From: Fenglin Wu <fenglin.wu@oss.qualcomm.com>

The 3-channel flash module in PMI8998 has several registers different
than the others, such as: torch_clamp. Add different register fields
for it.

Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
---
 drivers/leds/flash/leds-qcom-flash.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
index db7c2c743adc755244f387febce663738bf3c0bd..b03a6833e3e3a076980bfcb46d5bbde4f4183a19 100644
--- a/drivers/leds/flash/leds-qcom-flash.c
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -118,6 +118,22 @@ enum {
 	REG_MAX_COUNT,
 };
 
+static const struct reg_field mvflash_3ch_pmi8998_regs[REG_MAX_COUNT] = {
+	[REG_STATUS1]		= REG_FIELD(0x08, 0, 5),
+	[REG_STATUS2]		= REG_FIELD(0x09, 0, 7),
+	[REG_STATUS3]		= REG_FIELD(0x0a, 0, 7),
+	[REG_CHAN_TIMER]	= REG_FIELD_ID(0x40, 0, 7, 3, 1),
+	[REG_ITARGET]		= REG_FIELD_ID(0x43, 0, 6, 3, 1),
+	[REG_MODULE_EN]		= REG_FIELD(0x46, 7, 7),
+	[REG_IRESOLUTION]	= REG_FIELD(0x47, 0, 5),
+	[REG_CHAN_STROBE]	= REG_FIELD_ID(0x49, 0, 2, 3, 1),
+	[REG_CHAN_EN]		= REG_FIELD(0x4c, 0, 2),
+	[REG_THERM_THRSH1]	= REG_FIELD(0x56, 0, 2),
+	[REG_THERM_THRSH2]	= REG_FIELD(0x57, 0, 2),
+	[REG_THERM_THRSH3]	= REG_FIELD(0x58, 0, 2),
+	[REG_TORCH_CLAMP]	= REG_FIELD(0xea, 0, 6),
+};
+
 static const struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
 	[REG_STATUS1]		= REG_FIELD(0x08, 0, 7),
 	[REG_STATUS2]		= REG_FIELD(0x09, 0, 7),
@@ -862,13 +878,20 @@ static int qcom_flash_led_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	if (val == FLASH_SUBTYPE_3CH_PM8150_VAL || val == FLASH_SUBTYPE_3CH_PMI8998_VAL) {
+	if (val == FLASH_SUBTYPE_3CH_PM8150_VAL) {
 		flash_data->hw_type = QCOM_MVFLASH_3CH;
 		flash_data->max_channels = 3;
 		regs = devm_kmemdup(dev, mvflash_3ch_regs, sizeof(mvflash_3ch_regs),
 				    GFP_KERNEL);
 		if (!regs)
 			return -ENOMEM;
+	} else if (val == FLASH_SUBTYPE_3CH_PMI8998_VAL) {
+		flash_data->hw_type = QCOM_MVFLASH_3CH;
+		flash_data->max_channels = 3;
+		regs = devm_kmemdup(dev, mvflash_3ch_pmi8998_regs,
+				    sizeof(mvflash_3ch_pmi8998_regs), GFP_KERNEL);
+		if (!regs)
+			return -ENOMEM;
 	} else if (val == FLASH_SUBTYPE_4CH_VAL) {
 		flash_data->hw_type = QCOM_MVFLASH_4CH;
 		flash_data->max_channels = 4;

-- 
2.34.1

On 7/29/25 6:51 AM, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
> 
> The 3-channel flash module in PMI8998 has several registers different
> than the others, such as: torch_clamp. Add different register fields
> for it.
> 
> Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad