Add PCIe dtsi node for PCIe0 controller on sc7280 platform.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 170 ++++++++++++++++++++++++++++++++++-
1 file changed, 169 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 64a2abd3010018e94eb50c534a509d6b4cf2473b..b0f688ce1c285888c05ed718e58dfafd51e2c1cf 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -970,7 +970,7 @@ gcc: clock-controller@100000 {
reg = <0 0x00100000 0 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
- <0>, <&pcie1_phy>,
+ <&pcie0_phy>, <&pcie1_phy>,
<&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
@@ -2200,6 +2200,149 @@ wifi: wifi@17a10040 {
qcom,smem-state-names = "wlan-smp2p-out";
};
+ pcie0: pci@1c00000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-sc7280";
+ reg = <0x0 0x01c00000 0x0 0x3000>,
+ <0x0 0x60000000 0x0 0xf1d>,
+ <0x0 0x60000f20 0x0 0xa8>,
+ <0x0 0x60001000 0x0 0x1000>,
+ <0x0 0x60100000 0x0 0x100000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+ bus-range = <0x00 0xff>;
+
+ dma-coherent;
+
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+ <&pcie0_phy>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu",
+ "aggre0",
+ "aggre1";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&aggre1_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc2 SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
+
+ status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sc7280-qmp-gen3x1-pcie-phy", "qcom,sm8250-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x1000>;
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_EN>,
+ <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+ };
+
pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sc7280";
reg = <0 0x01c08000 0 0x3000>,
@@ -5285,6 +5428,31 @@ mi2s1_ws: mi2s1-ws-state {
function = "mi2s1_ws";
};
+ pcie0_reset_n: pcie0-reset-n-state {
+ pins = "gpio87";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-low;
+ bias-disable;
+ };
+
+ pcie0_wake_n: pcie0-wake-n-state {
+ pins = "gpio89";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcie0_clkreq_n: pcie0-clkreq-n-state {
+ pins = "gpio88";
+ function = "pcie0_clkreqn";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
pcie1_clkreq_n: pcie1-clkreq-n-state {
pins = "gpio79";
function = "pcie1_clkreqn";
--
2.34.1On 12/08/2025 15:56, Krishna Chaitanya Chundru wrote:
> Add PCIe dtsi node for PCIe0 controller on sc7280 platform.
>
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 170 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 169 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 64a2abd3010018e94eb50c534a509d6b4cf2473b..b0f688ce1c285888c05ed718e58dfafd51e2c1cf 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -970,7 +970,7 @@ gcc: clock-controller@100000 {
> reg = <0 0x00100000 0 0x1f0000>;
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
> - <0>, <&pcie1_phy>,
> + <&pcie0_phy>, <&pcie1_phy>,
> <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
> <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
> clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
> @@ -2200,6 +2200,149 @@ wifi: wifi@17a10040 {
> qcom,smem-state-names = "wlan-smp2p-out";
> };
>
> + pcie0: pci@1c00000 {
> + device_type = "pci";
> + compatible = "qcom,pcie-sc7280";
This was already sent and reviewed by Bjorn. Please don't duplicate the
work.
Or implement entire feedback given on that other patchset.
Best regards,
Krzysztof
© 2016 - 2025 Red Hat, Inc.