The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series. The change to use clamp_t() was
done manually.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 90348a2af3e9dac72924561b23b169a268abc3b0..d00e415b9a991cd515e01d78a48ac6fe3e830b04 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -533,21 +533,20 @@ static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw)
 	pll_28nm->phy->pll_on = false;
 }
 
-static long dsi_pll_28nm_clk_round_rate(struct clk_hw *hw,
-		unsigned long rate, unsigned long *parent_rate)
+static int dsi_pll_28nm_clk_determine_rate(struct clk_hw *hw,
+					   struct clk_rate_request *req)
 {
 	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
 
-	if      (rate < pll_28nm->phy->cfg->min_pll_rate)
-		return  pll_28nm->phy->cfg->min_pll_rate;
-	else if (rate > pll_28nm->phy->cfg->max_pll_rate)
-		return  pll_28nm->phy->cfg->max_pll_rate;
-	else
-		return rate;
+	req->rate = clamp_t(unsigned long, req->rate,
+			    pll_28nm->phy->cfg->min_pll_rate,
+			    pll_28nm->phy->cfg->max_pll_rate);
+
+	return 0;
 }
 
 static const struct clk_ops clk_ops_dsi_pll_28nm_vco_hpm = {
-	.round_rate = dsi_pll_28nm_clk_round_rate,
+	.determine_rate = dsi_pll_28nm_clk_determine_rate,
 	.set_rate = dsi_pll_28nm_clk_set_rate,
 	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
 	.prepare = dsi_pll_28nm_vco_prepare_hpm,
@@ -556,7 +555,7 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco_hpm = {
 };
 
 static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = {
-	.round_rate = dsi_pll_28nm_clk_round_rate,
+	.determine_rate = dsi_pll_28nm_clk_determine_rate,
 	.set_rate = dsi_pll_28nm_clk_set_rate,
 	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
 	.prepare = dsi_pll_28nm_vco_prepare_lp,
@@ -565,7 +564,7 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = {
 };
 
 static const struct clk_ops clk_ops_dsi_pll_28nm_vco_8226 = {
-	.round_rate = dsi_pll_28nm_clk_round_rate,
+	.determine_rate = dsi_pll_28nm_clk_determine_rate,
 	.set_rate = dsi_pll_28nm_clk_set_rate,
 	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
 	.prepare = dsi_pll_28nm_vco_prepare_8226,

-- 
2.50.1

On Sun, Aug 10, 2025 at 06:57:28PM -0400, Brian Masney wrote:
> The round_rate() clk ops is deprecated, so migrate this driver from
> round_rate() to determine_rate() using the Coccinelle semantic patch
> on the cover letter of this series. The change to use clamp_t() was
> done manually.
> 
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 21 ++++++++++-----------
>  1 file changed, 10 insertions(+), 11 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

On 8/11/25 12:57 AM, Brian Masney wrote:
> The round_rate() clk ops is deprecated, so migrate this driver from
> round_rate() to determine_rate() using the Coccinelle semantic patch
> on the cover letter of this series. The change to use clamp_t() was
> done manually.
> 
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad