1. Patchew
  2. linux
  3. [PATCH 0/5] Add MIPI CSI-2 support for i.MX8ULP
  4. View patch

[PATCH 2/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes

guoniu.zhou@oss.nxp.com posted 5 patches 1 month, 3 weeks ago
There is a newer version of this series
[PATCH 2/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes
Posted by guoniu.zhou@oss.nxp.com 1 month, 3 weeks ago 
From: Guoniu Zhou <guoniu.zhou@nxp.com>

The CSI-2 in the i.MX8ULP is almost identical to the version present
in the i.MX8QXP/QM and is routed to the ISI. Add both the ISI and CSI
nodes and mark them as disabled by default since capture is dependent
on an attached camera.

Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 2562a35286c2..71abc2a3d505 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/imx8ulp-power.h>
+#include <dt-bindings/reset/imx8ulp-pcc-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "imx8ulp-pinfunc.h"
@@ -840,6 +841,72 @@ spdif: spdif@2dab0000 {
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
+
+			isi: isi@2dac0000 {
+				compatible = "fsl,imx8ulp-isi";
+				reg = <0x2dac0000 0x10000>;
+				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_ISI>,
+					 <&cgc2 IMX8ULP_CLK_LPAV_AXI_DIV>;
+				clock-names = "axi", "apb";
+				power-domains = <&scmi_devpd IMX8ULP_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						isi_in: endpoint {
+							remote-endpoint = <&mipi_csi_out>;
+						};
+					};
+				};
+			};
+
+			mipi_csi: csi@2daf0000 {
+				compatible = "fsl,imx8ulp-mipi-csi2";
+				reg = <0x2daf0000 0x10000>,
+				      <0x2dad0000 0x10000>;
+				clocks = <&pcc5 IMX8ULP_CLK_CSI>,
+					 <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
+					 <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
+					 <&pcc5 IMX8ULP_CLK_CSI_REGS>;
+				clock-names = "core", "esc", "ui", "pclk";
+				assigned-clocks = <&pcc5 IMX8ULP_CLK_CSI>,
+						  <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
+						  <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
+						  <&pcc5 IMX8ULP_CLK_CSI_REGS>;
+				assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV1>,
+							 <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV2>,
+							 <&cgc2 IMX8ULP_CLK_PLL4_PFD0_DIV1>;
+				assigned-clock-rates = <200000000>,
+						       <80000000>,
+						       <100000000>,
+						       <79200000>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_MIPI_CSI>;
+				resets = <&pcc5 PCC5_CSI_SWRST>,
+					 <&pcc5 PCC5_CSI_REGS_SWRST>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_out: endpoint {
+							remote-endpoint = <&isi_in>;
+						};
+					};
+				};
+			};
 		};
 
 		gpiod: gpio@2e200000 {
-- 
2.34.1
Re: [PATCH 2/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes
Posted by Frank Li 1 month, 3 weeks ago 
On Tue, Aug 12, 2025 at 04:19:23PM +0800, guoniu.zhou@oss.nxp.com wrote:
> From: Guoniu Zhou <guoniu.zhou@nxp.com>
>
> The CSI-2 in the i.MX8ULP is almost identical to the version present
> in the i.MX8QXP/QM and is routed to the ISI. Add both the ISI and CSI
> nodes and mark them as disabled by default since capture is dependent
> on an attached camera.
>
> Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
> ---

suppose dts is last patch because binding and driver will be pickup by
media maintainer first, then shawn pick up dts part.

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 67 ++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index 2562a35286c2..71abc2a3d505 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/imx8ulp-power.h>
> +#include <dt-bindings/reset/imx8ulp-pcc-reset.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  #include "imx8ulp-pinfunc.h"
> @@ -840,6 +841,72 @@ spdif: spdif@2dab0000 {
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> +
> +			isi: isi@2dac0000 {
> +				compatible = "fsl,imx8ulp-isi";
> +				reg = <0x2dac0000 0x10000>;
> +				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&pcc5 IMX8ULP_CLK_ISI>,
> +					 <&cgc2 IMX8ULP_CLK_LPAV_AXI_DIV>;
> +				clock-names = "axi", "apb";
> +				power-domains = <&scmi_devpd IMX8ULP_PD_ISI>;
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						isi_in: endpoint {
> +							remote-endpoint = <&mipi_csi_out>;
> +						};
> +					};
> +				};
> +			};
> +
> +			mipi_csi: csi@2daf0000 {
> +				compatible = "fsl,imx8ulp-mipi-csi2";
> +				reg = <0x2daf0000 0x10000>,
> +				      <0x2dad0000 0x10000>;
> +				clocks = <&pcc5 IMX8ULP_CLK_CSI>,
> +					 <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
> +					 <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
> +					 <&pcc5 IMX8ULP_CLK_CSI_REGS>;
> +				clock-names = "core", "esc", "ui", "pclk";
> +				assigned-clocks = <&pcc5 IMX8ULP_CLK_CSI>,
> +						  <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
> +						  <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
> +						  <&pcc5 IMX8ULP_CLK_CSI_REGS>;
> +				assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV1>,
> +							 <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV2>,
> +							 <&cgc2 IMX8ULP_CLK_PLL4_PFD0_DIV1>;
> +				assigned-clock-rates = <200000000>,
> +						       <80000000>,
> +						       <100000000>,
> +						       <79200000>;
> +				power-domains = <&scmi_devpd IMX8ULP_PD_MIPI_CSI>;
> +				resets = <&pcc5 PCC5_CSI_SWRST>,
> +					 <&pcc5 PCC5_CSI_REGS_SWRST>;
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +
> +						mipi_csi_out: endpoint {
> +							remote-endpoint = <&isi_in>;
> +						};
> +					};
> +				};
> +			};
>  		};
>
>  		gpiod: gpio@2e200000 {
> --
> 2.34.1
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.