On Fri, Aug 15, 2025 at 05:03:57PM +0800, Peng Fan wrote:
> System Manager supports reading out pf09 and pf53 temperature and
> SCMI Agent could get the values through SCMI sensor protocol. So add
> the nodes to allow Linux to get the temperature.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 73 +++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index c35a5083c837379804e07f98163c0a5d4301abd7..0ad5707314fb225b74d8940908b53dc2a444ed5d 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -1078,6 +1078,79 @@ map3 {
> };
> };
> };
> +
> + pf09-thermal {
> + polling-delay = <2000>;
> + polling-delay-passive = <250>;
> + thermal-sensors = <&scmi_sensor 2>;
> +
> + trips {
> + pf09_alert: trip0 {
> + hysteresis = <2000>;
> + temperature = <140000>;
> + type = "passive";
> + };
> +
> + pf09_crit: trip1 {
> + hysteresis = <2000>;
> + temperature = <155000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + pf53arm-thermal {
> + polling-delay = <2000>;
> + polling-delay-passive = <250>;
> + thermal-sensors = <&scmi_sensor 4>;
> +
> + cooling-maps {
> + map0 {
> + trip = <&pf5301_alert>;
> + cooling-device =
> + <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> + trips {
> + pf5301_alert: trip0 {
> + hysteresis = <2000>;
> + temperature = <140000>;
> + type = "passive";
> + };
> +
> + pf5301_crit: trip1 {
> + hysteresis = <2000>;
> + temperature = <155000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + pf53soc-thermal {
> + polling-delay = <2000>;
> + polling-delay-passive = <250>;
> + thermal-sensors = <&scmi_sensor 3>;
> +
> + trips {
> + pf5302_alert: trip0 {
> + hysteresis = <2000>;
> + temperature = <140000>;
> + type = "passive";
> + };
> +
> + pf5302_crit: trip1 {
> + hysteresis = <2000>;
> + temperature = <155000>;
> + type = "critical";
> + };
> + };
> + };
> };
>
> &tpm6 {
>
> --
> 2.37.1
>