The active-semi,act8945a binding is documented in multiple places. The
charger child node is documented in regulator/active-semi,act8945a.yaml
and power/supply/active-semi,act8945a-charger.yaml. An old text binding
is in mfd/act8945a.txt.

Update the regulator/active-semi,act8945a.yaml with the additional
descriptions and constraints from
power/supply/active-semi,act8945a-charger.yaml, and then remove it and
mfd/act8945a.txt.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../devicetree/bindings/mfd/act8945a.txt      | 82 -------------------
 .../supply/active-semi,act8945a-charger.yaml  | 76 -----------------
 .../regulator/active-semi,act8945a.yaml       | 25 ++++--
 3 files changed, 19 insertions(+), 164 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt
 delete mode 100644 Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml

diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
deleted file mode 100644
index 5ca75d888b4a..000000000000
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Device-Tree bindings for Active-semi ACT8945A MFD driver
-
-Required properties:
- - compatible: "active-semi,act8945a".
- - reg: the I2C slave address for the ACT8945A chip
-
-The chip exposes two subdevices:
- - a regulators: see ../regulator/act8945a-regulator.txt
- - a charger: see ../power/act8945a-charger.txt
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
deleted file mode 100644
index 5220d9cb16d8..000000000000
--- a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
+++ /dev/null
@@ -1,76 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Active-semi ACT8945A Charger Function
-
-maintainers:
-  - Sebastian Reichel <sre@kernel.org>
-
-allOf:
-  - $ref: power-supply.yaml#
-
-properties:
-  compatible:
-    const: active-semi,act8945a-charger
-
-  interrupts:
-    maxItems: 1
-
-  active-semi,chglev-gpios:
-    maxItems: 1
-    description: charge current level GPIO
-
-  active-semi,lbo-gpios:
-    maxItems: 1
-    description: low battery voltage detect GPIO
-
-  active-semi,input-voltage-threshold-microvolt:
-    description: |
-      Specifies the charger's input over-voltage threshold value.
-      Despite the name, specified values are in millivolt (mV).
-      Defaults to 6.6 V
-    enum: [ 6600, 7000, 7500, 8000 ]
-
-  active-semi,precondition-timeout:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Specifies the charger's PRECONDITION safety timer setting value in minutes.
-      If 0, it means to disable this timer.
-      Defaults to 40 minutes.
-    enum: [ 0, 40, 60, 80 ]
-
-  active-semi,total-timeout:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Specifies the charger's total safety timer setting value in hours;
-      If 0, it means to disable this timer;
-      Defaults to 3 hours.
-    enum: [ 0, 3, 4, 5 ]
-
-required:
-  - compatible
-  - interrupts
-  - active-semi,chglev-gpios
-  - active-semi,lbo-gpios
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    pmic {
-      charger {
-        compatible = "active-semi,act8945a-charger";
-        interrupt-parent = <&pioA>;
-        interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-        active-semi,input-voltage-threshold-microvolt = <6600>;
-        active-semi,precondition-timeout = <40>;
-        active-semi,total-timeout = <3>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
index bdf3f7d34ef5..a8d579844dc7 100644
--- a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -91,28 +91,41 @@ properties:
         maxItems: 1
 
       active-semi,chglev-gpios:
-        description: CGHLEV GPIO
+        description: charge current level GPIO
         maxItems: 1
 
       active-semi,lbo-gpios:
-        description: LBO GPIO
+        description: low battery voltage detect GPIO
         maxItems: 1
 
       active-semi,input-voltage-threshold-microvolt:
-        description: Input voltage threshold
-        maxItems: 1
+        description:
+          Specifies the charger's input over-voltage threshold value. Despite
+          the name, specified values are in millivolt (mV).
+        enum: [ 6600, 7000, 7500, 8000 ]
+        default: 6600
 
       active-semi,precondition-timeout:
-        description: Precondition timeout
+        description:
+          Specifies the charger's PRECONDITION safety timer setting value in
+          minutes. If 0, it means to disable this timer.
+        enum: [ 0, 40, 60, 80 ]
+        default: 40
         $ref: /schemas/types.yaml#/definitions/uint32
 
       active-semi,total-timeout:
-        description: Total timeout
+        description:
+          Specifies the charger's total safety timer setting value in hours; If
+          0, it means to disable this timer;
+        enum: [ 0, 3, 4, 5 ]
+        default: 3
         $ref: /schemas/types.yaml#/definitions/uint32
 
     required:
       - compatible
       - interrupts
+      - active-semi,chglev-gpios
+      - active-semi,lbo-gpios
 
 additionalProperties: false
 
-- 
2.47.2

On Thu, 07 Aug 2025 16:44:57 -0500, Rob Herring (Arm) wrote:
> The active-semi,act8945a binding is documented in multiple places. The
> charger child node is documented in regulator/active-semi,act8945a.yaml
> and power/supply/active-semi,act8945a-charger.yaml. An old text binding
> is in mfd/act8945a.txt.
> 
> Update the regulator/active-semi,act8945a.yaml with the additional
> descriptions and constraints from
> power/supply/active-semi,act8945a-charger.yaml, and then remove it and
> mfd/act8945a.txt.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: dt-bindings: Clean-up active-semi,act8945a duplication
      commit: a54ef14188519a0994d0264f701f5771815fa11e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark