The phyCORE-AM62Ax is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
7.5 of the SoC's data sheet[0]. Append the 1.4Ghz entry to the OPP table
to enable this OPP

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 5dc5d2cb20cc..207ca00630d1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -200,6 +200,15 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
 	};
 };
 
+&a53_opp_table {
+	/* Requires VDD_CORE at 0v85 */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+		clock-latency-ns = <6000000>;
+	};
+};
+
 &c7x_0 {
 	mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
 	memory-region = <&c7x_0_dma_memory_region>,
-- 
2.48.1

The phyCORE-AM62Ax is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
7.5 of the SoC's data sheet[0]. Append the 1.4Ghz entry to the OPP table
to enable this OPP

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 5dc5d2cb20cc..207ca00630d1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -200,6 +200,15 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
 	};
 };
 
+&a53_opp_table {
+	/* Requires VDD_CORE at 0v85 */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+		clock-latency-ns = <6000000>;
+	};
+};
+
 &c7x_0 {
 	mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
 	memory-region = <&c7x_0_dma_memory_region>,
-- 
2.48.1

Hi Wadim Egorov,

On Tue, 05 Aug 2025 11:00:21 +0200, Wadim Egorov wrote:
> The phyCORE-AM62Ax is capable of supplying 0v85 to the VDD_CORE
> which allows the Cortex-A53s to operate at 1.4GHz according to chapter
> 7.5 of the SoC's data sheet[0]. Append the 1.4Ghz entry to the OPP table
> to enable this OPP
> 
> [0] https://www.ti.com/lit/ds/symlink/am62a3.pdf
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am62a-phycore-som: Add 1.4GHz opp entry
      commit: f13db4f77d54a6db644f09a168919ad1b3432f52

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource