From: Arnd Bergmann <arnd@arndb.de>

A few old machines have not been converted away from the old-style
gpiolib interfaces. Make these select the new CONFIG_GPIOLIB_LEGACY
symbol so the code still works where it is needed but can be left
out otherwise.

This is the list of all gpio_request() calls in mips:

  arch/mips/alchemy/board-mtx1.c: rc = gpio_request(mtx1_gpio_button[0].gpio,
  arch/mips/alchemy/devboards/db1000.c:           gpio_request(19, "sd0_cd");
  arch/mips/alchemy/devboards/db1000.c:           gpio_request(20, "sd1_cd");
  arch/mips/alchemy/devboards/db1200.c:   gpio_request(215, "otg-vbus");
  arch/mips/bcm47xx/workarounds.c:        err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
  arch/mips/bcm63xx/boards/board_bcm963xx.c:              gpio_request_one(board.ephy_reset_gpio,
  arch/mips/txx9/rbtx4927/setup.c:        gpio_request(15, "sio-dtr");

Most of these should be easy enough to change to modern gpio descriptors
or remove if they are no longer in use.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/mips/Kconfig         | 5 +++++
 arch/mips/alchemy/Kconfig | 1 -
 arch/mips/txx9/Kconfig    | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index caf508f6e9ec..27f16c5b112a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -205,6 +205,8 @@ config MIPS_ALCHEMY
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
 	select DMA_NONCOHERENT		# Au1000,1500,1100 aren't, rest is
+	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select MIPS_FIXUP_BIGPHYS_ADDR if PCI
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -306,6 +308,7 @@ config BCM47XX
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select LEDS_GPIO_REGISTER
 	select BCM47XX_NVRAM
 	select BCM47XX_SPROM
@@ -329,6 +332,7 @@ config BCM63XX
 	select SYS_HAS_CPU_BMIPS4380
 	select SWAP_IO_SPACE
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select MIPS_L1_CACHE_SHIFT_4
 	select HAVE_LEGACY_CLK
 	help
@@ -981,6 +985,7 @@ config MIKROTIK_RB532
 	select SWAP_IO_SPACE
 	select BOOT_RAW
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select MIPS_L1_CACHE_SHIFT_4
 	help
 	  Support the Mikrotik(tm) RouterBoard 532 series,
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 6ca81e1bd35c..cf5ad52c0a0f 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -12,7 +12,6 @@ config MIPS_MTX1
 
 config MIPS_DB1XXX
 	bool "Alchemy DB1XXX / PB1XXX boards"
-	select GPIOLIB
 	select HAVE_PCI
 	select HAVE_PATA_PLATFORM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 7335efa4d528..92b759a434c0 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -37,6 +37,7 @@ config SOC_TX4927
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
+	select GPIOLIB_LEGACY
 
 config SOC_TX4938
 	bool
-- 
2.39.5