The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
/home/aleksander/workspace/linux/arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
/home/aleksander/workspace/linux/arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
/home/aleksander/workspace/linux/arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
/home/aleksander/workspace/linux/arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
arch/mips/boot/dts/lantiq/danube_easy50712.dts | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
index 1ce20b7d05cb..c4d7aa5753b0 100644
--- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
@@ -82,13 +82,16 @@ conf_out {
};
};
- etop@e180000 {
+ ethernet@e180000 {
compatible = "lantiq,etop-xway";
reg = <0xe180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
+ interrupt-names = "tx", "rx";
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,rx-burst-length = <4>;
+ lantiq,tx-burst-length = <4>;
};
stp0: stp@e100bb0 {
--
2.47.2