Wang <ziniu.wang_1@nxp.com>
>
> The drive strength is too high for SDR104 mode. Change the drive
> strength to X3 as hardware team recommends.
>
> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
> index de7f4321e5f9d7d6a6c46741d3710756dd2b69cf..3c23022923e68fe0f5205d322ad6f8834a46dc56 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
> @@ -881,12 +881,12 @@ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>
> pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> fsl,pins = <
> - IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe
> - IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe
> - IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
> - IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
> - IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
> - IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
> + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
> + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
> + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
> + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
> + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
> + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
> IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> >;
> };
>
> --
> 2.37.1
>