From: Alex Guo <alexguo1023@gmail.com>

The data->block[0] variable comes from user. Without proper check,
the variable may be very large to cause an out-of-bounds bug.

Fix this bug by checking the value of data->block[0] first.

1. commit 39244cc75482 ("i2c: ismt: Fix an out-of-bounds bug in
   ismt_access()")
2. commit 92fbb6d1296f ("i2c: xgene-slimpro: Fix out-of-bounds bug in
   xgene_slimpro_i2c_xfer()")

Cc: <stable@vger.kernel.org>
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
 drivers/i2c/busses/i2c-rtl9300.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c
index e064e8a4a1f0824abc82fa677866b85f99fbe4a7..568495720810b373c4fa3b31d3f4cdec7c64b5f9 100644
--- a/drivers/i2c/busses/i2c-rtl9300.c
+++ b/drivers/i2c/busses/i2c-rtl9300.c
@@ -281,6 +281,10 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 		ret = rtl9300_i2c_reg_addr_set(i2c, command, 1);
 		if (ret)
 			goto out_unlock;
+		if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			ret = -EINVAL;
+			goto out_unlock;
+		}
 		ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0]);
 		if (ret)
 			goto out_unlock;

-- 
2.47.2