[v2] Add the s32g2 and s32g3 FTM PWM support

[PATCH v2 0/2] Add the s32g2 and s32g3 FTM PWM support

Daniel Lezcano posted 2 patches 1 month, 3 weeks ago

Diff against v1 v3
Download series mbox

There is a newer version of this series

.../bindings/pwm/fsl,vf610-ftm-pwm.yaml       | 11 ++++--
drivers/pwm/pwm-fsl-ftm.c                     | 35 +++++++++++++++++--
2 files changed, 41 insertions(+), 5 deletions(-)

Expand all Fold all

[PATCH v2 0/2] Add the s32g2 and s32g3 FTM PWM support

Posted by Daniel Lezcano 1 month, 3 weeks ago

The NXP Automotive platform s32g2 and s32g3 have on their board a
FlexTimer (FTM) dedicated for the PWM. The same IP is found on the
Freescale Vybrid Family and the i.MX8 SoCs. However, there is a small
difference with some registers not available on the s32g2/3 and 6
channels instead of 8.

These two patches provide the DT bindings for the s32g2/3 compatible
strings and the code to deal with the FTM difference.

Changelog:
	v2:
	 - Merged the two booleans for the regmap holes check
	 - Clarified why this is needed in the changelog
	v1:
	 - Initial post

Daniel Lezcano (1):
  dt: bindings: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3

Ghennadi Procopciuc (1):
  pwm: Add the S32G support in the Freescale FTM driver

 .../bindings/pwm/fsl,vf610-ftm-pwm.yaml       | 11 ++++--
 drivers/pwm/pwm-fsl-ftm.c                     | 35 +++++++++++++++++--
 2 files changed, 41 insertions(+), 5 deletions(-)

-- 
2.43.0