1. Patchew
  2. linux
  3. [PATCH 0/6] ASpeed FSI DT clean-ups
  4. View patch

[PATCH 5/6] dt-bindings: fsi: Convert fsi-master-gpio to DT schema

Rob Herring (Arm) posted 6 patches 6 months, 1 week ago
[PATCH 5/6] dt-bindings: fsi: Convert fsi-master-gpio to DT schema
Posted by Rob Herring (Arm) 6 months, 1 week ago 
Convert the GPIO-based FSI master binding to DT schema format.

Drop the "fsi-master" compatible as it has not be used consistently and
doesn't represent anything.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../devicetree/bindings/fsi/fsi-master-gpio.txt    | 28 ----------
 .../devicetree/bindings/fsi/fsi-master-gpio.yaml   | 63 ++++++++++++++++++++++
 2 files changed, 63 insertions(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
deleted file mode 100644
index 1e442450747f..000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-tree bindings for gpio-based FSI master driver
------------------------------------------------------
-
-Required properties:
- - compatible = "fsi-master-gpio";
- - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
- - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
-
-Optional properties:
- - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
- - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
- - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
-                                          functions (eg, external FSI masters)
- - no-gpio-delays;			: Don't add extra delays between GPIO
-                                          accesses. This is useful when the HW
-					  GPIO block is running at a low enough
-					  frequency.
-
-Examples:
-
-    fsi-master {
-        compatible = "fsi-master-gpio", "fsi-master";
-        clock-gpios = <&gpio 0>;
-        data-gpios = <&gpio 1>;
-        enable-gpios = <&gpio 2>;
-        trans-gpios = <&gpio 3>;
-        mux-gpios = <&gpio 4>;
-    }
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
new file mode 100644
index 000000000000..21bfbad595b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-master-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: fsi-master-gpio
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: /schemas/fsi/fsi-controller.yaml
+
+properties:
+  compatible:
+    items:
+      - const: fsi-master-gpio
+
+  clock-gpios:
+    description: GPIO for FSI clock
+    maxItems: 1
+
+  data-gpios:
+    description: GPIO for FSI data signal
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO for enable signal
+    maxItems: 1
+
+  trans-gpios:
+    description: GPIO for voltage translator enable
+    maxItems: 1
+
+  mux-gpios:
+    description: GPIO for pin multiplexing with other functions (eg, external
+      FSI masters)
+    maxItems: 1
+
+  no-gpio-delays:
+    description:
+      Don't add extra delays between GPIO accesses. This is useful when the HW
+      GPIO block is running at a low enough frequency.
+    type: boolean
+
+required:
+  - compatible
+  - clock-gpios
+  - data-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi-master {
+        compatible = "fsi-master-gpio";
+        clock-gpios = <&gpio 0>;
+        data-gpios = <&gpio 1>;
+        enable-gpios = <&gpio 2>;
+        trans-gpios = <&gpio 3>;
+        mux-gpios = <&gpio 4>;
+    };

-- 
2.47.2
Re: [PATCH 5/6] dt-bindings: fsi: Convert fsi-master-gpio to DT schema
Posted by Eddie James 6 months, 1 week ago 
On 7/31/25 17:12, Rob Herring (Arm) wrote:
> Convert the GPIO-based FSI master binding to DT schema format.
>
> Drop the "fsi-master" compatible as it has not be used consistently and
> doesn't represent anything.


Acked-by: Eddie James <eajames@linux.ibm.com>


>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>   .../devicetree/bindings/fsi/fsi-master-gpio.txt    | 28 ----------
>   .../devicetree/bindings/fsi/fsi-master-gpio.yaml   | 63 ++++++++++++++++++++++
>   2 files changed, 63 insertions(+), 28 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
> deleted file mode 100644
> index 1e442450747f..000000000000
> --- a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -Device-tree bindings for gpio-based FSI master driver
> ------------------------------------------------------
> -
> -Required properties:
> - - compatible = "fsi-master-gpio";
> - - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
> - - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
> -
> -Optional properties:
> - - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
> - - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
> - - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
> -                                          functions (eg, external FSI masters)
> - - no-gpio-delays;			: Don't add extra delays between GPIO
> -                                          accesses. This is useful when the HW
> -					  GPIO block is running at a low enough
> -					  frequency.
> -
> -Examples:
> -
> -    fsi-master {
> -        compatible = "fsi-master-gpio", "fsi-master";
> -        clock-gpios = <&gpio 0>;
> -        data-gpios = <&gpio 1>;
> -        enable-gpios = <&gpio 2>;
> -        trans-gpios = <&gpio 3>;
> -        mux-gpios = <&gpio 4>;
> -    }
> diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
> new file mode 100644
> index 000000000000..21bfbad595b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/fsi-master-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: fsi-master-gpio
> +
> +maintainers:
> +  - Eddie James <eajames@linux.ibm.com>
> +
> +allOf:
> +  - $ref: /schemas/fsi/fsi-controller.yaml
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: fsi-master-gpio
> +
> +  clock-gpios:
> +    description: GPIO for FSI clock
> +    maxItems: 1
> +
> +  data-gpios:
> +    description: GPIO for FSI data signal
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description: GPIO for enable signal
> +    maxItems: 1
> +
> +  trans-gpios:
> +    description: GPIO for voltage translator enable
> +    maxItems: 1
> +
> +  mux-gpios:
> +    description: GPIO for pin multiplexing with other functions (eg, external
> +      FSI masters)
> +    maxItems: 1
> +
> +  no-gpio-delays:
> +    description:
> +      Don't add extra delays between GPIO accesses. This is useful when the HW
> +      GPIO block is running at a low enough frequency.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - clock-gpios
> +  - data-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    fsi-master {
> +        compatible = "fsi-master-gpio";
> +        clock-gpios = <&gpio 0>;
> +        data-gpios = <&gpio 1>;
> +        enable-gpios = <&gpio 2>;
> +        trans-gpios = <&gpio 3>;
> +        mux-gpios = <&gpio 4>;
> +    };
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.