On some Qualcomm platforms such as QCS6490-RB3Gen2, the multiple
WSA8830/WSA8835 speakers share a common reset (shutdown) GPIO.
To handle such cases, use the reset controller framework along
with the "reset-gpio" driver.

Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 sound/soc/codecs/wsa883x.c | 55 +++++++++++++++++++++++++++++++++-----
 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
index d5bc71b28a3a..0acf111f9583 100644
--- a/sound/soc/codecs/wsa883x.c
+++ b/sound/soc/codecs/wsa883x.c
@@ -469,6 +469,7 @@ struct wsa883x_priv {
 	struct sdw_stream_runtime *sruntime;
 	struct sdw_port_config port_config[WSA883X_MAX_SWR_PORTS];
 	struct gpio_desc *sd_n;
+	struct reset_control *sd_reset;
 	bool port_prepared[WSA883X_MAX_SWR_PORTS];
 	bool port_enable[WSA883X_MAX_SWR_PORTS];
 	int active_ports;
@@ -1547,6 +1548,24 @@ static const struct hwmon_chip_info wsa883x_hwmon_chip_info = {
 	.info	= wsa883x_hwmon_info,
 };
 
+static void wsa883x_reset_assert(void *data)
+{
+	struct wsa883x_priv *wsa883x = data;
+
+	if (wsa883x->sd_reset)
+		reset_control_assert(wsa883x->sd_reset);
+	else
+		gpiod_direction_output(wsa883x->sd_n, 1);
+}
+
+static void wsa883x_reset_deassert(struct wsa883x_priv *wsa883x)
+{
+	if (wsa883x->sd_reset)
+		reset_control_deassert(wsa883x->sd_reset);
+	else
+		gpiod_direction_output(wsa883x->sd_n, 0);
+}
+
 static void wsa883x_regulator_disable(void *data)
 {
 	struct wsa883x_priv *wsa883x = data;
@@ -1554,6 +1573,28 @@ static void wsa883x_regulator_disable(void *data)
 	regulator_disable(wsa883x->vdd);
 }
 
+static int wsa883x_get_reset(struct device *dev, struct wsa883x_priv *wsa883x)
+{
+	wsa883x->sd_reset = devm_reset_control_get_optional_shared_deasserted(dev, NULL);
+	if (IS_ERR(wsa883x->sd_reset))
+		return dev_err_probe(dev, PTR_ERR(wsa883x->sd_reset),
+				     "Failed to get reset\n");
+	/*
+	 * if sd_reset: NULL, so use the backwards compatible way for powerdown-gpios,
+	 * which does not handle sharing GPIO properly.
+	 */
+	if (!wsa883x->sd_reset) {
+		wsa883x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
+							GPIOD_FLAGS_BIT_NONEXCLUSIVE |
+							GPIOD_OUT_HIGH);
+		if (IS_ERR(wsa883x->sd_n))
+			return dev_err_probe(dev, PTR_ERR(wsa883x->sd_n),
+					     "Shutdown Control GPIO not found\n");
+	}
+
+	return 0;
+}
+
 static int wsa883x_probe(struct sdw_slave *pdev,
 			 const struct sdw_device_id *id)
 {
@@ -1583,11 +1624,9 @@ static int wsa883x_probe(struct sdw_slave *pdev,
 	if (ret)
 		return ret;
 
-	wsa883x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
-						GPIOD_FLAGS_BIT_NONEXCLUSIVE | GPIOD_OUT_HIGH);
-	if (IS_ERR(wsa883x->sd_n))
-		return dev_err_probe(dev, PTR_ERR(wsa883x->sd_n),
-				     "Shutdown Control GPIO not found\n");
+	ret = wsa883x_get_reset(dev, wsa883x);
+	if (ret)
+		return ret;
 
 	dev_set_drvdata(dev, wsa883x);
 	wsa883x->slave = pdev;
@@ -1610,7 +1649,11 @@ static int wsa883x_probe(struct sdw_slave *pdev,
 	pdev->prop.simple_clk_stop_capable = true;
 	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
 	pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
-	gpiod_direction_output(wsa883x->sd_n, 0);
+
+	wsa883x_reset_deassert(wsa883x);
+	ret = devm_add_action_or_reset(dev, wsa883x_reset_assert, wsa883x);
+	if (ret)
+		return ret;
 
 	wsa883x->regmap = devm_regmap_init_sdw(pdev, &wsa883x_regmap_config);
 	if (IS_ERR(wsa883x->regmap))
-- 
2.34.1